AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Wednesday, September 2
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 89477-30
-
Product Model89477-30
-
Product ParametersRight Angle Interconnect Cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size12x12.5x1.2cm
-
ManufacturerBently Nevada
-
Weight0.06 kg
-
Conductors2 × 18 AWG (0.823 mm²)
-
Temperature Range-40 … +105 °C (UL 105 °C)
-
Conductor resistance≤ 22 Ω/km
-
Characteristic impedance50 Ω @ 1 MHz
-
Velocity of propagation0.70 c
-
Voltage rating300 V rms
Description
The BENTLY NEVADA 89477-30 belongs to the 89477 Series Right Angle Interconnect Cable family. The "-30" suffix a 30-foot (9.14 m) cable length, making it suitable for medium-distance installations in machinery protection and condition monitoring systems. The right angle connector configuration is particularly useful where installation space around the transducer is limited.
The BENTLY NEVADA 89477-30 is manufactured with 18 AWG (0.963 mm²) shielded instrumentation cable that provides dependable signal integrity while minimizing electromagnetic interference (EMI). The heavier conductor size offers excellent electrical performance and mechanical durability for industrial environments.
The BENTLY NEVADA 89477-30 incorporates a moisture-resistant right angle female connector at the transducer end, helping protect the electrical connection against moisture and contaminants. The ring lug terminations at the monitor end allow straightforward connection to monitoring systems, terminal blocks, or junction boxes.
The BENTLY NEVADA 89477-30 is manufactured with 18 AWG (0.963 mm²) shielded instrumentation cable that provides dependable signal integrity while minimizing electromagnetic interference (EMI). The heavier conductor size offers excellent electrical performance and mechanical durability for industrial environments.
The BENTLY NEVADA 89477-30 incorporates a moisture-resistant right angle female connector at the transducer end, helping protect the electrical connection against moisture and contaminants. The ring lug terminations at the monitor end allow straightforward connection to monitoring systems, terminal blocks, or junction boxes.
Information
Overview
Manuals
Application Notes
Product Applications
Monitor Connection
Features:
- Right Angle Connector Design
- 18 AWG Twisted-Pair Shielded Construction
- Terminal Lugs at Monitor End
- Hermetically Sealed 2-Pin Connector
The 89477-30 features a rugged 2-conductor 18 AWG twisted, shielded construction that ensures reliable signal transmission and effective rejection of electromagnetic interference in electrically noisy industrial environments. The right angle 2-socket plug at the sensor end of the 89477-30 is specifically engineered for installations where space is constrained, such as in tight turbine housings or bearing housing locations where a straight connector cannot be accommodated.
The 89477-30 Bently Nevada Right Angle Interconnect Cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 89477-30 Right Angle Interconnect Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 89477-30 is equipped with a hermetically sealed 2-pin Mil-C-5015 receptacle connector constructed of 300 series stainless steel, providing exceptional durability and protection against moisture and contaminants in demanding hydroelectric and industrial environments. The 89477-30 supports cable runs up to 305 meters (1000 feet) with no degradation of signal when used with the 3500/46M Hydro Monitor, meeting the requirements of International Organization for Standardization (ISO) Standard 10816-5 for mechanical vibration on non-rotating parts in hydraulic power and pumping plants. The cable's shielding and twisted-pair design ensure that the low-level velocity signals from the 330505 sensor—operating within a frequency range of 0.5 to 1000 Hz—are transmitted with precision and integrity to the monitoring system.
- Oil & Gas: Monitors offshore platforms, refineries, and pipelines
- Power Generation: Monitors steam, gas, and hydro turbines/generators
- Petrochemical Processing: Tracks high-speed rotating equipment in harsh chemical environments
- Water & Wastewater: Monitors machinery health for large centrifugal pumps and treatment infrastructure
- Heavy Manufacturing: Used on compressors, fans, and blowers
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Route the cable: Run the 30-foot 2-conductor 18 AWG twisted, shielded cable away from high-voltage power lines to prevent electrical noise.
Attach terminal lugs: Connect the terminal lugs at the opposite end to the designated input terminals on the vibration monitor or rack (such as a Bently Nevada monitoring card).
Alternative Names
89477-3O
89A77-30
B9477-30
89477 30
89477 3O
B9477 30
Technical notes
The BENTLY NEVADA 89477-30 is designed to operate within a temperature range of -29°C to 121°C (-20°F to 250°F), making it suitable for use in demanding industrial applications such as power generation, oil and gas production, petrochemical processing, mining, and heavy manufacturing facilities.
FAQs
-
What are the connector types?
+A right-angle 2-socket plug on one end and terminal lugs on the other. -
Can this cable be extended in the field?
+No, modifying or cutting the assembly changes its electrical characteristics and signal integrity. -
What type of wire is used?
+2-conductor 18 AWG twisted, shielded cable -
What does the -30 suffix indicate?
+The suffix explicitly denotes the cable length option measured in feet. Other variations exist, such as 10, 15, or 80-foot lengths.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
