PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Casing vibration velocity sensor
Bently Nevada 330500-00-00 is a piezo-velocity sensor. The solid-state piezo-velocity sensor measures absolute vibration of bearing housings, machinery casings or structures. It uses no moving parts and can operate in any orientation. A suitable vibration-monitoring channel receives its velocity signal; correct mechanical mounting remains essential.
Match the complete mounting-adapter and approval suffixes to the installation and supplied marking. The sensor measures casing motion, so the machine must transmit the vibration of interest to the chosen mounting location. Unresolved options require confirmation before replacement.
Match the complete mounting-adapter and approval suffixes to the installation and supplied marking. The sensor measures casing motion, so the machine must transmit the vibration of interest to the chosen mounting location. Unresolved options require confirmation before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330500-00-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 330500-00-00
-
Product Model330500-00-00
-
Product ParametersCasing vibration velocity sensor
-
In stock4 units
-
ManufacturerBently Nevada
-
Mounting adapter optionNo adapter
-
Agency approval optionNo approvals; check supplied marking
-
Nominal sensitivity3.94 mV per mm/s, +/-5% at reference conditions
-
Frequency response4.5 Hz to 5 kHz, +/-3 dB
-
Velocity measurement range1270 mm/s peak
-
Transverse sensitivityLess than 5%
-
Amplitude linearity+/-2% up to 152 mm/s peak
-
Mounted resonant frequencyGreater than 12 kHz
-
Output bias-12 +/-3 Vdc
-
Dynamic output impedanceLess than 2400 ohm
-
Case isolationSignal isolated from the case
-
Operating temperature-55 to +121 deg C
-
Maximum shock5000 g peak
-
Case material316L stainless steel
-
ConnectorTwo-pin hermetic MIL-C-5015
View all additional
Alternative Names
330500-00-00 piezo-velocity sensor
Bently Nevada 330500-00-00
330500 00 00 piezo-velocity sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
CASING VIBRATION VELOCITY SENSOR
Integrating 330500-00-00
The solid-state piezo-velocity sensor measures absolute vibration of bearing housings, machinery casings or structures. It uses no moving parts and can operate in any orientation. A suitable vibration-monitoring channel receives its velocity signal; correct mechanical mounting remains essential.
Use a monitoring input that supports the documented Velomitor signal, sensitivity, bias and electrical interface. This casing-velocity sensor is not a proximity probe, a Proximitor Sensor or a direct substitute for an accelerometer input with a different signal requirement.
Select a rigid mounting location and the documented adapter. Verify that the vibration of interest reaches the sensor through the machinery casing. The manufacturer warns that incorrect mounting can alter frequency response or produce signals unrelated to actual machine vibration.
Features:
- Match complete ordering options, sensing-chain configuration, mounting and target arrangement
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330500-00-00 piezo-velocity sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330500-00-00 requires comparing complete ordering options, sensing-chain configuration, mounting and target arrangement. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use a monitoring input that supports the documented Velomitor signal, sensitivity, bias and electrical interface. This casing-velocity sensor is not a proximity probe, a Proximitor Sensor or a direct substitute for an accelerometer input with a different signal requirement.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330500-00-00 piezo-velocity sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330500-00-00 piezo-velocity sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5x2.5x7.2cm
-
Shipping weight0.16 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330500-00-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 330500-00-00 measure?
The solid-state piezo-velocity sensor measures absolute vibration of bearing housings, machinery casings or structures. It uses no moving parts and can operate in any orientation. A suitable vibration-monitoring channel receives its velocity signal; correct mechanical mounting remains essential. -
How are mounting and approval options selected?
Match the complete mounting-adapter and approval suffixes to the installation and supplied marking. The sensor measures casing motion, so the machine must transmit the vibration of interest to the chosen mounting location. Unresolved options require confirmation before replacement. -
Which monitoring input is compatible?
Use a monitoring input that supports the documented Velomitor signal, sensitivity, bias and electrical interface. This casing-velocity sensor is not a proximity probe, a Proximitor Sensor or a direct substitute for an accelerometer input with a different signal requirement. -
Where can this Velomitor sensor be applied?
A compatible monitoring channel receives the casing-velocity signal. The manufacturer requires attention to mounting and mechanical signal transmission so the reading represents the vibration of interest. -
Why is the mounting position important?
Select a rigid mounting location and the documented adapter. Verify that the vibration of interest reaches the sensor through the machinery casing. The manufacturer warns that incorrect mounting can alter frequency response or produce signals unrelated to actual machine vibration. -
Does the sensor need a particular gravity orientation?
No. The manufacturer describes a solid-state design with no moving parts that can operate in any orientation. This does not remove the need to select the correct measurement direction and rigid mounting arrangement. -
Can its velocity signal simply be integrated for shaft displacement?
The manufacturer cautions that integrating velocity to displacement amplifies electrical noise. The result is a casing-related measurement, not a direct non-contact shaft-to-bearing displacement measurement; verify that the intended analysis and signal quality are suitable.
READY TO VERIFY YOUR PART?
Get a 330500-00-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
