AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Wednesday, August 19
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 16710-09
-
Product Model16710-09
-
Product ParametersStandard ArmoredInterconnect Cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size20.4x21x3.5cm
-
ManufacturerBently Nevada
-
Weight0.15 kg
-
Operating Temperature-40°C to +105°C (-40°F to +221°F)
-
Capacitance≤ 50 pF/ft (164 pF/m)
-
Impedance100 Ω ±15% (1 MHz)
-
Length9 feet (2.74 meters)
-
Conductors4 conductors
-
Wire Gauge22 AWG stranded copper
-
InsulationFluorinated Ethylene Propylene (FEP)
-
Voltage Rating300V AC/DC
Description
The BENTLY NEVADA 16710-09 is a 9-foot version of the 16710 Standard Armored Interconnect Cable. The 16710 cable family is specified for use with compatible Bently Nevada accelerometer systems, including the 330400 and 330425 accelerometer applications.
The BENTLY NEVADA 16710-09 features a 3-conductor shielded 22 AWG (0.5 mm²) armored cable construction. The armored design provides a mechanically protected cable configuration for industrial installation environments where the interconnect cable may be exposed to vibration, abrasion, or other mechanical stresses.
The BENTLY NEVADA 16710-09 is terminated with a 3-socket plug at one end and terminal lugs at the other end. This configuration provides a direct connection to the compatible sensor on one side and terminal-based connection to the associated monitoring system or equipment on the other side.
The BENTLY NEVADA 16710-09 features a 3-conductor shielded 22 AWG (0.5 mm²) armored cable construction. The armored design provides a mechanically protected cable configuration for industrial installation environments where the interconnect cable may be exposed to vibration, abrasion, or other mechanical stresses.
The BENTLY NEVADA 16710-09 is terminated with a 3-socket plug at one end and terminal lugs at the other end. This configuration provides a direct connection to the compatible sensor on one side and terminal-based connection to the associated monitoring system or equipment on the other side.
Information
Overview
Manuals
Application Notes
Product Applications
Insertion and Connection Steps
Features:
- 3-conductor shielded armored cable
- 22 AWG (0.5 mm²) conductor size
- 9 ft cable length
- Suitable for industrial machinery monitoring installations
The BENTLY NEVADA 16710-09 specifies a 9 ft cable length, corresponding to approximately 2.7 m. The 16710 cable series can be ordered in 1 ft increments, with available lengths from 3.0 ft (0.9 m) to 99 ft (30 m).
The 16710-09 Bently Nevada Standard ArmoredInterconnect Cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 16710-09 Standard ArmoredInterconnect Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 330450 High Temperature Acceleration System (HTAS)segregates the sensing element from the signal conditioningelectronics, with the two permanently connected via ahardline cable. Due to the segregated design, the signalconditioning electronics can be installed in a coolerlocation. This achieves overall transducer systemperformance comparable to other acceleration transducers,but permits use at significantly higher temperatures.
- Gas & Steam Turbines: Tracks radial vibration and casing expansion under high temperatures
- Centrifugal & Axial Compressors: Monitors shaft alignment and surge conditions
- Electric Motors & Generators: Detects bearing wear and rotor imbalances to prevent failure
- Pumps & Gearboxes: Continuously maps distance to fluid-film bearings
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Sensor End (Insertion): Attach the 3-socket MIL-style plug end directly to the pin connector on the Bently Nevada accelerometer (models 330400 or 330425).
Push firmly and thread the locking collar down to seal the connection against moisture and dirt.
Route the Cable: Secure the armored cable along the machine frame using appropriate clamps, avoiding sharp bends, hot surfaces, and high-vibration friction points.
Monitor End (Termination): Connect the bare terminal lugs on the opposite end to the corresponding signal, common/power, and shield/earth ground terminals on your rack monitor or junction box (such as the Bently Nevada 3500 system).
Alternative Names
16710-O9
1671O-09
167I0-09
I6710-09
16710 09
16710 O9
1671O 09
167I0 09
I6710 09
1671009
Technical notes
The BENTLY NEVADA 16710-09 specifies a 9 ft cable length, corresponding to approximately 2.7 m. The 16710 cable series can be ordered in 1 ft increments, with available lengths from 3.0 ft (0.9 m) to 99 ft (30 m).The BENTLY NEVADA 16710-09 is suitable for applications requiring a shielded and armored interconnection between compatible Bently Nevada accelerometers and monitoring equipment. The cable length and termination configuration should be verified before replacement to ensure compatibility with the existing installation.
FAQs
-
Why use the 16710 armored series over non-armored cables?
+The armored design provides physical and mechanical protection in harsh industrial environments, whereas series like the 16925 are non-armored equivalents. -
What is the 16710-09?
+A 3-conductor, shielded 22 AWG armored electrical interconnect cable with a 3-socket plug at one end and terminal lugs at the other. -
How is it physically constructed?
+It features a 3-pin/socket female connector at one end, terminal lugs at the other, and a stainless steel protective armor layer over a shielded 22 AWG (0.5 mm²) 3-conductor electrical core. -
What is the difference between the 16710 and 16925 series?
+The 16710 series is armored for mechanical protection, whereas the 16925 series is the standard unarmored version of the exact same 3-wire cable.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
