AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330101-00-39-10-02-05
In Stock
Ships by Sunday, August 16
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330101-00-39-10-02-05
-
Product Model330101-00-39-10-02-05
-
Product Parameters3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.5x1.3x113cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option3.9 in
-
Total Length Option1.0 meter (3.3 feet)
-
Connector and Cable-Type OptionMiniature coaxial ClickLocconnector, standard cable
-
Agency Approval OptionCSA, ATEX, IECEx Approvals
Description
The Bently Nevada 330101-00-39-10-02-05 features a 3/8-24 UNF threaded stainless-steel housing with a 3.9-inch overall case length and 0-inch unthreaded length, making it suitable for installations requiring an extended probe body while maintaining standard mounting dimensions.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Information
Overview
Manuals
Application Notes
Product Applications
Mechanical Insertion
Features:
- 3/8-24 UNF Thread Configuration
- Without Armor Construction
- Connector Protector with Standard Cable
- Patented TipLoc Molding Method
The cable terminates in a miniature coaxial ClickLoc connector with standard cable construction. Agency approvals include CSA, ATEX, and IECEx certifications for hazardous area installations.The 3.9-inch case length provides extensive thread engagement for mounting in very thick bearing housings, heavy machine casings, or applications requiring deep probe insertion through multiple structural layers. The 1.0-meter total length suits installations where the Proximitor sensor mounts in close proximity to the probe location.
The 330101-00-39-10-02-05 Bently Nevada 3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-39-10-02-05 3300 XL 8 mm Probe, 3/8-24 UNFthread, without armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Bently Nevada 330101-00-39-10-02-05 is factory calibrated for use with AISI 4140 steel targets and provides a 2.0 mm (80 mil) linear measurement range when used with the specified extension cable and Proximitor Sensor. The probe incorporates a PPS sensing tip, 75 Ω coaxial cable, and a Viton® sealing O-ring to provide stable measurement performance over an operating temperature range of -52°C to +177°C.
The Bently Nevada 330101-00-39-10-02-05 carries CSA, ATEX, and IECEx hazardous-area approvals, allowing installation in certified industrial environments. It is widely applied in steam turbines, gas turbines, compressors, pumps, generators, electric motors, and other critical rotating equipment used in power generation, oil and gas, petrochemical, mining, and process industries. Its extended 3.9-inch probe body, reliable measurement performance, and compatibility with the 3300 XL 8 mm Proximity Transducer System make it a dependable replacement probe for machinery protection and condition monitoring systems.
- Oil and Gas: Covers upstream extraction, midstream compression, and downstream refining
- Power Generation: Steam, gas, and hydro turbine-generators
- Petrochemical: Large pumps, centrifugal compressors, and electric motors
- Radial Vibration: Monitors dynamic shaft motion in fluid-film journal bearings
- Axial Position (Thrust): Tracks axial shaft displacement to prevent internal rubbing
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Thread Alignment: Screw the 3/8-24 UNF probe body carefully into the mounting hole or bracket without forcing the threads.
Clearance Gap: Position the probe tip so it does not touch the rotating target surface (standard calibration is for AISI 4140 steel).
Target Spacing: Set the initial physical gap to achieve a nominal -10 VDC to -12 VDC (or roughly a 1.27 mm / 50 mil gap for radial vibration) using a digital multimeter.
Lockdown: Tighten the locknut firmly once the correct gap voltage is reached to prevent shifting during machine operation.
Alternative Names
330101-00-39-10-02-O5
330101-00-39-10-0Z-05
330101-00-39-10-O2-05
330101-00-39-1O-02-05
330101-00-39-I0-02-05
330101-OO-39-10-02-05
33010I-00-39-10-02-05
3301O1-00-39-10-02-05
330I01-00-39-10-02-05
33O101-00-39-10-02-05
330101-00-39-10-02-00
330101-00-39-10-02-CN
330101-00-39-10-02-BR
330101-00-39-10-02-RU
Technical notes
The probe is suitable for use in classified locations when installed per Bently Nevada drawing 141092 (intrinsic safety) or drawing 140979 (non-incendive/encapsulated). Temperature classifications are available from T1 through T5 depending on ambient conditions. The standard cable operates from –51°C to +177°C.
FAQs
-
What target material is this probe calibrated for?
+By default, the 3300 XL Proximitor system is factory-calibrated to AISI 4140 steel. If your rotating machine shaft or target material is made of a different conductive metal or alloy, you must request a custom calibration from Bently Nevada to preserve measurement accuracy. -
How should this proximity probe be properly grounded?
+The probe case is inherently grounded through its mechanical mounting bracket. During installation, verify that the bracket forms a low-impedance electrical path straight to the machine frame to prevent static and EMI signal distortion. -
What happens if I mix 3300 XL probes with older, non-XL system components?
+The 3300 XL 8mm components are fully backwards-compatible and interchangeable with non-XL Bently Nevada 5mm and 8mm components. However, if you mix older components with this XL probe, the overall system measurement performance and thermal stability will be down-rated to the older non-XL system limits -
What is the pull strength rating of this cable assembly?
+The probe features a patented CableLoc design that provides up to 330 N (75 lbf) of tensile pull strength between the stainless steel probe case and the probe lead wire to prevent damage during routing or high-vibration operations.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
330101-XX-XX-20-02-05 MOD:147773-00-123300 XL 8 mm Proximity ProbesManufacturer: Bently NevadaView Details
-
-
-
Product
Product Browsing History
-
330101-00-39-10-02-053300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
-
330101-00-16-10-11-053300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
-
330104-00-09-10-01-003300 XL 8 mm Probe, M10 x 1 thread,with armorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
