PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330104-03-12-10-02-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Armored metric proximity probe
The armored Bently Nevada 330104-03-12-10-02-00 is a 3300 XL 8 mm sensing probe, not a standalone transmitter. Its metric construction includes a 120 mm case, 30 mm unthreaded section and 1 meter standard lead terminated by ClickLoc.
The connector is ordered without a protector. Flexible armor protects the lead, but does not replace correct cable support or connection protection. Check target conditions, total electrical length and the receiving monitor before configuring shaft vibration, position or rotational reference measurements.
The connector is ordered without a protector. Flexible armor protects the lead, but does not replace correct cable support or connection protection. Check target conditions, total electrical length and the receiving monitor before configuring shaft vibration, position or rotational reference measurements.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Documented proximity measurement applications
These distinct functions come from the manufacturer series documentation; they do not claim that the exact order was installed in a particular customer project.
-
01 · SHAFT VIBRATION
Armored shaft vibration sensing
The matched 3300 XL 8 mm system measures dynamic shaft movement on fluid-film bearing machinery. This order brings a 120 mm case and 1 meter standard lead to that measurement chain; mounting and target conditions must suit the actual machine. -
02 · POSITION MEASUREMENT
Metric probe position channels
The compatible system also measures static distance to a conductive surface. Check the 30 mm unthreaded section, M10 x 1 mounting thread and required clearance before locating this probe for a position measurement. These are series roles, not a claimed named-project installation. -
03 · ROTATIONAL REFERENCE
Keyphasor and speed reference sensing
Use the documented series with a suitable rotating target and receiving monitor for reference or speed measurements. Match the 1 meter probe configuration and review the manufacturer application note before selecting it for tachometer or overspeed applications.
Technical specifications for 330104-03-12-10-02-00
-
Product Model330104-03-12-10-02-00
-
Product ParametersArmored metric proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting threadM10 x 1
-
Unthreaded length30 mm
-
Overall case length120 mm
-
Nominal total probe length1 m
-
Lead protectionStainless steel armor; FEP jacket
-
Connector and cableClickLoc; standard; no protector
-
Agency approval option00: not required
-
Probe tip diameter8.0 mm
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Nominal probe DC resistance7.59 ohms, +/-0.50; center to outer
View all additional
Alternative Names
330104 03 12 10 02 00
330104-03-12-10-02-00 M10 x 1 probe
330104-03-12-10-02-00 standard armored proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ARMORED METRIC PROXIMITY PROBE
Integrating 330104-03-12-10-02-00
The armored Bently Nevada 330104-03-12-10-02-00 is a 3300 XL 8 mm sensing probe, not a standalone transmitter. Its metric construction includes a 120 mm case, 30 mm unthreaded section and 1 meter standard lead terminated by ClickLoc.
The connector is ordered without a protector. Flexible armor protects the lead, but does not replace correct cable support or connection protection. Check target conditions, total electrical length and the receiving monitor before configuring shaft vibration, position or rotational reference measurements.
For 330104-03-12-10-02-00, respect the 15 mm thread engagement limit and the selected 1 meter electrical length. Check the ClickLoc connection without a protector and the supplied component identity before applying power to the complete measurement chain.
Features:
- Verify mechanical and target conditions
- Match documented component lengths
- Protect connections during installation
The 330104-03-12-10-02-00 armored metric proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare 330104-03-12-10-02-00 with the installed complete order: 120 mm case, 30 mm unthreaded section, 1 meter standard lead, armored construction and connector without a protector. The same base family alone does not establish an exact replacement.
Specified XL and non-XL 3300 five and eight millimeter components can be interchangeable, but a mixed system is limited to the non-XL performance specification. Confirm the entire chain and mounting arrangement rather than substituting on appearance.
The reviewed official datasheet does not establish an exact-order discontinuation date, hardware revision or designated successor. Publication revision AM is not a hardware revision. No unsupported lifecycle or replacement designation is added.
Features:
- Compare full order before replacement
- Check documented system interchangeability
- Do not infer hardware revisions
The 330104-03-12-10-02-00 armored metric proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330104-03-12-10-02-00 armored metric proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2x1.5x59cm
-
Shipping weight0.08 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330104-03-12-10-02-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 330104-03-12-10-02-00 identify?
This is a Bently Nevada 3300 XL 8 mm armored metric proximity probe. For this metric order, 03 selects 30 mm of unthreaded length and 12 selects a 120 mm overall case. The table uses 10 mm increments; these two fields do not describe the integral lead. -
What signal does a system using 330104-03-12-10-02-00 provide?
The complete 3300 XL 8 mm system provides a voltage proportional to the distance between the probe tip and a conductive target. This supports position and vibration measurement; the probe alone is not a current-loop transmitter. -
How should the 1 meter standard probe be matched to a sensor?
Choose the documented total electrical length of the probe, any extension cable and Proximitor. The manufacturer also describes a one meter probe-only system; five and nine meter chains use the appropriate extension cable. -
Can 330104-03-12-10-02-00 be considered for fluid-film bearing machines?
Yes, this is a primary application identified for the 3300 XL 8 mm system. Verify the exact probe mounting, conductive target and total electrical length before selection. A general series application does not establish suitability for every individual machine. -
What installation limit applies to the M10 x 1 thread?
The published maximum thread engagement is 15 mm, assuming a matching internal thread fit. Extra case length does not permit unlimited engagement; exceeding the limit can cause binding. Compare the actual mounting drawing before installation. -
Does cable option 02 include a connector protector?
Option 02 specifies standard cable and the miniature coaxial ClickLoc connector without a protector. The manufacturer recommends connector protectors for increased environmental protection. -
Which probe resistance should be checked before commissioning?
The official nominal probe DC resistance is 7.59 ohms, +/-0.50; center to outer. This applies to the integral probe conductors, not the separately tabulated extension cable. Identify the component before comparing a measured reading. -
What target material is used for the published accuracy?
The specified accuracy and interchangeability are based on an AISI 4140 steel target under the stated operating conditions. Do not assume another target material has the same calibration or published performance.
READY TO VERIFY YOUR PART?
Get a 330104-03-12-10-02-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
