PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 330901-00-70-10-02-05
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Unarmored NSv proximity probe
Bently Nevada 330901-00-70-10-02-05 is an unarmored 3300 NSv proximity probe with a seven inch case and a 1/4-28 UNF thread. It has no unthreaded section and uses a one meter standard cable with a miniature ClickLoc connector.
The NSv design serves measurement positions with limited side clearance or small conductive targets, including compressor shaft monitoring. Complete the channel with the correct NSv cable and sensor, verify probe spacing, and protect the connector junction. Approval option 05 remains subject to the actual installation conditions.
The NSv design serves measurement positions with limited side clearance or small conductive targets, including compressor shaft monitoring. Complete the channel with the correct NSv cable and sensor, verify probe spacing, and protect the connector junction. Approval option 05 remains subject to the actual installation conditions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
3300 XL NSv application roles
These are manufacturer-described applications of the compatible series. They do not assert installation of this exact order in a named customer project.
-
01 · Compressor monitoring
Radial shaft vibration
The NSv measuring chain supports radial vibration on fluid film bearing machines with limited side clearance or small shafts. Verify shaft diameter and the separation of adjacent probes before using the current component in that system. -
02 · Thrust measurement
Restricted target position monitoring
The manufacturer describes axial position measurements on small conductive targets. A matched NSv channel supplies the required gap signal, subject to the published target size, alignment and operating conditions. -
03 · Rotational sensing
Tachometer and phase reference
The NSv system supports tachometer, zero speed and phase reference measurements. The current component must be integrated with the documented probe, cable, sensor and monitor combination for that function.
Technical specifications for 330901-00-70-10-02-05
-
Product Model330901-00-70-10-02-05
-
Product ParametersUnarmored NSv proximity probe
-
ManufacturerBently Nevada
-
Mounting thread1/4-28 UNF
-
Lead protectionWithout armor
-
Overall case length7.0 in
-
Unthreaded length0.0 in
-
Total probe length1.0 m
-
Connector and cableClickLoc; standard cable; no protector
-
Approval order option05: multiple approvals; check markings
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 304 stainless steel
-
Probe cable construction75-ohm coaxial, FEP insulated
-
Operating / storage temperature-52 to +177 degrees C; pressure seal precautions apply
-
Minimum cable bend radius25.4 mm
View all additional
Alternative Names
330901 00 70 10 02 05
330901-00-70-10-02-05 proximity probe
3300 XL NSv proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
UNARMORED NSV PROXIMITY PROBE
Integrating 330901-00-70-10-02-05
Bently Nevada 330901-00-70-10-02-05 is an unarmored 3300 NSv proximity probe with a seven inch case and a 1/4-28 UNF thread. It has no unthreaded section and uses a one meter standard cable with a miniature ClickLoc connector.
The NSv design serves measurement positions with limited side clearance or small conductive targets, including compressor shaft monitoring. Complete the channel with the correct NSv cable and sensor, verify probe spacing, and protect the connector junction. Approval option 05 remains subject to the actual installation conditions.
For 330901-00-70-10-02-05, check the documented 3300 XL NSv configuration before connecting it to existing equipment. The selected order is 1/4-28 UNF; Without armor; 7.0 in. Published family performance applies only under the specified test and installation conditions.
Features:
- Verify the complete order and configuration
- Use the applicable manufacturer installation guidance
- Keep component and complete-system ratings separate
The 330901-00-70-10-02-05 proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the full 330901-00-70-10-02-05 identity with the installed assembly and manufacturer ordering information. Do not treat a different length, mounting arrangement, cable construction or approval option as an equivalent replacement merely because the product belongs to the same family.
The manufacturer documents compatibility between NSv and 3300 RAM probes and extension cables. A RAM upgrade may retain the specified probe and cable with an NSv sensor, whereas upgrading a 3000 or 7000 series 190 system requires a complete NSv sensing chain.
No exact-order hardware revision, discontinuation date or designated successor was established in the reviewed manufacturer materials. Document revision R identifies the publication, not the product hardware. Unverified lifecycle dates and replacement claims are not added.
Features:
- Match the full order before replacement
- Check system and installation conditions
- Do not infer a hardware revision from a document
The 330901-00-70-10-02-05 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330901-00-70-10-02-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330901-00-70-10-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which mounting geometry does 330901-00-70-10-02-05 require?
This order has a 1/4-28 UNF thread, 7.0 in case length and 0.0 in unthreaded length. Check the mounting drawing and applicable engagement limit; do not substitute a similar looking imperial or metric probe. -
What cable and connector are specified for this 1.0 m probe?
The order specifies clickloc; standard cable; no protector and 1.0 m total probe length. Select the extension cable so the complete electrical length matches the correct Proximitor Sensor; connector appearance alone is not a compatibility check. -
Can it replace a probe from another transducer system?
No automatic drop-in relationship is established. The manufacturer documents NSv and 3300 RAM probe/cable compatibility. An upgrade from 3000 or 7000 series 190 equipment requires a complete NSv sensing chain. -
How should the probe lead be routed?
Maintain the documented 25.4 mm minimum cable bend radius and avoid loading the connector or probe lead mechanically. This order has no armor; provide suitable routing protection for the installation. -
Does the approval suffix authorize every hazardous area installation?
No. This order selects 05: multiple approvals; check markings. Area classification, unit markings and the applicable controlled installation drawings must be checked separately. An order suffix does not establish all safe use conditions. -
Is the probe pressure tested before delivery?
The manufacturer states that these probes are not pressure tested before shipment. Pressure containment and process media compatibility must be assessed for the installation. Request the applicable manufacturer test or design review when a verified pressure seal is required.
READY TO VERIFY YOUR PART?
Get a 330901-00-70-10-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
