PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 330901-00-55-05-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NSv proximity measurement for restricted clearances and small targets
Bently Nevada 330901-00-55-05-02-05 is an unarmored 3300 NSv proximity probe for a matched 3300 XL NSv transducer system. It combines a 1/4-28 UNF case with zero unthreaded length, a 5.5-inch overall case and a 0.5 m total probe length.
The standard FEP-insulated cable ends in a miniature coaxial ClickLoc connector without a protector. The final approval option is 05; verify the supplied markings, target clearance and complete 5 m or 7 m sensing chain before installation.
The standard FEP-insulated cable ends in a miniature coaxial ClickLoc connector without a protector. The final approval option is 05; verify the supplied markings, target clearance and complete 5 m or 7 m sensing chain before installation.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where the NSv probe supports small-target monitoring
Use this exact probe in a correctly matched NSv system; shaft size, target material and surrounding metal affect the measurement.
-
01 · SMALL SHAFTS
Radial vibration and position
Measure radial shaft vibration or position on fluid-film-bearing machines where small shafts or restricted sideview limit standard transducer installations. -
02 · THRUST POSITION
Axial movement on small targets
Observe axial thrust position with an NSv probe where the available flat target is smaller than that required by a standard 5 mm or 8 mm system. -
03 · SPEED & KEYPHASOR
Rotation and phase-reference signals
Provide tachometer, zero-speed or phase-reference signals on suitable machine targets when the sensor chain and monitoring channel are configured for the task.
Technical specifications for 330901-00-55-05-02-05
-
Product Model330901-00-55-05-02-05
-
Product ParametersUnarmored NSv proximity probe
-
In stock6 units
-
ManufacturerBently Nevada
-
Mounting Thread1/4-28 UNF-2A
-
Unthreaded Length0.0 inch
-
Overall Case Length5.5 inches
-
Total Probe Length0.5 metre
-
Cable ArmorWithout armor
-
Cable Construction75-ohm coaxial cable with FEP insulation
-
Connector PackageMiniature coaxial ClickLoc, no connector protector
-
Probe Tip MaterialPolyphenylene sulfide (PPS)
-
Probe Case MaterialAISI 304 stainless steel
-
Agency ApprovalMultiple approvals
View all additional
Alternative Names
330901-00-55-05-02-05
3300 XL NSv 0.5 m probe
1/4-28 unarmored NSv proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL NSv SYSTEM
Verify the complete NSv sensing chain
The 330901-00-55-05-02-05 probe operates as part of a 3300 XL NSv system with an NSv extension cable and Proximitor sensor. The system addresses restricted sideview and small-target installations on fluid-film-bearing machinery.
Select the extension cable so the complete electrical length equals the 5 m or 7 m rating of the NSv Proximitor sensor. This order supplies a 0.5 m probe; the remaining sensing-chain components must be identified separately.
Check target material, clearance, probe gap and mounting thread before commissioning. Protect the unarmored cable and ClickLoc connection from mechanical damage and fluid ingress; this connector option does not include a protector.
Features:
- Use a matching 5 m or 7 m NSv system
- Verify the 1/4-28 thread and target geometry
- Protect the unarmored cable and connector
The Bently Nevada 330901-00-55-05-02-05 NSv proximity probe requires the electrical length, mounting and target conditions to be confirmed before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the complete 330901-00-55-05-02-05 order with the installed probe. Case length, unthreaded length, total probe length, connector/cable selection and approval option are separate checks.
For the 1/4-28 probe, the documented maximum thread engagement is 0.375 inch. Observe the specified cable bend radius and installation torque; a long case is not permission to increase engagement.
NSv family documentation permits certain upgrades from 3300 RAM and 190-series systems, but the replacement scope differs. A 190-series upgrade requires NSv probe, extension cable and Proximitor components; verify the complete installed system before substitution.
Features:
- Match the full five-group option code
- Keep 1/4-28 engagement within the documented limit
- Recheck probe gap and monitoring response
The Bently Nevada 330901-00-55-05-02-05 NSv proximity probe requires replacement verification based on the order options, electrical length, mounting limits and target geometry before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- NSv datasheet and ordering references are confirmed before order
- Probe, cable and Proximitor system matching remains the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330901-00-55-05-02-05 NSv proximity probe must be matched to the complete ordering code and installed transducer system; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.1x1x70cm
-
Shipping weight0.05kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031.90
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330901-00-55-05-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are the two 05 fields interchangeable meanings?
No. The first 05 specifies a 0.5-metre total probe length. The final 05 is the agency approval selection; each occupies a different position in the ordering code. -
Which electrical system lengths are documented for the half-metre probe?
The NSv system uses five- or seven-metre total lengths. Select the extension cable so its length plus this 0.5-metre probe equals the Proximitor sensor length. -
Which target conditions justify selecting an NSv system?
The NSv family addresses restricted sideview clearance, shafts smaller than 51 mm and flat targets smaller than 15 mm. Confirm the actual target geometry and calibration conditions against the official NSv datasheet. -
Can the 5.5-inch case be fully threaded into its mounting hole?
No. For a 1/4-28 NSv probe, the maximum specified thread engagement is 0.375 inch. Exceeding the limit can cause binding. -
What cable construction is used in this NSv order?
The applicable standard NSv cable is 75-ohm coaxial cable with FEP insulation. It is not the 75-ohm triaxial cable used in the standard 3300 XL 8 mm probe family. -
What is the expected probe DC resistance for the 05 length option?
The official NSv table lists 4.0 +/- 0.5 ohm between the center and outer conductors for the half-metre probe. Do not use another length or family row as its acceptance reference. -
Can a 190-series upgrade retain every old sensing component?
No. The manufacturer states that a 3000-series or 7000-series 190 upgrade to NSv replaces the probe, extension cable and Proximitor sensor. This family guidance does not establish an unconditional exact-order substitution. -
Does the ClickLoc connector need protection in a wet installation?
The 02 connector option has no connector protector. Bently Nevada recommends connector protection against liquids; use the specified protector where turbine oil is present because silicone tape is not suitable for that exposure.
READY TO VERIFY YOUR PART?
Get a 330901-00-55-05-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
