PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Armored sensor interconnect cable
Bently Nevada 106765-13 is an armored 13 m interconnect cable for the documented Velomitor XA sensor installation. The manufacturer cable drawing identifies its shield connection, stainless steel armor and splash-resistant boot assembly, which must be fitted with the correct mating hardware.
The cable must be matched to the selected sensor and termination arrangement. Its length code is stated in meters, unlike several other Bently Nevada cable families. Do not transfer the sensor sensitivity, velocity range or temperature rating to this accessory.
The cable must be matched to the selected sensor and termination arrangement. Its length code is stated in meters, unlike several other Bently Nevada cable families. Do not transfer the sensor sensitivity, velocity range or temperature rating to this accessory.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 106765-13 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 106765-13
-
Product Model106765-13
-
Product ParametersArmored sensor interconnect cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Ordered cable length13 m
-
Mechanical protectionArmored cable
-
Conductor gauge22 AWG
-
Sensor terminationVelomitor XA mating cable assembly
-
Monitor terminationWhite A, black B and green SHLD leads
-
Armor constructionStainless steel
-
Protective bootSplash-resistant boot with clamps
-
Overall length tolerancePlus or minus 200 mm
-
Family ordering range1 to 25 m in 3 m increments
View all additional
Alternative Names
106765 13
106765-13 armored sensor interconnect cable
Bently Nevada 106765-13
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ARMORED SENSOR INTERCONNECT CABLE
Integrating 106765-13
Bently Nevada 106765-13 is an armored 13 m interconnect cable for the documented Velomitor XA sensor installation. The manufacturer cable drawing identifies its shield connection, stainless steel armor and splash-resistant boot assembly, which must be fitted with the correct mating hardware.
The cable must be matched to the selected sensor and termination arrangement. Its length code is stated in meters, unlike several other Bently Nevada cable families. Do not transfer the sensor sensitivity, velocity range or temperature rating to this accessory.
For this order, verify 13 m; Armored cable; 22 AWG. Family specifications apply only to the documented component and installation. Check the complete supplied identity before selecting mating equipment.
Features:
- Match the complete ordered configuration
- Use the correct manufacturer documentation
- Keep component and system specifications distinct
The 106765-13 armored sensor interconnect cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 106765-13 identity and the documented installation before replacement. Similar appearance, connector size or a shared family name does not establish an unconditional substitute.
Only the documented mating sensor and terminal arrangement are established. Verify the actual housing and cable entry rather than assuming every Bently Nevada accessory interchanges.
No exact-order hardware revision, discontinuation date or designated successor was established in the reviewed manufacturer materials. Publication revision M is not a product hardware revision; unverified lifecycle claims are not added.
Features:
- Confirm exact identity before replacement
- Check field wiring and mounting requirements
- Do not infer lifecycle facts from age
The 106765-13 armored sensor interconnect cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 106765-13 armored sensor interconnect cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size32 x 32 x 5 cm
-
Shipping weight1.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 106765-13
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What length is specified for 106765-13?
The documented order selects 13 m. The 106765 family uses meters. -
Which connections must be checked before replacement?
Velomitor XA mating cable assembly is specified at the sensor side. Check the documented termination arrangement at the other end and the actual mating equipment. -
Does this cable have a vibration measurement range?
No. Measurement range and sensitivity are specifications of the sensor and monitoring equipment, not the passive cable. -
Can it replace a proximity extension cable?
No such substitution is established. A proximity extension cable is part of a matched probe and Proximitor chain; this accessory serves the documented vibration sensor interconnection. -
What is important about the protective construction?
Armored cable is documented. The splash-resistant boot and clamps must be correctly fitted to the Velomitor XA assembly. -
Are all sensor housings compatible?
Only the documented mating sensor and terminal arrangement are established. Verify the actual housing and cable entry rather than assuming every Bently Nevada accessory interchanges.
READY TO VERIFY YOUR PART?
Get a 106765-13 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
