PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
The BENTLY NEVADA 16710-07 belongs to the 16710 Series Standard Armored Interconnect Cable family. The "-07" ordering code specifies a 7-foot (approximately 2.1 m) cable length, making it suitable for installations where a short-to-medium cable run is required between the sensor and monitoring equipment. The 16710 Series is available in standard lengths from 3 ft to 99 ft, with custom lengths also available.
The BENTLY NEVADA 16710-07 uses a 3-conductor shielded 22 AWG (0.5 mm²) cable protected by stainless steel armor. The shield minimizes electromagnetic interference (EMI), while the armored construction provides additional mechanical protection against abrasion, vibration, and harsh industrial operating conditions.
The BENTLY NEVADA 16710-07 uses a 3-conductor shielded 22 AWG (0.5 mm²) cable protected by stainless steel armor. The shield minimizes electromagnetic interference (EMI), while the armored construction provides additional mechanical protection against abrasion, vibration, and harsh industrial operating conditions.
Technical specifications for 16710-07
-
Product Model16710-07
-
Product Parameters7-foot interconnect and extension cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size25x24x2.5cm
-
ManufacturerBently Nevada
-
Weight0.2 kg
-
Cable Length7 ft (2.1 m)
-
Conductor Configuration3-Conductor
-
Wire Gauge22 AWG (0.5 mm²)
-
ShieldingShielded
-
ArmorStainless Steel Armored
-
Field EndTerminal Lugs
-
Minimum Standard Length3 ft (0.9 m)
-
Maximum Standard Length99 ft (30 m)
View all additional
Alternative Names
16710-O7
1671O-07
167I0-07
I6710-07
16710 07
16710 O7
1671O 07
167I0 07
I6710 07
1671007
Technical notes
The BENTLY NEVADA 16710-07 is intended for fixed industrial installations where dependable signal transmission and long service life are essential. The combination of shielded conductors, armored protection, and industrial-grade connectors helps maintain signal integrity in environments with vibration, electrical noise, and mechanical stress.
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
Overview
Manuals
Application Notes
Product Applications
Installation Guidelines
Features:
- 3-conductor shielded construction
- Stainless steel armor protection
- Optimized connector configuration
- Wide operating temperature range
The 16710-07 serves as the critical signal transmission link between the accelerometer sensor and the monitoring or protection system, ensuring that casing acceleration and vibration data collected from critical rotating machinery reaches the monitoring rack without signal degradation. This cable is an essential component in machinery protection systems for turbines, compressors, centrifugal pumps, and other high-speed rotating equipment
The 16710-07 Bently Nevada 7-foot interconnect and extension cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 16710-07 7-foot interconnect and extension cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The cable's stainless steel armored jacket provides exceptional mechanical durability, protecting against pulling, abrasion, and physical impacts commonly encountered in refineries, offshore platforms, power plants, and other heavy industrial settings. This armored construction ensures that the 16710-07 maintains reliable performance even under demanding conditions involving chemicals, salt, weather exposure, and continuous mechanical vibration
The 16710-07 is engineered with a 3-socket plug connector at the accelerometer/Proximitor end and terminal lugs at the monitor/rack end, ensuring secure, vibration-resistant connections that remain stable even in damp or challenging conditions. The cable supports a wide operating temperature range of –40°C to +85°C (–40°F to +185°F) and a storage range of –50°C to +105°C, with a flame-retardant thermoplastic jacket rated UL 94 V-0. The 16710-07 also features high-density polyethylene insulation and a nominal impedance of 100Ω, with a voltage rating of 60V DC maximum and a current rating of 1A per conductor.
- Oil Refineries: Monitors catalytic cracking compressors and high-pressure pumps
- Petrochemical Plants: Tracks rotor vibration and axial position in ethylene/ammonia production trains
- Power Plants: Deployed on steam, gas, and hydro turbines to prevent shaft failures
- Offshore Platforms: Protects injection/export compressors against ocean conditions and hazardous vapors
- LNG Facilities: Safeguards cryogenic pumps and liquefaction compression trains
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Handling: Route the armored cable carefully, avoiding sharp bends that violate the minimum bend radius of the armored assembly.
Securing: Fasten and anchor the armor using appropriate industrial cable glands and clamps to protect against heavy vibration or mechanical wear.
Grounding: Ensure the shield drain wire is terminated at a single designated grounding point (typically at the monitor or I/O rack end) to avoid ground loops.
Mating: Push and thread the 3-socket plug firmly onto the accelerometer pin connector, ensuring a tight, moisture-resistant fit before securing any locking sleeves.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 16710-07
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is its primary application?
Connecting proximity sensors or transducers to a Proximitor module or monitoring rack in rotating machinery setups. -
Can it be field-spliced?
No, field splicing is discouraged because altering impedance introduces signal measurement errors and gap voltage inaccuracies. -
How should it be installed in high-vibration areas?
Secure the armored line with clamps or ties at regular intervals to prevent mechanical fatigue on the pins and connectors. -
What type of physical protection does it offer?
It features integrated armoring to shield internal signal lines from mechanical damage and heavy electromagnetic interference.
READY TO VERIFY YOUR PART?
Get a 16710-07 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
