PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330102-00-11-10-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm armored standard-mount probe with 1.1 in imperial case
Bently Nevada 330102-00-11-10-01-05 is an armored 3300 XL 8 mm probe with a 1.1-inch case and one-metre total length. The case-length code 11 must be read in its correct position; this assembly uses standard cable with a protected ClickLoc connector.
For machinery monitoring, the probe forms the non-contact sensing element of a compatible Proximitor channel rather than a complete transmitter. Check the imperial mounting interface, total electrical length and applicable approval conditions, particularly when replacing another short-case probe with a similar-looking order code.
For machinery monitoring, the probe forms the non-contact sensing element of a compatible Proximitor channel rather than a complete transmitter. Check the imperial mounting interface, total electrical length and applicable approval conditions, particularly when replacing another short-case probe with a similar-looking order code.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330102-00-11-10-01-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · POSITION MEASUREMENT
Non-contact machinery position channels
Within the documented transducer architecture, the short-case probe senses distance to a conductive target. Static position measurements require a suitable working gap, target and correctly configured Proximitor sensor rather than direct wiring as a transmitter. -
02 · VIBRATION MONITORING
Fluid-film bearing shaft displacement
The family is designed for vibration measurement on fluid-film bearing machinery. An installation using this probe must satisfy mechanical clearance and shaft geometry requirements while preserving the specified complete electrical system length. -
03 · REFERENCE SIGNALS
Rotational timing and speed observation
Keyphasor reference and speed are documented family applications. The target and monitor must suit the intended measurement, and an overspeed duty requires the manufacturer's additional guidance before the signal is used in a protection design.
Technical specifications for 330102-00-11-10-01-05
-
Product Model330102-00-11-10-01-05
-
Product ParametersArmored proximity transducer probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF-2A
-
Unthreaded length0.0 in
-
Overall case length1.1 in
-
Total probe length1.0 m
-
Armor constructionFlexible AISI 302 or 304 stainless steel with FEP jacket
-
Cable construction75 ohm triaxial cable with FEP insulation
-
TerminationMiniature coaxial ClickLoc with connector protector
-
Tip diameter8.0 mm
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Temperature range-52 to +177 deg C operating/storage; pressure-seal caution below -34 deg C
-
Nominal probe DC resistance7.59 +/- 0.50 ohm from center conductor to outer conductor
-
Probe case-to-lead tensile rating330 N maximum rated
-
Approval option05: CSA, ATEX and IECEx; verify certificate conditions
View all additional
Alternative Names
330102-00-11-10-01-05 armored probe
1.1-inch case 1 m proximity probe
3300 XL 8 mm short-case armored probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM PROXIMITY TRANSDUCER
Match the complete probe and measurement channel
This probe supplies non-contact sensing to a compatible 3300 XL Proximitor channel. The manufacturer's electrical performance values refer to the configured probe, any required extension cable and sensor under the documented target and installation conditions.
The 11 field denotes a 1.1-inch case because it occupies the case-length position. The connector/cable field is 01, so this is a protected standard-cable configuration, not a FluidLoc selection despite the occurrence of 11 elsewhere in the order.
Check the 3/8-24 imperial mounting thread, allowable engagement, conductive target and required total electrical length. The short case and armor do not alter the standard temperature limits or eliminate certificate verification for the final 05 approval option.
Features:
- Field position determines the meaning of 11
- Imperial thread must match the mounting
- The installed sensing chain defines performance
The Bently Nevada 330102-00-11-10-01-05 proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
A similar short-case probe can have a different thread, length or cable option. Match the 1.1-inch case, armor, one-metre total length and protected standard-cable termination before treating another product as a replacement.
The official backward-compatibility notes permit specified XL/non-XL combinations but limit a mixed system to non-XL performance. Check the entire installed measuring chain rather than judging interchangeability only by the probe tip or connector.
No exact-order revision, retirement date or designated replacement was established by the official evidence reviewed here. Leave those entries unfilled and seek a documented technical match before claiming unconditional substitution.
Features:
- Distinguish case-length codes from cable codes
- Match thread and complete electrical length
- Require evidence for revision or replacement claims
The Bently Nevada 330102-00-11-10-01-05 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330102-00-11-10-01-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330102-00-11-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the 11 field make this a FluidLoc probe?
No. In this order, 11 occupies the B case-length position and means 1.1 inches. The D connector/cable field is 01, which specifies standard cable with a ClickLoc connector and protector. -
Can a 1.0-inch case replace the 1.1-inch case without checking fit?
No. The official ordering table distinguishes case lengths in 0.1-inch increments. Mechanical fit and the required installed position must be checked before selecting another length; the datasheet does not declare the two full orders drop-in equivalents. -
Is this the metric M10 x 1 probe?
No. The 330102 base identifies the armored 3/8-24 UNF probe. The metric M10 x 1 armored construction is a different base selection in the manufacturer's ordering table and should not be substituted by appearance. -
What is the electrical resistance for the one-metre assembly?
For a one-metre probe, the nominal DC resistance between center and outer conductors is 7.59 +/- 0.50 ohm. Do not use an extension-cable resistance table as the probe's value. -
Can the cable and probe tip tolerate the same standard temperature range?
The standard probe's operating/storage range is -52 to +177 degrees Celsius. The manufacturer separately cautions that temperatures below -34 degrees Celsius may cause premature pressure-seal failure, even within that general range. -
How close can another axial-position probe be installed?
The datasheet gives generally at least 40 mm tip separation for axial position measurements under its stated geometry and gap conditions. Check the full layout and shaft diameter before treating that distance as sufficient. -
What must remain matched when a probe is replaced?
Keep the case and thread, total probe length, armor, cable/connector option and approval selection consistent with the installed system. The complete probe/cable/Proximitor configuration determines performance, and mixed XL/non-XL components have lower applicable limits.
READY TO VERIFY YOUR PART?
Get a 330102-00-11-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
