PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximity transducer extension cable
Bently Nevada 330130-070-00-CN is a proximity extension cable. The extension cable connects a compatible proximity probe to its Proximitor Sensor. Its length forms part of the calibrated measuring chain, so selection must account for the probe lead and sensor calibration rather than only the physical cable route.
The extension cable length is 7 m. Standard cable is selected. Match these selections to the compatible probe and Proximitor Sensor before installation. The extension length alone does not define the total system length, and unresolved order fields must not be treated as standard options.
The extension cable length is 7 m. Standard cable is selected. Match these selections to the compatible probe and Proximitor Sensor before installation. The extension length alone does not define the total system length, and unresolved order fields must not be treated as standard options.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 8 mm proximity transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · SHAFT VIBRATION
Bearing vibration sensing connections
The cable connects the shaft probe to its signal conditioner in a fluid-film-bearing vibration channel. The selected probe lead and extension must form the correct calibrated system length. -
02 · POSITION MONITORING
Static-position sensing chains
A matched probe and extension cable connect a conductive-target measurement to the Proximitor Sensor. Cable selection preserves the electrical configuration used by the position-monitoring channel. -
03 · PHASE REFERENCE
Keyphasor channel cabling
The manufacturer identifies phase-reference measurement as a system application. The extension belongs between the compatible probe and Proximitor Sensor, not between the sensor output and the monitor.
Technical specifications for 330130-070-00-CN
-
Product Model330130-070-00-CN
-
Product ParametersProximity transducer extension cable
-
In stock6 units
-
ManufacturerBently Nevada
-
Extension cable length7 m
-
Cable optionStandard cable
-
Cable construction75 ohm triaxial
-
Cable insulationFEP
-
Cable operating and storage range-52 to +177 deg C
-
Minimum bend radius25.4 mm
-
Connector materialGold-plated brass or beryllium copper
-
Connector maximum torque0.565 N m
-
XL connector engagementFinger-tight ClickLoc connection
-
Typical cable capacitance69.9 pF/m
View all additional
Alternative Names
330130-070-00-CN proximity extension cable
3300 XL 8 mm proximity transducer system 330130-070-00-CN
Bently Nevada 330130 070 00 CN
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITY TRANSDUCER EXTENSION CABLE
Integrating 330130-070-00-CN
The extension cable connects a compatible proximity probe to its Proximitor Sensor. Its length forms part of the calibrated measuring chain, so selection must account for the probe lead and sensor calibration rather than only the physical cable route.
Use this cable with the documented 3300 XL 8 mm or compatible 3300 5 mm chain and correct Proximitor Sensor calibration. Mixed XL/non-XL configurations are limited to non-XL performance. A one-metre system uses a one-metre probe without an extension cable.
Observe the 25.4 mm minimum bend radius and protect the connector from contamination. Two XL ClickLoc connectors engage finger-tight; mixed non-XL connections have different instructions. Do not shorten the sensing cable or substitute general-purpose field wiring to change the calibrated electrical length.
Features:
- Match complete ordering options, electrical length, mounting and the installed measuring chain
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330130-070-00-CN proximity extension cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330130-070-00-CN requires comparing complete ordering options, electrical length, mounting and the installed measuring chain. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use this cable with the documented 3300 XL 8 mm or compatible 3300 5 mm chain and correct Proximitor Sensor calibration. Mixed XL/non-XL configurations are limited to non-XL performance. A one-metre system uses a one-metre probe without an extension cable.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330130-070-00-CN proximity extension cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330130-070-00-CN proximity extension cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size19.3x18.6x2.1cm
-
Shipping weight0.24 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544200000
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330130-070-00-CN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 330130-070-00-CN identified?
330130-070-00-CN is a proximity extension cable. The extension cable length is 7 m. Standard cable is selected. Match these selections to the compatible probe and Proximitor Sensor before installation. The extension length alone does not define the total system length, and unresolved order fields must not be treated as standard options. -
What is the function of this proximity extension cable?
The extension cable connects a compatible proximity probe to its Proximitor Sensor. Its length forms part of the calibrated measuring chain, so selection must account for the probe lead and sensor calibration rather than only the physical cable route. -
Which components are compatible with 330130-070-00-CN?
Use this cable with the documented 3300 XL 8 mm or compatible 3300 5 mm chain and correct Proximitor Sensor calibration. Mixed XL/non-XL configurations are limited to non-XL performance. A one-metre system uses a one-metre probe without an extension cable. -
Where is this product family used?
A matched probe and extension cable connect a conductive-target measurement to the Proximitor Sensor. Cable selection preserves the electrical configuration used by the position-monitoring channel. -
What bend radius and connector precautions apply to this cable?
Observe the 25.4 mm minimum bend radius and protect the connector from contamination. Two XL ClickLoc connectors engage finger-tight; mixed non-XL connections have different instructions. Do not shorten the sensing cable or substitute general-purpose field wiring to change the calibrated electrical length. -
Does 7 m describe the complete calibrated system?
No. The extension cable length is only one part of the sensing chain. Add the matching probe lead and select the corresponding Proximitor Sensor calibration. Do not shorten the cable to make an unmatched electrical length fit. -
Can a one-metre 3300 XL system use an extension cable?
No. The documented one-metre 3300 XL 8 mm configuration uses a one-metre probe without an extension cable. A different complete system length requires its own matched probe, cable and sensor combination.
READY TO VERIFY YOUR PART?
Get a 330130-070-00-CN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
