PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 330380-90-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
High temperature proximity conditioner
Bently Nevada 330380-90-00 is a HTPS signal conditioner. The Proximitor conditions the matched high-temperature probe and extension cable for vibration and position monitoring. It supports a nine-metre sensing chain. The electronics and hot-end probe have different temperature limits; the sensor must remain within its own operating temperature range.
This order selects a nine-metre system with panel mounting and no requested agency approval. Use the matching sixteen-millimetre high-temperature probe and extension cable. A similar connector or the same total cable length does not establish compatibility with a different proximity-sensor family.
This order selects a nine-metre system with panel mounting and no requested agency approval. Use the matching sixteen-millimetre high-temperature probe and extension cable. A similar connector or the same total cable length does not establish compatibility with a different proximity-sensor family.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 16 mm HTPS
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · HOT BEARING LOCATIONS
Conditioning the remote probe measurement
The high-temperature system can measure vibration where conventional probes would be damaged by heat. This Proximitor receives the matched probe/cable signal while remaining within the electronics temperature limit. -
02 · STEAM TURBINE EXPANSION
Supporting the differential-expansion channel
The manufacturer lists steam-turbine differential expansion among HTPS applications. The sensor conditions the selected probe measurement; target geometry, system calibration and the configured monitoring channel determine suitability. -
03 · ROTOR DIAGNOSTICS
Providing mid-span proximity measurements
The system is documented for turbine mid-span mode-shape analysis, including diagnostic work on rotor behavior. Match the probe installation and monitor scale before using the conditioned signal for that analysis; it is a family application, not proof of an exact-order installation.
Technical specifications for 330380-90-00
-
Product Model330380-90-00
-
Product ParametersHigh temperature proximity conditioner
-
In stock9 units
-
ManufacturerBently Nevada
-
Matched inputOne 3300 XL HTPS 16 mm probe with matched extension cable
-
Calibrated system length9 m
-
Selected mountingPanel mount
-
Agency approval option00: not required
-
Power supply range-19.6 to -26 Vdc; range may reduce above -23.5 Vdc
-
Maximum supply current12 mA
-
Supply sensitivityLess than 13 mV output change per volt supply change
-
Output resistance50 ohms
-
Maximum field-wiring length305 m from Proximitor Sensor to monitor; frequency rolloff applies
-
Sensor enclosure materialAluminum with epoxy powder-coat finish
-
Sensor operating temperature-52 to +100 deg C
-
Sensor storage temperature-52 to +105 deg C
-
Sensor humidity condition100% condensing, non-submerged, with connectors protected
-
Nominal matched-system scale factor3.94 V/mm (100 mV/mil), subject to specified target and calibration conditions
-
Typical matched-system response0 to 6 kHz, +0/-3 dB, with up to 305 m field wiring
View all additional
Alternative Names
330380 90 00
330380-90-00 HTPS signal conditioner
Bently Nevada 330380-90-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
HIGH TEMPERATURE PROXIMITY CONDITIONER
Integrating 330380-90-00
The Proximitor conditions the matched high-temperature probe and extension cable for vibration and position monitoring. It supports a nine-metre sensing chain. The electronics and hot-end probe have different temperature limits; the sensor must remain within its own operating temperature range.
The manufacturer identifies 330380 as replacing 330300. Confirm the complete HTPS configuration, selected mounting, monitor scale and supplied probe/cable pairing before substitution. The extension cable is matched to the probe; a replacement cable requires its probe serial number for capacitance matching.
Install the Proximitor within its own -52 to +100 deg C operating range and use the specified negative DC supply. Follow User Guide 125M6030, the target-gap requirements and the sensor-to-monitor wiring limitations. The +350 deg C probe rating is not an electronics operating rating.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330380-90-00 HTPS signal conditioner requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330380-90-00 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The manufacturer identifies 330380 as replacing 330300. Confirm the complete HTPS configuration, selected mounting, monitor scale and supplied probe/cable pairing before substitution. The extension cable is matched to the probe; a replacement cable requires its probe serial number for capacitance matching.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330380-90-00 HTPS signal conditioner requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330380-90-00 HTPS signal conditioner must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8.8x3.5x7cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330380-90-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 330380-90-00 identified?
This order selects a nine-metre system with panel mounting and no requested agency approval. Use the matching sixteen-millimetre high-temperature probe and extension cable. A similar connector or the same total cable length does not establish compatibility with a different proximity-sensor family. -
What is the function of this component?
The Proximitor conditions the matched high-temperature probe and extension cable for vibration and position monitoring. It supports a nine-metre sensing chain. The electronics and hot-end probe have different temperature limits; the sensor must remain within its own operating temperature range. -
Which equipment and settings must match?
The manufacturer identifies 330380 as replacing 330300. Confirm the complete HTPS configuration, selected mounting, monitor scale and supplied probe/cable pairing before substitution. The extension cable is matched to the probe; a replacement cable requires its probe serial number for capacitance matching. -
What application does it support?
The high-temperature system can measure vibration where conventional probes would be damaged by heat. This Proximitor receives the matched probe/cable signal while remaining within the electronics temperature limit. -
What should be checked during installation?
Install the Proximitor within its own -52 to +100 deg C operating range and use the specified negative DC supply. Follow User Guide 125M6030, the target-gap requirements and the sensor-to-monitor wiring limitations. The +350 deg C probe rating is not an electronics operating rating. -
Can the Proximitor electronics operate at the probe rating of 350 deg C?
No. The source gives the Proximitor an operating range of -52 to +100 deg C. The much higher temperature rating belongs to the probe and integral hardline cable, not the signal-conditioning electronics. -
Can any extension cable of the right length be substituted?
No. The manufacturer states that the HTPS extension cable is matched to the probe. Ordering a replacement requires the probe serial number so the cable can be matched to the original capacitance. -
Will a less negative supply preserve the complete linear range?
Not necessarily. Although the specified supply range extends to -19.6 Vdc, the manufacturer warns that operation more positive than -23.5 Vdc can reduce the linear range. Check the voltage at the sensor under operating conditions.
READY TO VERIFY YOUR PART?
Get a 330380-90-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
