AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 16925-17
-
Product Model16925-17
-
Product ParametersStandard Interconnect Cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size25x25x3cm
-
ManufacturerBently Nevada
-
Weight0.2 kg
-
Length17 Feet
-
Conductors3-conductor
-
Conductor Gauge22 AWG (0.5 mm²)
-
ShieldingOverall shield for EMI protection
-
Operating Temperature-35°C to +105°C
Description
3-conductor shielded
22 AWG (0.5 mm2) cable
with 3-socketplug at one end
terminal lugs at the other end
Minimum lengthof 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)
22 AWG (0.5 mm2) cable
with 3-socketplug at one end
terminal lugs at the other end
Minimum lengthof 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)
Information
Overview
Manuals
Technical notes
Product Applications
Installation & Maintenance Instructions
Features:
- 3-conductor shielded
- 22 AWG (0.5 mm2) armored cable with 3- socket plug at one end
- Terminal lugs at the other end
These accelerometers are intended for critical machineryapplications where casing acceleration measurements arerequired, such as gear mesh monitoring. The 330400 isdesigned to address the requirements of AmericanPetroleum Institute Standard 670 for accelerometers. Itprovides an amplitude range of 50 g peak and a sensitivity of100 mV/g. The 330425 is identical except it provides a largeramplitude range (75 g peak) and a sensitivity of 25 mV/g.
The 16925-17 Bently Nevada Interconnect Cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 16925-17 Interconnect Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Bently Nevada 16925-17 is a 17-foot (5.18-meter) interconnect cable designed for industrial vibration monitoring systems, typically used to connect accelerometers to monitoring systems. It is a 3-conductor shielded cable, frequently paired with Bently Nevada 330525 Series acceleration transducers.
- Industrial Gearboxes:High-frequency (15 kHz) gear mesh monitoring detects wear & misalignment
- Centrifugal & Reciprocating Compressors:Monitors casing vibration for early fault detection & predictive maintenance
- Steam and Gas Turbines:Monitors structural & casing vibrations in power generation & oil/gas assets
- Electric Motors:Measures bearing housing & casing vibration to diagnose imbalance or bearing failure
- Industrial Pumps:Diagnoses vibration issues in large-scale centrifugal pumps
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Proper Routing: Ensure the cable is protected from mechanical damage and extreme heat. Use conduit where possible to maintain signal integrity.
Minimum Bend Radius: Avoid sharp bends during installation to prevent damage to the internal shielding and conductors.
Clean Connections: Ensure the 3-socket plug and terminal lugs are free of debris or oxidation before connection. Use a dry cloth for cleaning; avoid harsh chemicals.
Grounding: The shield should be properly grounded (typically at the monitor end) to reduce electrical interference and ensure accurate vibration measurements.
FAQs
-
What is the length of the 16925-17 cable?
+The "17" in the model number designates a length of 17 feet, or approximately 5 meters. -
What is the 16925-17？
+The Bently Nevada 16925-17 is a 17-foot (5.2-meter), 3-conductor shielded interconnect cable designed for vibration monitoring systems, typically connecting accelerometers to monitoring equipment. -
What is the construction of the cable?
+It is a 3-conductor shielded 22 AWG (0.5 mm²) cable designed for high performance in noisy industrial environments. -
What is the maximum cable length?
+While this specific model is 17 feet, the 16925 series can be customized up to a maximum length of 99 feet (30 m). -
What are typical applications?
+These cables are used with Bently Nevada vibration sensors (such as 330400 or 330425 accelerometers) for critical machinery monitoring, including gear mesh and casing acceleration.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN