PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximity connector protector kit
Bently Nevada 40113-02 is a connector protector package. The accessory provides environmental protection at the documented probe and extension-cable connection. It does not change the calibrated electrical length or turn an unapproved installation into a certified system. Select the protector family and installation arrangement for the actual connector.
The manufacturer lists 40113-02 for 3300 XL 8 mm probe and extension-cable connections. The kit includes connector protectors and installation tools; it is not simply an unverified package of loose connectors. Match the installed connector arrangement before replacement.
The manufacturer lists 40113-02 for 3300 XL 8 mm probe and extension-cable connections. The kit includes connector protectors and installation tools; it is not simply an unverified package of loose connectors. Match the installed connector arrangement before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 8 mm transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · PROBE CONNECTIONS
Protected sensing-chain junctions
The documented accessory serves 3300 XL 8 mm probe and extension-cable connections. Its role is at the sensing-chain junction, not the monitor field-terminal connection. -
02 · SERVICE WORK
Matching connection components
The listed package supports replacement work on the intended connection. Check its contents against the specific service task instead of treating connector parts and protector tools as the same product. -
03 · MEASUREMENT CONTINUITY
Maintaining the correct sensing chain
The connected probe, cable and Proximitor Sensor remain a calibrated combination. Connection maintenance must preserve that selection; the accessory alone neither measures vibration nor establishes system accuracy.
Technical specifications for 40113-02
-
Product Model40113-02
-
Product ParametersProximity connector protector kit
-
In stock4 units
-
ManufacturerBently Nevada
-
Intended sensing family3300 XL 8 mm
-
Protected connectionProbe-to-extension cable connectors
-
Package selectionConnector protectors with installation tools
View all additional
Alternative Names
40113 02
40113-02 connector protector package
Bently Nevada 40113-02
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITY CONNECTOR PROTECTOR KIT
Integrating 40113-02
The accessory provides environmental protection at the documented probe and extension-cable connection. It does not change the calibrated electrical length or turn an unapproved installation into a certified system. Select the protector family and installation arrangement for the actual connector.
Use the accessory with the documented 3300 XL 8 mm probes and extension cables. Do not transfer the protector or connector selection from a different probe family merely because its main system name includes 3300 XL.
Follow the applicable transducer-system manual for connector assembly and protection. Keep the connection clean and preserve the selected calibrated probe/cable length. A connection accessory does not authorize shortening the sensing cable or substituting generic field wiring.
Features:
- Match exact spare identity, complete installed system and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 40113-02 connector protector package requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 40113-02 requires comparing exact spare identity, complete installed system and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the accessory with the documented 3300 XL 8 mm probes and extension cables. Do not transfer the protector or connector selection from a different probe family merely because its main system name includes 3300 XL.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 40113-02 connector protector package requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 40113-02 connector protector package must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size21.5x20x9cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 40113-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 40113-02 identify?
The manufacturer lists 40113-02 for 3300 XL 8 mm probe and extension-cable connections. The kit includes connector protectors and installation tools; it is not simply an unverified package of loose connectors. Match the installed connector arrangement before replacement. -
What is the function of this component?
The accessory provides environmental protection at the documented probe and extension-cable connection. It does not change the calibrated electrical length or turn an unapproved installation into a certified system. Select the protector family and installation arrangement for the actual connector. -
Which equipment is compatible?
Use the accessory with the documented 3300 XL 8 mm probes and extension cables. Do not transfer the protector or connector selection from a different probe family merely because its main system name includes 3300 XL. -
Where is this component used?
The documented accessory serves 3300 XL 8 mm probe and extension-cable connections. Its role is at the sensing-chain junction, not the monitor field-terminal connection. -
What matters during installation?
Follow the applicable transducer-system manual for connector assembly and protection. Keep the connection clean and preserve the selected calibrated probe/cable length. A connection accessory does not authorize shortening the sensing cable or substituting generic field wiring. -
Does the accessory include a complete proximity probe?
No. The parts list identifies connection accessories, not a complete probe or Proximitor Sensor. Select those measuring components separately using their full ordering codes. -
Does this accessory establish a hazardous-area approval?
No. The accessory listing does not replace the complete transducer-system approval, delivered markings or applicable installation drawing. Environmental connection protection and hazardous-area certification are different requirements.
READY TO VERIFY YOUR PART?
Get a 40113-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
