PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330102-00-70-10-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm armored imperial probe with 7.0 in overall case
Bently Nevada 330102-00-70-10-01-05 has a seven-inch case, zero unthreaded length and armored cable construction within the 3300 XL 8 mm family. Its one-metre total length and protected ClickLoc connector identify the required probe configuration independently of the installation's mounting depth.
Used with the properly selected Proximitor sensor, this probe supports machinery vibration, position or rotational-reference measurements. The longer case does not increase the permitted thread engagement or measurement range; those limits remain governed by the manufacturer's mounting and complete-system specifications.
Used with the properly selected Proximitor sensor, this probe supports machinery vibration, position or rotational-reference measurements. The longer case does not increase the permitted thread engagement or measurement range; those limits remain governed by the manufacturer's mounting and complete-system specifications.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330102-00-70-10-01-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · POSITION CHANNELS
Non-contact static shaft position
The family measures the distance from its probe tip to a conductive machine surface. A correctly selected mounting and transducer system can therefore provide a static-position channel without mechanically contacting the target. -
02 · ROTATIONAL REFERENCE
Keyphasor signals for machine monitoring
The manufacturer includes Keyphasor reference and speed measurements in the system's primary applications. The selected target and downstream channel must be reviewed for the intended speed task, including the additional overspeed application guidance where relevant. -
03 · BEARING VIBRATION
Dynamic shaft displacement measurement
At fluid-film bearing measurement locations, the probe type supports the system's dynamic vibration measurement. The seven-inch case is a mechanical configuration; it does not change the documented target, spacing or electrical-system requirements.
Technical specifications for 330102-00-70-10-01-05
-
Product Model330102-00-70-10-01-05
-
Product ParametersArmored shaft proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Case thread3/8-24 UNF-2A
-
Unthreaded section0.0 in
-
Overall case length7.0 in
-
Total probe length1.0 m
-
Armor materialFlexible AISI 302 or 304 stainless steel, FEP jacket
-
Probe cable75 ohm triaxial with FEP insulation
-
Connector configurationMiniature ClickLoc coaxial connector with protector
-
Tip diameter8.0 mm
-
Tip polymerPolyphenylene sulfide (PPS)
-
Case metalAISI 303 or 304 stainless steel
-
Operating and storage limits-52 to +177 deg C; pressure-seal caution below -34 deg C
-
Nominal conductor resistance7.59 +/- 0.50 ohm, center to outer conductor
-
Case-to-lead tensile limit330 N maximum rated
-
Approval ordering code05: CSA, ATEX and IECEx; check applicable conditions
View all additional
Alternative Names
330102-00-70-10-01-05 proximity probe
7.0-inch armored 1 m sensing probe
3300 XL 8 mm seven-inch case probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM PROXIMITY TRANSDUCER
Match the complete probe and measurement channel
The probe senses a conductive surface as part of a 3300 XL proximity transducer chain. The Proximitor sensor provides the documented system output, with any required extension cable selected for the complete electrical length.
Although this order has a seven-inch case, its total probe length is one metre. The long case does not grant greater thread engagement or expand the measurement range; the standard mounting and complete-system performance requirements still govern installation.
Confirm the shaft or target geometry, installed gap and separation from adjacent probes. Keep the protected ClickLoc connection intact, and verify that the supplied unit's 05 certification and circuit conditions are suitable for the application.
Features:
- Seven-inch case is a mechanical option
- One-metre probe length determines electrical selection
- Target and mounting checks remain mandatory
The Bently Nevada 330102-00-70-10-01-05 proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
A replacement with another long case must not be accepted merely because the mounting thread matches. Compare the 70 case option, zero unthreaded length, total probe length, armor, connector protection and approval selection.
Bently Nevada permits the specified XL/non-XL component interchangeability, subject to lower non-XL limits when the technologies are mixed. Reassess the installed channel's performance and calibration assumptions if any component differs.
The reviewed official documents do not provide an exact-model discontinuation date, hardware revision or designated successor. Retain that uncertainty and obtain documented replacement guidance before claiming a newer part is fully interchangeable.
Features:
- Compare the entire 70-case configuration
- Check mixed-system performance limits
- Require evidence for any proposed successor
The Bently Nevada 330102-00-70-10-01-05 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330102-00-70-10-01-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330102-00-70-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does case option 70 mean a seven-metre sensor?
No. B option 70 denotes a 7.0-inch case. The C option is 10, which denotes a one-metre total probe length. The fields must be decoded separately from the official ordering table. -
Does the long case allow more than 0.563 inch of thread engagement?
No. The published limit is tied to the 3/8-24 thread, not the overall case length. Engagement beyond 0.563 inch can bind and requires consultation with the manufacturer. -
Can this order be used with a nine-metre Proximitor sensor?
Only as part of a correctly specified nine-metre electrical system, including the required extension cable. The one-metre probe length alone does not match a nine-metre sensor or remove the need to check component configuration. -
What is the recommended radial vibration gap?
For the documented complete 3300 XL system, the recommended radial vibration gap is -9 Vdc, approximately 1.27 mm. Confirm the target and all stated system conditions before applying this setting; it is not a standalone probe output. -
Does the cable jacket identify an extended-temperature probe?
No. Standard probe cable and its armor jacket use FEP in the cited construction. Extended-temperature probe designs have separate specifications; this 330102 code must not be given their higher temperature ratings. -
Can the probe be used on any shaft diameter?
No. The datasheet gives a 50.8 mm minimum shaft diameter and recommends at least 76.2 mm. Smaller-than-recommended diameters can alter scale factor, so actual shaft geometry must be assessed. -
Has an official direct successor been identified for this exact order?
No exact-model successor or discontinuation date was confirmed in the reviewed manufacturer sources. Select a replacement only after checking the entire order code, installed system and applicable manufacturer guidance.
READY TO VERIFY YOUR PART?
Get a 330102-00-70-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
