PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 330903-00-11-10-01-CN
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL NSv standard-mount proximity probe, M8 x 1, without armor
Bently Nevada 330903-00-11-10-01-CN is an unarmored, metric 3300 NSv proximity probe for the 3300 XL NSv system. Its M8 x 1 mounting, 110 mm case and one-metre total length suit a separately verified narrow-sideview installation configuration.
The protected standard-cable termination connects within a matched NSv measurement chain for constrained machinery geometry. Keep the CN approval selection with the complete order, confirm the supplied certification markings, and verify shaft size, counterbore and probe spacing against the NSv guidance rather than standard 8 mm assumptions.
The protected standard-cable termination connects within a matched NSv measurement chain for constrained machinery geometry. Keep the CN approval selection with the complete order, confirm the supplied certification markings, and verify shaft size, counterbore and probe spacing against the NSv guidance rather than standard 8 mm assumptions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330903-00-11-10-01-CN
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · AIR COMPRESSORS
Shaft vibration in constrained compressor spaces
The NSv system is documented for centrifugal air compressors with tight installation requirements. This metric sensing probe can serve the radial-vibration channel when actual shaft size, sideview clearance and electrical system length are verified. -
02 · REFRIGERATION MACHINERY
Thrust position at a limited target area
For refrigeration-compressor monitoring, the family supports axial-position measurement where target area or mounting clearance restricts a standard probe installation. Assess target dimensions and operating gap using NSv requirements before selecting this M8 configuration. -
03 · PROCESS GAS COMPRESSION
Phase reference in compact bearing arrangements
The family provides phase-reference sensing for process gas compressors with constrained geometry. The complete NSv channel must be compatible, and the CN product markings and safe-use conditions must suit the actual installation.
Technical specifications for 330903-00-11-10-01-CN
-
Product Model330903-00-11-10-01-CN
-
Product ParametersUnarmored NSv proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting threadM8 x 1
-
Unthreaded length0 mm
-
Overall case length110 mm
-
Total probe length1.0 m
-
Cable armorUnarmored
-
Probe cable construction75-ohm coaxial cable with FEP insulation
-
Connector packageMiniature coaxial ClickLoc with connector protector
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 304 stainless steel
-
Probe temperature range-52 to +177 deg C; pressure-seal caveat below -34 deg C
-
Nominal probe DC resistance4.2 +/- 0.5 ohm, center to outer conductor
-
Probe case-to-lead tensile rating220 N maximum rated
-
Minimum cable bend radius25.4 mm
-
Approval ordering optionCN ordering option; verify applicable certificate and markings
View all additional
Alternative Names
330903-00-11-10-01-CN proximity probe
110 mm metric unarmored sensing probe
3300 XL NSv 1.0 m M8 probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL NSV
3300 XL NSv proximity measurement chain
The 330903-00-11-10-01-CN sensing assembly belongs to the 3300 XL NSv measurement chain, which is documented for restricted sideview and small-target applications. Its 110 mm case and M8 x 1 mounting must be assessed against the actual machine geometry, not another probe family's mounting assumptions.
The selected probe has 1.0 m total length. NSv channels use five- or seven-metre electrical lengths; any probe and extension-cable combination must equal the chosen NSv Proximitor length. Standard 3300 XL 8 mm system-length rules must not be substituted.
Respect the 12 mm thread-engagement limit and 25.4 mm minimum bend radius, and verify target size, probe spacing and counterbore clearance. Review the included protector and actual CN approval markings together with the other system connections.
Features:
- Use the documented NSv probe/cable/Proximitor chain
- 12 mm maximum specified engagement
- Small-target and probe-spacing limits remain important
The Bently Nevada 330903-00-11-10-01-CN Noncontact proximity sensing probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the M8 x 1 case, 1.0 m probe length, unarmored construction and complete 330903-00-11-10-01-CN order before approving a substitute. Similar NSv function does not establish identical mechanical mounting or connector protection.
The manufacturer states that NSv probes and extension cables are compatible with the previous 3300 RAM probe and cable. A documented RAM upgrade may retain those components with an NSv Proximitor, whereas migration from 3000-series or 7000-series 190 equipment requires replacing probe, cable and Proximitor.
These are family-level migration conditions, not an unconditional replacement declaration for this complete ordering code. No exact hardware revision, withdrawal date or nominated successor was confirmed; check the existing channel, target calibration and certification requirements before replacing components.
Features:
- Match NSv mechanical and electrical options
- RAM and 190 upgrades have different requirements
- No exact-order drop-in successor established
The Bently Nevada 330903-00-11-10-01-CN Noncontact proximity sensing probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330903-00-11-10-01-CN Noncontact proximity sensing probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330903-00-11-10-01-CN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the 11 field mean in this metric NSv order?
It specifies a 110 mm overall case in 10 mm increments. The following 10 is the one-metre total probe length; it does not describe a second metric case dimension. -
Is a one-metre NSv probe a complete one-metre measurement system?
No. The NSv datasheet specifies five- or seven-metre systems. Probe and extension-cable lengths must add to the selected NSv Proximitor sensor length. -
Can this NSv probe be treated as an ordinary 3300 XL 8 mm probe?
No. The NSv family is intended for restricted sideview and small-target applications and has different documented system characteristics. Use the NSv probe, extension cable and Proximitor requirements rather than transferring standard 8 mm assumptions. -
What does the CN suffix require an installer to check?
The approval guide lists CN for 330903 and describes the applicable hazardous-area approval selection. Verify the supplied product certificate, markings and installation conditions; the suffix is not a blanket claim of every certification. -
How much M8 x 1 thread engagement is permitted?
The specified maximum engagement is 12 mm. The 110 mm case length must not be mistaken for an allowed engagement length. -
Is the connector protector part of option 01?
Yes. This option includes a miniature ClickLoc connector with a protector and standard cable. The manufacturer also recommends protection at the other system connections. -
What resistance is documented for the one-metre NSv probe?
The NSv datasheet lists 4.2 +/- 0.5 ohm from the center to outer conductor for a one-metre probe. Standard 8 mm probe resistance values are not the appropriate comparison.
READY TO VERIFY YOUR PART?
Get a 330903-00-11-10-01-CN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
