AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 330902-00-90-10-01-05
In Stock
Ships by Sunday, August 16
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330902-00-90-10-01-05
-
Product Model330902-00-90-10-01-05
-
Product Parameters3300 NSv Probe, 1/4-28 UNF thread,with armor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.5x1.3x113cm
-
ManufacturerBently Nevada
-
Weight0.1 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option9.0 in
-
Total Length Option1.0 meter (39 in)
-
Connector and Cable-Type OptionMiniature coaxial ClickLoc connectorwith connector protector, standardcable
-
Agency Approval OptionMultiple Approvals
Description
The BENTLY NEVADA 330902-00-90-10-01-05 3300 NSv Proximity Probe is a non-contact eddy-current proximity probe designed for use within the 3300 XL NSv Proximity Transducer System. The probe detects changes in the distance between its sensing tip and a conductive machine target, such as a rotating shaft, allowing the complete transducer system to measure shaft vibration and displacement.
The 330902 model is the standard-mount 3300 NSv Probe with a 1/4-28 UNF-2A thread and armor. The armored construction provides additional mechanical protection for the probe cable in industrial environments where the cable may be exposed to vibration, abrasion, or other mechanical stresses.
The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in).
The 330902 model is the standard-mount 3300 NSv Probe with a 1/4-28 UNF-2A thread and armor. The armored construction provides additional mechanical protection for the probe cable in industrial environments where the cable may be exposed to vibration, abrasion, or other mechanical stresses.
The primary uses for the 3300 XL NSv Transducer System arefor areas where counter bore, sideview, or rearviewrestrictions limit the use of standard Bently Nevada 3300 and3300 XL 5 and 8 mm Transducer Systems. It is also ideal forsmall target applications, such as measuring radial vibrationon shafts smaller than 51 mm (2 in) or axial position on flattargets smaller than 15 mm (0.6 in).
Information
Overview
Manuals
Application Notes
Product Applications
Probe Insertion & Gap Setup
Features:
- 1/4-28 UNF Thread with Armor Protection
- 9.0 Inch (228.6 mm) Overall Case Length
- 1.0 Meter (3.3 Feet) Total Cable Length
- Enhanced Side-View Characteristics
- Increased Chemical Resistance
The 330902-00-90-10-01-05 has an Average Scale Factor of 7.87 V/mm (200 mV/mil), which is the most common output for eddy current transducers. The 330902-00-90-10-01-05 has enhanced side-view and small target characteristics that give it a shorter linear range than the Bently Nevada 3300XL-series 5 and 8mm Transducer System. The 1.5 mm (60 mils) of linear range of the 330902-00-90-10-01-05 exceeds the linear range of the 3000-series 190 Transducer System.
The 330902-00-90-10-01-05 BENTLY NEVADA 3300 NSv Probe, 1/4-28 UNF thread,with armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
BENTLY NEVADA 330902-00-90-10-01-05 3300 NSv Probe, 1/4-28 UNF thread,with armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The -00-90 configuration specifies a 0.0 in unthreaded length and a 9.0 in case length. This combination provides the specified mechanical geometry for installation in the intended machinery monitoring application. The unthreaded length and case length should be matched carefully when replacing an existing probe because these dimensions affect the installation position and mechanical fit.
The -10 option specifies a 1.0 m / 39 in total system length. The total system length is an important parameter in a 3300 XL NSv proximity transducer system because the probe, extension cable, and Proximitor Sensor must be selected as a compatible system. The correct total electrical length must be maintained to achieve the intended system performance.
The -01 connector option specifies a miniature coaxial ClickLoc connector with connector protector and standard cable. The ClickLoc connector provides the interface between the probe and the compatible extension cable. The connector protector helps provide additional mechanical protection at the connection point.
- Oil & Gas: Monitors vibration on compressors, pumps, and turbines
- Power Generation: Tracks seismic casing vibration on high-speed rotating equipment and fans
- Petrochemical/Chemical: Continuous monitoring in hazardous/corrosive environments with agency approvals
- Pulp/Paper/Water: General health assessments for gearboxes, pumps, and motors
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Mechanical Gap Setting: Thread the probe into the machine until it physically touches the target . Back off the probe by the required number of turns based on the thread pitch, or set a direct gap using a feeler gauge.
Electrical Zeroing: Connect the probe, extension cable, and Proximitor sensor. Turn on the system and use a digital voltmeter to check the output gap voltage.
Target Voltage: Adjust the probe's insertion depth until the gap voltage reads typically -9.0 VDC to -10.0 VDC (dependent on the specific calibration curve for your target).
Lockdown: Once the ideal voltage is reached, securely tighten the locknut against the machine casing to prevent vibration-induced movement.
Alternative Names
330902-00-90-10-01-O5
330902-00-90-10-0I-05
330902-00-90-10-O1-05
330902-00-90-IO-01-05
330902-00-9O-10-01-05
330902-OO-90-10-01-05
3309O2-00-90-10-01-05
33O902-00-90-10-01-05
330902 00 90 10 01 05
330902 00 90 10 01 O5
330902 00 90 10 0I 05
330902 00 90 10 O1 05
330902 00 90 IO 01 05
330902 00 9O 10 01 05
330902 OO 90 10 01 05
33090Z 00 90 10 01 05
3309O2 00 90 10 01 05
33O902 00 90 10 01 05
330902-00-90-10-01-00
330902-00-90-10-01-CN
330902-00-90-10-01-BR
Technical notes
The 330902-00-90-10-01-05 is suitable for industrial machinery condition monitoring and protection applications involving turbines, compressors, pumps, motors, gearboxes, and other rotating equipment. Its 1/4-28 UNF threaded mounting configuration and armored cable construction make it suitable for demanding industrial installations.
FAQs
-
What is the linear measurement range?
+The 3300 NSv system features a linear range of 1.5 mm (60 mils). This is shorter than the standard 3300 XL 8mm system but necessary for small target/side-view applications. -
Can I mix NSv probes with standard 3300 XL extension cables?
+No. You must use Bently Nevada NSv probes together with NSv extension cables and an NSv Proximitor sensor. Mixing standard parts with NSv components will cause calibration errors. -
What is the maximum operating temperature?
+The probe is designed to withstand temperatures ranging from -52°C to +177°C. -
What system components must match this probe?
+It must be connected to a matching 3300 NSv extension cable and a 3300 XL NSv Proximitor Sensor configured for a 5.0m or 7.0m total loop length.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
330908-10-55-05-02-003300 NSv Probe, 1/4-28 UNF thread,without armorManufacturer: Bently NevadaView Details -
330901-00-40-10-02-053300 NSv Probe, 1/4-28 UNF thread,without armorManufacturer: Bently NevadaView Details -
-
-
-
-
-
-
Product
Product Browsing History
-
330902-00-90-10-01-053300 NSv Probe, 1/4-28 UNF thread,with armorManufacturer: Bently NevadaView Details
-
330103-00-16-50-12-053300 XL 8 mm Probe, M10 x 1 thread,without armorManufacturer: Bently NevadaView Details
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
