PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330102-00-80-10-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm standard-mount proximity probe, 3/8-24 UNF-2A, with armor
Bently Nevada 330102-00-80-10-01-05 combines an eight-inch imperial probe case with an armored, one-metre total assembly for 3300 XL 8 mm measurements. Standard cable and a protected ClickLoc connector are specified by this complete ordering configuration.
Its sensing role covers conductive-target vibration and position measurement when connected to the correct Proximitor channel. The long case requires a suitable mounting arrangement, while cable bend radius, thread engagement and electrical system length remain separate constraints that must be checked during replacement.
Its sensing role covers conductive-target vibration and position measurement when connected to the correct Proximitor channel. The long case requires a suitable mounting arrangement, while cable bend radius, thread engagement and electrical system length remain separate constraints that must be checked during replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330102-00-80-10-01-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · SHAFT VIBRATION
Bearing monitoring with an extended case
The armored probe serves as the noncontact sensing element in a fluid-film bearing vibration channel. Its eight-inch case is a mounting selection, not evidence of a different sensing range or a standalone vibration-transmitter output. -
02 · AXIAL POSITION
Conductive target position measurement
Used with the appropriate Proximitor configuration, the probe monitors static movement relative to a conductive target. The installer must maintain permissible gap and geometry while accommodating the longer case and armored cable route. -
03 · MACHINE REFERENCE
Keyphasor input for rotating equipment
A documented family use is phase-reference acquisition for machinery monitoring. Confirm the reference target and complete channel before applying the probe; additional overspeed guidance is required for protection applications.
Technical specifications for 330102-00-80-10-01-05
-
Product Model330102-00-80-10-01-05
-
Product ParametersArmored proximity sensing probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF-2A
-
Unthreaded length0.0 in
-
Overall case length8.0 in
-
Total probe length1.0 m
-
Cable armorArmored
-
Probe cable construction75-ohm triaxial cable with FEP insulation
-
Connector packageMiniature coaxial ClickLoc with connector protector
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Probe temperature range-52 to +177 deg C; pressure-seal caveat below -34 deg C
-
Nominal probe DC resistance7.59 +/- 0.50 ohm, center to outer conductor
-
Probe case-to-lead tensile rating330 N maximum rated
-
Minimum cable bend radius25.4 mm
-
Approval ordering optionCSA, ATEX and IECEx ordering option
View all additional
Alternative Names
330102-00-80-10-01-05 proximity probe
8.0 in imperial armored sensing probe
3300 XL 8 mm 1.0 m imperial probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM
3300 XL 8 mm proximity measurement chain
This 8.0 in imperial case provides the mechanical mounting arrangement for 330102-00-80-10-01-05. The complete 3300 XL 8 mm measuring chain combines the sensing probe with a compatible Proximitor and an extension cable where required; output specifications describe that assembled chain.
The selected total probe length is 1.0 m, separate from the 0.0 in unthreaded portion and overall case length. Match the intended electrical system length rather than relying on physical connector fit or treating the probe as a standalone transmitter.
Check 3/8-24 UNF-2A mounting with no more than 0.563 in specified thread engagement and maintain at least 25.4 mm cable bend radius. The selected connector includes a protector, but all remaining connections still require environmental review.
Features:
- Match probe length to the Proximitor chain
- 0.563 in maximum specified thread engagement
- Conductive target and connector conditions matter
The Bently Nevada 330102-00-80-10-01-05 Noncontact proximity sensing probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the complete 330102-00-80-10-01-05 configuration when assessing a replacement: 8.0 in overall case, 1.0 m total length and armored cable. A matching sensing diameter does not establish identical case geometry, connection package or electrical length.
Bently Nevada documents physical and electrical interchangeability with certain non-XL 3300 5 mm and 8 mm components. However, mixing those components with XL parts limits the system to the non-XL performance specification; review the retained channel before claiming equivalent accuracy.
No exact hardware revision, withdrawal date or designated successor was confirmed for this order. Verify the required approval selection against the supplied certificate and complete installation. Recheck the configured measurement channel after an approved change.
Features:
- Retain every mechanical and electrical option
- Mixed XL/non-XL performance is restricted
- No unconditional successor confirmed
The Bently Nevada 330102-00-80-10-01-05 Noncontact proximity sensing probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330102-00-80-10-01-05 Noncontact proximity sensing probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330102-00-80-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the 80 case option mean on this armored probe?
The imperial ordering table defines 80 as an 8.0-inch overall case. The following 10 is a one-metre total probe length, not another case dimension. -
Can the armored lead be bent sharply near the mount?
No. The manufacturer specifies a minimum cable bend radius of 25.4 mm. Armor does not justify tighter routing or removal of the stated bend-radius requirement. -
What is the armor construction for 330102?
The applicable probe family uses flexible AISI 302 or 304 stainless steel armor with an FEP outer jacket. The exact alloy alternative for an individual delivered assembly is not separately identified in the datasheet. -
Does the eight-inch case permit eight inches of threaded engagement?
No. The stated engagement limit for 3/8-24 probes is 0.563 inch. Longer engagement can bind and requires consultation with Bently Nevada. -
Is this the FluidLoc version for restricting liquid passage through the cable?
No. Option 01 selects standard cable with a connector protector. FluidLoc is a different cable option, identified by 11 or 12 in the ordering table. -
Which temperature rating applies to this standard probe?
The standard probe operating and storage range is -52 to +177 degrees C. The manufacturer warns that exposure below -34 degrees C may cause premature pressure-seal failure; extended-temperature ratings must not be applied to this order. -
What must match when replacing this long-case assembly?
Match the complete imperial case configuration, one-metre total length, armor, connector package and approval option. Then check the retained cable and Proximitor against the documented full-system requirements.
READY TO VERIFY YOUR PART?
Get a 330102-00-80-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
