AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 330908-00-60-10-01-00
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330908-00-60-10-01-00
-
Product Model330908-00-60-10-01-00
-
Product Parameters3300 NSv Proximity Probes
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size2.1x1.9x119cm
-
ManufacturerBently Nevada
-
Weight0.1 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option6.0 in
-
Total Length Option1.0 meter (39 in)
-
Connector and Cable-Type OptionMiniature coaxial ClickLoc connector with connector protector, standardcable
-
Agency Approval OptionNot required
Description
330908 3300 NSv Probe
3/8-24 UNF thread,without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 6.0 in
10 1.0 meter (39 in)
01Miniature coaxial ClickLoc connector
with connector protector, standardcable
00 Not required
3/8-24 UNF thread,without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 6.0 in
10 1.0 meter (39 in)
01Miniature coaxial ClickLoc connector
with connector protector, standardcable
00 Not required
Information
Overview
Manuals
Technical notes
Product Applications
Mechanical Mounting & Clearance
Features:
- Unarmored Design for Flexible Installation
- 6.0-Inch Case Length for Moderate Penetration
- 1.0-Meter Integral Cable with FEP Insulation
- Miniature Coaxial ClickLoc™ Connector with Connector Protector
The 3300 XL NSv Transducer System design allows it toreplace both the 3300 RAM Transducer Systems and the3000-series or 7000-series 190 Transducer System. Upgradesfrom the 3300 RAM system to the 3300 XL NSv system mayuse the existing probe, extension cable, and monitoring3300 XL NSv Proximity Transducer SystemDatasheet147385 Rev. Rsystem with 3300 XL NSv ProximitorSensor. Upgrades from the 3000-series or7000-series Transducer System must replacethe probe, extension cable, and ProximitorSensor with NSv components.
The 330908-00-60-10-01-00 Bently Nevada 3300 NSv Proximity Probes may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330908-00-60-10-01-00 3300 NSv Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 330908-00-60-10-01-00 ordering code decodes as follows: 330908 designates the 3300 NSv probe with 3/8-24 UNF thread and no armor (as opposed to 330902 which has 1/4-28 UNF thread and armor); 00 indicates 0.0-inch unthreaded length (fully threaded body); 60 specifies a 6.0-inch (152.4 mm) overall case length; 10 denotes a 1.0-meter (3.3-foot) total probe cable length; 01 selects the miniature coaxial ClickLoc™ connector with connector protector and standard cable; and 00 confirms no agency approvals required. This configuration is ideal for standard-depth mounting in bearing housings, pump casings, motor end-bells, and compressor frames where moderate thread engagement is required and the installation environment does not demand armored cable protection.
- Centrifugal Air Compressors: Monitoring high-speed impeller shaft stabilization
- Refrigeration Compressors: Providing continuous structural condition metrics inside space-constrained chillers.
- Process Gas Compressors: Delivering non-contact monitoring within restricted-clearance gas enclosures
- Centrifugal Compressors:High-frequency rotor vibration & aerodynamic loading anomalies
- Small-Shaft Machinery: Tailored for small target faces, accurately capturing data on shafts smaller than 51 mm (2 inches)
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Thread Preparation: Ensure the mounting hole is tapped cleanly to a 3/8-24 UNF specification.Side Clearance: Because this is an NSv (Narrow Side View) probe, it requires a smaller counterbore or side-clearance area than standard 8mm probes. Ensure the target area on the shaft is at least 13 mm (0.5 in) wide to prevent side-wall interference from altering the scale factor.
FAQs
-
What is 330908-00-60-10-01-00?+The Bently Nevada 330908 is a standard model from the 3300 XL NSv Proximity Probe series. It provides precise displacement and vibration measurements for critical, tight-clearance rotating machinery like centrifugal compressors and turbines
-
What is the NSv designation?+NSv stands for "Non-Standard" velocity or voltage. This series is specifically engineered for applications with tight side-view or rearview restrictions where standard 3300 XL probes cannot be used. It is highly optimized for small shaft diameters or flat targets smaller than 15 mm (0.6 in).
-
Can it replace older Bently Nevada models?+Yes, the 3300 XL NSv system can replace older 3300 RAM systems and 3000-series/7000-series 190 transducer systems. However, upgrading from the 3000 or 7000-series requires replacing the probe, extension cable, and Proximitor sensor entirely with NSv components.
-
What is the maximum thread engagement?+The industry standard dictates a maximum thread engagement of 14.3 mm (0.563 inches). Exceeding this depth during installation may cause binding and can void the manufacturer's warranty
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
-
-
330104-00-15-50-12-003300 XL 8 mm Probe, M10 x 1 thread,with armorManufacturer: Bently NevadaView Details
-
-
-
330704-000-080-50-12-003300 XL 11 mm Probe, M14 x 1.5 thread,with armorManufacturer: Bently NevadaView Details
-
-
-
-
330172-08-12-50-02-003300 5mm Probe, 1/4-28 UNFthread, with armorManufacturer: Bently NevadaView Details
-
26530-12-10-03-018-085-24-03-00Dual Probe Transducer SystemManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN