PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330102-00-85-10-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm armored probe with 8.5 in imperial case
Bently Nevada 330102-00-85-10-01-05 is the 8.5-inch-case configuration of the armored 3300 XL 8 mm proximity probe. The complete order specifies zero unthreaded length, a one-metre total probe assembly, standard cable and a miniature ClickLoc connector supplied with protection.
Its role is to sense a conductive target within the manufacturer's proximity transducer architecture, supporting appropriate vibration and position channels. Mechanical case length, permissible thread engagement and complete electrical system length are separate checks, and the final 05 code identifies the specified approval option.
Its role is to sense a conductive target within the manufacturer's proximity transducer architecture, supporting appropriate vibration and position channels. Mechanical case length, permissible thread engagement and complete electrical system length are separate checks, and the final 05 code identifies the specified approval option.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330102-00-85-10-01-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 330102-00-85-10-01-05
-
Product Model330102-00-85-10-01-05
-
Product ParametersArmored vibration sensing probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Case thread3/8-24 UNF-2A
-
Unthreaded case section0.0 in
-
Overall case length8.5 in
-
Total probe length1.0 m
-
Armor constructionFlexible AISI 302 or 304 stainless steel with FEP jacket
-
Probe cable construction75 ohm triaxial with FEP insulation
-
Connector packageMiniature coaxial ClickLoc with connector protector
-
Probe tip diameter8.0 mm
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Standard temperature rating-52 to +177 deg C operating/storage; pressure-seal warning below -34 deg C
-
Nominal DC resistance7.59 +/- 0.50 ohm, center conductor to outer conductor
-
Case-to-cable tensile rating330 N maximum rated
-
Agency approval option05: CSA, ATEX and IECEx
View all additional
Alternative Names
330102-00-85-10-01-05 armored probe
8.5-inch case 1 m proximity assembly
3300 XL 8 mm long-case sensing probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM PROXIMITY TRANSDUCER
Match the complete probe and measurement channel
An installed 3300 XL 8 mm measurement system combines the probe with the appropriate Proximitor sensor and any required extension cable. The system, rather than this probe alone, supplies the proportional voltage used for vibration or position measurement.
The 85 option identifies an 8.5-inch case, while 10 identifies one metre of total probe length. Neither field defines the exposed cable length, and the long case must not be treated as permission to exceed the published thread engagement limit.
Select the target, gap and channel layout using the official system conditions. The final 05 option is separate from the preceding 00 unthreaded-length field; confirm actual certification, standard-cable temperature limits and connector protection before installation.
Features:
- Probe length is not exposed cable length
- Long cases retain the standard engagement limit
- The final approval field is 05
The Bently Nevada 330102-00-85-10-01-05 proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the full order during replacement, especially the 8.5-inch case and final 05 approval field. A description that treats the earlier 00 field as the approval suffix is incorrect and must not be used to choose a substitute.
Retain the armor, standard cable, one-metre total length and protected connector needed by the installed configuration. Any mixed XL/non-XL channel must be assessed against the lower non-XL performance specification stated by Bently Nevada.
No exact-model hardware revision, discontinuation date or approved successor was found in the reviewed official documents. Keep these fields unfilled and require a documented compatibility review for any proposed different order code.
Features:
- Verify every ordering field in its correct position
- Preserve the full mechanical and electrical configuration
- Confirm approval conditions before substitution
The Bently Nevada 330102-00-85-10-01-05 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330102-00-85-10-01-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330102-00-85-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is the final approval code 05 or 00 on this product?
It is 05. The 00 field immediately after 330102 describes unthreaded length, while the final 05 field selects CSA, ATEX and IECEx approvals. These positions must not be confused when checking supplier descriptions. -
Is an 8.5-inch case permitted for the 330102 family?
Yes. The official case-length range is 0.8 to 9.6 inches in 0.1-inch steps, so option 85 is supported. Availability of the supplied unit and its serial-specific build record are separate commercial checks. -
Is the one-metre total length the same as the exposed cable length?
No. The ordering table calls it total probe length, and Figure 14 distinguishes total length from case length. Do not describe the 10 option as one metre of exposed cable without the actual assembly drawing. -
Can the full long threaded case be engaged in a support?
The manufacturer limits 3/8-24 thread engagement to 0.563 inch. A long overall case does not override this limit; excessive engagement can bind and may fall outside warranty coverage. -
How is the protected connector fitted to another XL connector?
The mating gold ClickLoc connectors are finger-tightened according to the official instructions. Preserve the connector protector and follow the different instruction if mating to a non-XL stainless-steel connector. -
Is this probe pressure-tested before shipment?
The family datasheet states that probes are not pressure-tested before shipment. Applications requiring a verified pressure seal must be discussed with Bently Nevada, and leakage containment remains an installation responsibility. -
Can a temperature above the standard rating be accepted because armor is present?
No. Armor is a construction option, not an extended-temperature rating. The standard probe limit remains +177 degrees Celsius; ETR designs have separate specifications and must be selected explicitly.
READY TO VERIFY YOUR PART?
Get a 330102-00-85-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
3300/55-03-01-15-15-00-00-01-00Dual velocity monitoring moduleManufacturer: Bently NevadaView Details
-
3300/55-01-04-18-18-00-00-05-00Dual velocity monitoring moduleManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
