PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL Proximity Transducer
- 330851-04-000-027-10-01-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Differential expansion proximity probe
Bently Nevada 330851-04-000-027-10-01-00 is a differential expansion proximity probe. It forms the target-facing component of a matched proximity sensing chain. The probe works with the appropriate extension cable and Proximitor Sensor to measure relative position or differential expansion; it is not a standalone current-loop transmitter.
This order specifies a 2.7-inch smooth side-exit case with a one-metre probe lead. Check the case interface, complete electrical length and matching sensor before installation; probe-only temperature allowances do not extend automatically to other components.
This order specifies a 2.7-inch smooth side-exit case with a one-metre probe lead. Check the case interface, complete electrical length and matching sensor before installation; probe-only temperature allowances do not extend automatically to other components.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 25 mm transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · COLLAR TARGET
Turbine differential-expansion measurement
The probe observes axial movement at a turbine collar in the documented sensing arrangement. Verify the complete 330851-04-000-027-10-01-00 configuration for the installed system. -
02 · COMPLEMENTARY SYSTEM
Two-probe collar monitoring
Probes observing opposite sides of a collar provide complementary differential-expansion measurements when the monitor and target geometry support the arrangement. Verify the complete 330851-04-000-027-10-01-00 configuration for the installed system. -
03 · RAMP TARGET
Ramp-based expansion measurement
A ramp target converts axial motion into a changing gap; a second channel can compensate radial movement according to the manufacturer system design. Verify the complete 330851-04-000-027-10-01-00 configuration for the installed system.
Technical specifications for 330851-04-000-027-10-01-00
-
Product Model330851-04-000-027-10-01-00
-
Spare Model330851-04-000-027-10-01-00
-
Product ParametersDifferential expansion proximity probe
-
In stock9 units
-
ManufacturerBently Nevada
-
Case configuration1.06 in smooth case, side exit
-
Case length2.7 in
-
Total probe length1.0 m
-
ArmorFlexible stainless steel armor
-
Approval option00; not requested
-
Tip materialPEEK
-
Probe caseAISI 304 stainless steel
-
Cable construction75 ohm triaxial
-
Cable insulationHigh-temperature PFA FluidLoc
-
Minimum bend radius25.4 mm
-
Operating temperature-35 to +200 deg C
-
Short-term probe exposureUp to +250 deg C for less than 24 hours
-
Maximum connector torque0.565 N m
-
System scale factor0.787 V/mm
-
Unthreaded length0 in
View all additional
Alternative Names
330851 04 000 027 10 01 00
330851-04-000-027-10-01-00 differential expansion proximity probe
Bently Nevada 330851-04-000-027-10-01-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DIFFERENTIAL EXPANSION PROXIMITY PROBE
Integrating 330851-04-000-027-10-01-00
It forms the target-facing component of a matched proximity sensing chain. The probe works with the appropriate extension cable and Proximitor Sensor to measure relative position or differential expansion; it is not a standalone current-loop transmitter.
Use the complete 3300 XL 25 mm transducer system chain. Conversion from an older transducer family can require replacing probe, extension cable and sensor together, plus reviewing monitor configuration; shared connectors do not prove interchangeability.
Route sensing cable without violating its 25.4 mm minimum bend radius. Keep connectors clean and protected, check target geometry, and set the operating gap using the matched system instructions rather than the physical case length alone.
Features:
- Match complete order, mounting, connections and environmental limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330851-04-000-027-10-01-00 differential expansion proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330851-04-000-027-10-01-00 requires comparing complete order, mounting, connections and environmental limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the complete 3300 XL 25 mm transducer system chain. Conversion from an older transducer family can require replacing probe, extension cable and sensor together, plus reviewing monitor configuration; shared connectors do not prove interchangeability.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330851-04-000-027-10-01-00 differential expansion proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330851-04-000-027-10-01-00 differential expansion proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330851-04-000-027-10-01-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 330851-04-000-027-10-01-00?
It forms the target-facing component of a matched proximity sensing chain. The probe works with the appropriate extension cable and Proximitor Sensor to measure relative position or differential expansion; it is not a standalone current-loop transmitter. -
Which options identify this 330851 configuration?
This order specifies a 2.7-inch smooth side-exit case with a one-metre probe lead. Check the case interface, complete electrical length and matching sensor before installation; probe-only temperature allowances do not extend automatically to other components. -
Which system compatibility checks are required?
Use the complete 3300 XL 25 mm transducer system chain. Conversion from an older transducer family can require replacing probe, extension cable and sensor together, plus reviewing monitor configuration; shared connectors do not prove interchangeability. -
Where is the documented product family applied?
Probes observing opposite sides of a collar provide complementary differential-expansion measurements when the monitor and target geometry support the arrangement. -
What installation precautions apply to this configuration?
Route sensing cable without violating its 25.4 mm minimum bend radius. Keep connectors clean and protected, check target geometry, and set the operating gap using the matched system instructions rather than the physical case length alone. -
Can a similar part number be substituted directly?
No. Compare complete order, mounting, connections and environmental limits. Use the complete 3300 XL 25 mm transducer system chain. Conversion from an older transducer family can require replacing probe, extension cable and sensor together, plus reviewing monitor configuration; shared connectors do not prove interchangeability. -
Are hardware revisions or a direct successor confirmed?
No exact-order hardware revision, discontinuation date or manufacturer-designated successor has been verified. The reference document revision is not the supplied product hardware revision.
READY TO VERIFY YOUR PART?
Get a 330851-04-000-027-10-01-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
330851-04-000-027-10-01-00Differential expansion proximity probeManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
