PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Shielded sensor interconnect cable
Bently Nevada 16925-66 is a sensor interconnect cable. The interconnect cable carries the signal between the documented seismic transducer and the receiving monitoring equipment. Its conductor arrangement and connector differ from the calibrated extension cables used inside a proximity-probe system. Select the correct sensor interface and cable construction.
The specified cable length is 66 ft. Match the socket count, conductor size, cable protection and receiving terminal arrangement to the installed sensor. Unresolved modifications must be checked separately. The standard cable description does not establish a modified assembly rating or an approval certificate.
The specified cable length is 66 ft. Match the socket count, conductor size, cable protection and receiving terminal arrangement to the installed sensor. Unresolved modifications must be checked separately. The standard cable description does not establish a modified assembly rating or an approval certificate.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 330400/330425 accelerometer interconnections
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · SENSOR CONNECTIONS
Seismic monitoring signal path
The cable connects the documented sensor interface to the monitoring equipment. Verify the conductor count and termination arrangement so the receiving channel gets the intended seismic measurement. -
02 · BEARING MONITORING
Bearing-housing measurement wiring
The associated sensor family supports bearing-housing measurements. The cable carries that sensor output to a compatible monitoring channel; it does not create or condition the measurement by itself. -
03 · MACHINE CASINGS
Casing monitoring connections
Use the interconnection within the manufacturer-documented seismic sensing arrangement. The monitoring input, sensor and wiring must agree; a similar cable length is not sufficient proof of compatibility.
Technical specifications for 16925-66
-
Product Model16925-66
-
Product ParametersShielded sensor interconnect cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Cable length66 ft
-
Conductor countThree
-
Conductor size22 AWG
-
ShieldingShielded cable
-
Sensor connectorthree-socket plug
-
Instrument terminationTerminal lugs
View all additional
Alternative Names
16925-66 sensor interconnect cable
Bently Nevada 16925-66
16925 66 sensor interconnect cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SHIELDED SENSOR INTERCONNECT CABLE
Integrating 16925-66
The interconnect cable carries the signal between the documented seismic transducer and the receiving monitoring equipment. Its conductor arrangement and connector differ from the calibrated extension cables used inside a proximity-probe system. Select the correct sensor interface and cable construction.
The official 330400/330425 accelerometer datasheet lists this cable family as an interconnection option. It has a three-socket sensor interface; do not confuse it with the two-wire Velomitor cable families.
Connect the documented sensor-side socket connector and instrument-side terminal lugs according to the sensor installation instructions. Confirm the wiring assignments and cable route. The presence of a connector, boot or armor does not by itself establish the completed installation protection rating.
Features:
- Match complete ordering options, sensing-chain configuration, mounting and target arrangement
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 16925-66 sensor interconnect cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 16925-66 requires comparing complete ordering options, sensing-chain configuration, mounting and target arrangement. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The official 330400/330425 accelerometer datasheet lists this cable family as an interconnection option. It has a three-socket sensor interface; do not confuse it with the two-wire Velomitor cable families.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 16925-66 sensor interconnect cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 16925-66 sensor interconnect cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27x27x3cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 16925-66
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the cable configuration of 16925-66?
The specified cable length is 66 ft. Match the socket count, conductor size, cable protection and receiving terminal arrangement to the installed sensor. Unresolved modifications must be checked separately. The standard cable description does not establish a modified assembly rating or an approval certificate. -
What does this interconnect cable do?
The interconnect cable carries the signal between the documented seismic transducer and the receiving monitoring equipment. Its conductor arrangement and connector differ from the calibrated extension cables used inside a proximity-probe system. Select the correct sensor interface and cable construction. -
Which transducer family is it documented for?
The official 330400/330425 accelerometer datasheet lists this cable family as an interconnection option. It has a three-socket sensor interface; do not confuse it with the two-wire Velomitor cable families. -
Where is it used in a monitoring system?
The associated sensor family supports bearing-housing measurements. The cable carries that sensor output to a compatible monitoring channel; it does not create or condition the measurement by itself. -
What should be checked before wiring?
Connect the documented sensor-side socket connector and instrument-side terminal lugs according to the sensor installation instructions. Confirm the wiring assignments and cable route. The presence of a connector, boot or armor does not by itself establish the completed installation protection rating. -
Can it replace a calibrated proximity-probe extension cable?
No. This is a conductor-based seismic signal interconnection. A proximity-probe extension cable belongs to a different calibrated measuring chain; matching a physical length does not establish electrical compatibility. -
What does the length suffix mean?
For a standard published order, the numeric suffix specifies the cable length in feet. Apply the published length range for the exact cable family. An XX field or factory MOD is not a numeric length and must not be decoded by assumption.
READY TO VERIFY YOUR PART?
Get a 16925-66 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
