AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Thursday, June 11
Fast Shipping Available
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 16925-60
-
Product Model16925-60
-
Product ParametersArmored or non-armored 22 AWG cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size27x25x3cm
-
ManufacturerBently Nevada
-
Weight0.38 kg
-
Conductor Count3 conductors
-
Wire Gauge22 AWG (0.5 mm²) tinned copper
-
Insulation MaterialHigh-grade PFAS (perfluoroalkoxy) or FEP
-
Jacket MaterialPVC
-
Characteristic Impedance50 Ω ±3%
-
Capacitance≤18 pF/ft (60 pF/m)
-
Voltage Rating≤300 V AC/DC working voltage
Description
Alternative Names
16925 60
I6925-60
16925-6O
I6925-6O
I6925 6O
Information
Overview
Manuals
Application Notes
Product Applications
Cable Routing & Protection
Features:
- 3-Wire Cable
- CENELEC Zone 1, Group IIC hazardous area rating
- Armored or non-armored 22 AWG cable
- Non-armored 18 AWG cable with elastomer boot
These accelerometers are intended for critical machineryapplications where casing acceleration measurements arerequired, such as gear mesh monitoring. The 330400 isdesigned to address the requirements of AmericanPetroleum Institute Standard 670 for accelerometers. Itprovides an amplitude range of 50 g peak and a sensitivity of100 mV/g. The 330425 is identical except it provides a largeramplitude range (75 g peak) and a sensitivity of 25 mV/g.
The 16925-60 Bently Nevada Armored or non-armored 22 AWG cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 16925-60 Armored or non-armored 22 AWG cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Constructed with 22 AWG (0.5 mm²) conductors and overall shielding, the 16925-60 provides stable signal transmission over extended cable runs while maintaining excellent noise immunity. The 60-foot length allows flexible routing between field-mounted sensors and control room equipment in large industrial installations such as power plants, compressor stations, petrochemical facilities, and manufacturing sites.
- Oil & Gas:Refining/offshore: monitors critical compressors & pumps
- Power Generation:Steam/gas turbines: tracks axial thrust & radial vibration
- Manufacturing & Mining:Paper/steel/mines: protects large motors & gearboxes
- Electric Motors and Generators:Rotor vibration & misalignment for large motors/generators
- Gearboxes:Internal shaft stability for high-speed industrial gearboxes
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Since the 16925 series is non-armored, avoid routing cables in high-traffic areas, near sharp edges, or in locations where they might be crushed or severed.Whenever possible, run the cables through protective rigid or flexible conduit to shield them from environmental hazards like heat, vibration, and debris.Verify both ends of the connection: the sensor side and the monitoring system terminal. The cable features a 3-socket MIL-C-5015 compatible connector on the sensor end.
Technical notes
Bently Nevada extension cables are armored or non-armored 3-conductor 0.5 mm2 (22 AWG) with 3-socket plug at one end and terminal ring lugs at the other, or non-armored 3-conductor 1.0mm2 (18 AWG) with 3-socket plug and fluorosilicone elastomer boot at one end, terminal lugs at the other.
FAQs
-
What is the 16925-60？
+The Bently Nevada 16925-60 refers to a 60-foot, 3-conductor non-armored interconnect cable used to transmit reliable signal data between machine sensors -
What sensors are compatible with this cable?
+The 16925 series is specifically designed for Bently Nevada accelerometers that utilize a 3-socket MIL-C-5015 compatible connector (like the 330400 and 330425 models). -
What does the -60 in the part number mean?
+The suffix indicates the cable length in feet. Therefore, the 16925-60 designates a cable that is exactly 60 feet (18.3 meters) long. -
What equipment does the 16925-60 cable connect?
+It is designed to relay reliable signal transmission between vibration sensors (e.g., 330400 or 330425 accelerometers) and monitor racks like the 3300 or 3500 series.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN