PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
16710-30 Armored accelerometer cable
Bently Nevada 16710-30 is a Armored accelerometer cable for the 330400 and 330425 accelerometer system.
Use the 16710-30 for the documented 9.14 m route where armor is required between the 330400 or 330425 accelerometer and the monitoring termination. Maintain spacing from power conductors, bond and terminate the shield as specified, and secure the armor so vibration cannot work the plug or lugs loose. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
Use the 16710-30 for the documented 9.14 m route where armor is required between the 330400 or 330425 accelerometer and the monitoring termination. Maintain spacing from power conductors, bond and terminate the shield as specified, and secure the armor so vibration cannot work the plug or lugs loose. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
BEFORE YOU BUY
Confirm the complete Armored accelerometer cable
ACTUAL APPLICATIONS
Where 16710-30 Fits Across Major Industry Sectors
Uses span oil and gas, paper and food, subject to verified compatibility, operating conditions and project requirements.
-
01 · OIL & GAS
Upstream Oil Production and Petroleum Refining Industries
Crude oil production and processing within upstream energy operations.Petroleum refining for transport fuels and industrial feedstock supply. -
02 · PULP & PAPER
Integrated Pulp Processing and Paper Finishing Operations
Pulp bleaching and chemical recovery within integrated papermaking operations.Paper finishing and converting for commercial paper product manufacturing. -
03 · FOOD & BEVERAGE
Beverage Production and Packaged Consumer Food Manufacturing
Beverage production and processing for commercial food supply markets.Packaged food manufacturing for ready-to-eat consumer food product markets.
Technical specifications for 16710-30
-
Product Model16710-30
-
Product ParametersArmored accelerometer cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Cable Part Number16710-30
-
Cable Construction3-conductor shielded 22 AWG armored cable
-
Conductor Size22 AWG (0.5 mm²)
-
Ordered Length30 ft (9.14 m)
-
Sensor-End Termination3-socket plug
-
Field-End TerminationIndividual terminal lugs
-
Minimum Order Length3 ft (0.9 m)
-
Maximum Order Length99 ft (30 m)
-
Supported Transducers330400 and 330425 accelerometers
-
Sensor Supply Reference-24 ±0.5 V DC
-
Nominal Bias Current2 mA
-
Output Bias Reference-8.5 ±0.5 V DC
-
System Cable Limit305 m (1000 ft)
-
Sensor GroundingCase isolated
-
Commissioning CheckVerify continuity, shield and signal polarity
View all additional
Alternative Names
16710 30
16710-30 3-conductor shielded 22 AWG armored cable
Bently Nevada Armored accelerometer cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 16710-30 to the installed 330400 and 330425 accelerometer system
Bently Nevada 16710-30 is a Armored accelerometer cable documented for the 330400 and 330425 accelerometer system. Use the 16710-30 for the documented 9.14 m route where armor is required between the 330400 or 330425 accelerometer and the monitoring termination.
Maintain spacing from power conductors, bond and terminate the shield as specified, and secure the armor so vibration cannot work the plug or lugs loose. Confirm 30 ft (9.14 m), 3-socket plug, mechanical location and the approved system configuration before connection.
Measure conductor continuity and insulation before connection, confirm the -8.5 V bias reference at the channel and check the live acceleration response. Use qualified personnel, retain the official manufacturer instructions at the work location and save the final commissioning results with the equipment record.
Features:
- Exact identity: 16710-30
- Product class: Armored accelerometer cable
- Family: 330400 and 330425 accelerometer system
The Bently Nevada 16710-30 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 16710-30 configuration before exchange
Replace 16710-30 only after matching the full product identity, 30 ft (9.14 m), 3-socket plug and installed system role. A similar family name or partial article number does not establish direct interchangeability.
Photograph the module label, rack or control-unit position, every connector, cable route, shield, earth point and companion module before removal. Compare the documented electrical and communication limits against the saved project or rack configuration.
After installation, restore the controlled configuration and complete the model-specific checks described in the official manufacturer document. Record status indications, diagnostics, signal or communication results and the final acceptance evidence before release.
Features:
- Match exact 16710-30 identity
- Confirm 3-socket plug
- Record -24 ±0.5 V DC
The Bently Nevada 16710-30 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for 16710-30
- Bently Nevada manufacturer pages attached
- Exact identity required before installation
Documentation for Bently Nevada 16710-30 must match the installed system and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544429090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 16710-30
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the -30 code mean on Bently Nevada 16710-30?
It denotes a 30 ft standard length, approximately 9.14 m, for the armored 16710 accelerometer interconnect cable. -
How does 16710-30 differ from 16925-30?
Both use shielded 22 AWG conductors and the same end styles, but 16710 is armored while 16925 is the standard non-armored construction. -
Which route survey is needed for the long armored assembly?
Confirm the entire 9.14 m path, supports, conduit entries, separation from high-current wiring, bending space, heat exposure and termination locations. -
What connector arrangement should appear on a correct 16710-30 cable?
The manufacturer describes a 3-socket plug at the accelerometer end and individual terminal lugs at the opposite end. -
Can the 30-foot armored cable exceed the sensor system cable limit?
The overall 330400/330425 system permits up to 305 m (1000 ft), but all connected cable segments and the site design must be included in that check. -
What continuity test should be completed before field connection?
Check each conductor end to end, verify no conductor-to-shield or conductor-to-armor fault, and document shield continuity before attaching the sensor. -
Which ordering details prevent substitution of the wrong Bently cable?
Quote the full 16710-30 number, armored construction, 30 ft length, 330400/330425 application, quantity, condition and delivery requirements. -
How is signal quality confirmed after installing 16710-30?
Verify sensor supply and output bias, inspect the noise floor, compare vibration response with the baseline and check the monitoring channel for stable operation.
READY TO VERIFY YOUR PART?
Get a 16710-30 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
16710-30Armored accelerometer cableManufacturer: Bently NevadaView Details
-
16925-35Shielded sensor interconnect cableManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
