AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330180-12-05
-
Product Model330180-12-05
-
Product Parameters3300 XL Proximitor Sensor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size7.8x2.8x6cm
-
ManufacturerBently Nevada
-
Weight0.2 kg
-
Operating Temperature-52°C to +100°C (-62°F to+212°F)
-
Storage Temperature-52°C to +105°C (-62°F to+221°F)
-
Total Length and Mounting Option1.0 meter (3.3 feet)
-
Agency Approval OptionCSA, ATEX, IECEx Approvals
-
Output Resistance50 Ω
-
Probe CaseMaterialAISI 303 or 304 stainless steel(SST)
Description
12 1.0 meter (3.3 feet) system length
nomounting hardware
05 CSA, ATEX, IECEx Approvals
3300 XL Proximitor Sensor
nomounting hardware
05 CSA, ATEX, IECEx Approvals
3300 XL Proximitor Sensor
Information
Overview
Manuals
Technical notes
Product Applications
Comparison with Related Models
Features:
- Ideal for Compression Systems, Speed Measurements, and Fluid-Film Bearing Machines
- Extended Temperature Range Applications
- Complete Interchangeability of Units and Cabling
- Backwards Compatible with Other Non-3300 XL Series Transducer System Components
The 330180-12-05 Bently Nevada 3300 XL Proximitor Sensor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330180-12-05 3300 XL Proximitor Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Bently Nevada 330180-12-05 is a 3300 XL Proximitor Sensor for non-contacting vibration and position measurement on rotating machinery. It is part of the 3300 XL 8 mm Proximity Transducer System and operates using eddy current technology, offering high accuracy and immunity to radio frequency interference.Compatible with all 5 mm and 8 mm 3300-series probes and extension cables.
- Gas and Steam Turbines: Used to monitor thrust position, vibration, and differential expansion
- Centrifugal and Axial Compressors: Essential for monitoring axial (thrust) position and radial vibration
- Electric Motors and Generators: Used for shaft vibration and position measurements
- Pumps and Gearboxes: Often used in high-speed or critical service units to detect early signs of mechanical failure
- Power Generation: Ensures operational stability and efficiency in generators and large turbines.
- Marine Propulsion: Utilized in monitoring propulsion systems and key marine engine components.
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
The primary difference between the 330180-12-05 and the 330180-12-00 is the Agency Approval certification. While both sensors share identical mechanical and electrical performance specifications, the -05 model is certified for use in hazardous areas, whereas the -00 model is not.
Use the 330180-12-05 if your machinery is located in an environment where explosive gases or dust may be present. It is the safer choice for refineries, chemical plants, and offshore platforms.
Use the 330180-12-00 for standard indoor applications where hazardous area certification is not a regulatory requirement, often resulting in lower costs or faster availability.
FAQs
-
What is 330180-12-05?+The Bently Nevada 330180-12-05 is a 3300 XL Proximitor Sensor for precise vibration and position measurement in industrial machinery.
-
What is the function of the 330180-12-05?+It is a Proximitor Sensor used to measure vibration and position in fluid-film bearing machines, speed, and compression systems.
-
What do the 330180-12-05 suffix numbers mean?+The "-12" indicates a 1.0-meter (3.3 feet) total system length with no mounting hardware, and the "-05" indicates agency approvals (CSA, ATEX, IECEx).
-
Is it compatible with older systems?+Yes, it is backward-compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components.
-
What are the environmental features?+The sensor provides high immunity to radio frequency interference (RFI/EMI), allowing it to be mounted in high-density DIN-rail installations or fiberglass housings.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN