PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
16710-12 Armored accelerometer cable
Bently Nevada 16710-12 is a Armored accelerometer cable for the 330400 and 330425 accelerometer system. Use the armored 16710-12 where a short accelerometer route needs additional mechanical protection between the machine casing and nearby junction point. Support the armor away from hot or moving surfaces, leave no load on the 3-socket plug and preserve the shield path to the terminal-lug end. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
BEFORE YOU BUY
Confirm the complete Armored accelerometer cable
ACTUAL APPLICATIONS
16710-12
Armored Accelerometer Cable applications
Apply 16710-12 only within the documented 330400 and 330425 accelerometer system configuration and verify all power, control and cooling interfaces before service.
-
01 · SHORT ARMORED SENSOR RUN
Protect a
12-foot field connectionUse the armored 16710-12 where a short accelerometer route needs additional mechanical protection between the machine casing and nearby junction point. -
02 · MACHINE-CASING INSTALLATION
Secure the
cable beside the sensorSupport the armor away from hot or moving surfaces, leave no load on the 3-socket plug and preserve the shield path to the terminal-lug end. -
03 · OUTAGE REPLACEMENT CHECK
Restore the
original 3.6-metre routeCompare the removed length and armor condition, reproduce the documented routing, and confirm continuity, shield integrity and sensor bias after replacement.
Technical specifications for 16710-12
-
Product Model16710-12
-
Product ParametersArmored accelerometer cable
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerBently Nevada
-
Cable Part Number16710-12
-
Cable Construction3-conductor shielded 22 AWG armored cable
-
Conductor Size22 AWG (0.5 mm²)
-
Ordered Length12 ft (3.6 m)
-
Sensor-End Termination3-socket plug
-
Field-End TerminationIndividual terminal lugs
-
Minimum Order Length3 ft (0.9 m)
-
Maximum Order Length99 ft (30 m)
-
Supported Transducers330400 and 330425 accelerometers
-
Sensor Supply Reference-24 ±0.5 V DC
-
Nominal Bias Current2 mA
-
Output Bias Reference-8.5 ±0.5 V DC
-
System Cable Limit305 m (1000 ft)
-
Sensor GroundingCase isolated
-
Commissioning CheckVerify continuity, shield and signal polarity
View all additional
Alternative Names
16710 12
16710-12 3-conductor shielded 22 AWG armored cable
Bently Nevada Armored accelerometer cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 16710-12 to the installed 330400 and 330425 accelerometer system
Bently Nevada 16710-12 is a Armored accelerometer cable documented for the 330400 and 330425 accelerometer system. Use the armored 16710-12 where a short accelerometer route needs additional mechanical protection between the machine casing and nearby junction point.
Support the armor away from hot or moving surfaces, leave no load on the 3-socket plug and preserve the shield path to the terminal-lug end. Confirm 12 ft (3.6 m), 3-socket plug, mechanical location and the approved system configuration before connection.
Compare the removed length and armor condition, reproduce the documented routing, and confirm continuity, shield integrity and sensor bias after replacement. Use qualified personnel, retain the official manufacturer instructions at the work location and save the final commissioning results with the equipment record.
Features:
- Exact identity: 16710-12
- Product class: Armored accelerometer cable
- Family: 330400 and 330425 accelerometer system
The Bently Nevada 16710-12 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 16710-12 configuration before exchange
Replace 16710-12 only after matching the full product identity, 12 ft (3.6 m), 3-socket plug and installed system role. A similar family name or partial article number does not establish direct interchangeability.
Photograph the module label, rack or control-unit position, every connector, cable route, shield, earth point and companion module before removal. Compare the documented electrical and communication limits against the saved project or rack configuration.
After installation, restore the controlled configuration and complete the model-specific checks described in the official manufacturer document. Record status indications, diagnostics, signal or communication results and the final acceptance evidence before release.
Features:
- Match exact 16710-12 identity
- Confirm 3-socket plug
- Record -24 ±0.5 V DC
The Bently Nevada 16710-12 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for 16710-12
- Bently Nevada manufacturer pages attached
- Exact identity required before installation
Documentation for Bently Nevada 16710-12 must match the installed system and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544429090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 16710-12
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 16710-12 include mechanical cable armor?
Yes. The 16710 family is the armored 3-conductor shielded 22 AWG option; code 12 specifies 12 ft, approximately 3.6 m. -
Why must the installed route be checked before ordering a 12-foot cable?
The assembly must reach without tension while avoiding excess coiling, sharp bends, hot surfaces and moving parts; verify the actual controlled route first. -
What is the minimum order length for a 16710 armored cable?
Bently Nevada specifies a 3 ft (0.9 m) minimum for the armored 16710 family and a 99 ft (30 m) maximum. -
How should the accelerometer-end plug be protected during installation?
Keep the connector clean, align and seat the 3-socket plug without twisting the sensor, then support the armor so it does not load the receptacle. -
Which machine-monitoring family should be named on a 16710-12 request?
Reference the Bently Nevada 330400 or 330425 accelerometer system along with the exact 16710-12 cable and required quantity. -
What photographs should maintenance take before removing the short cable?
Capture the part marking, sensor location, cable supports, shield treatment, terminal-lug sequence and the complete route to the monitoring termination. -
When should a 16710-12 assembly be replaced rather than reused?
Replace it when armor, insulation, plug, lugs or shield integrity is damaged or when continuity and noise checks do not meet the site acceptance criteria. -
What receiving checks apply to an armored 16710-12 cable?
Verify the 12 ft length code, armor and jacket condition, 3-socket plug, individual lugs, continuity and absence of transport damage.
READY TO VERIFY YOUR PART?
Get a 16710-12 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
