PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Velomitor sensor interconnect cable
Bently Nevada 106765-06 is a Velomitor XA interconnect cable. The interconnect cable joins a Velomitor XA sensor to its field connection. Its armored construction and splash-resistant boot support the documented sensor installation in moist environments. It is a connection assembly rather than a separate vibration sensor or signal conditioner.
The supplied suffix is not confirmed against the published two-digit, one-to-twenty-five-metre ordering sequence. Preserve the complete supplied identity and verify the actual cable assembly. Match its termination and protective boot to the installed Velomitor XA connection before replacement.
The supplied suffix is not confirmed against the published two-digit, one-to-twenty-five-metre ordering sequence. Preserve the complete supplied identity and verify the actual cable assembly. Match its termination and protective boot to the installed Velomitor XA connection before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 106765-06 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 106765-06
-
Product Model106765-06
-
Product ParametersVelomitor sensor interconnect cable
-
In stock6 units
-
ManufacturerBently Nevada
-
Compatible sensor family330525 Velomitor XA
-
Conductor cross-section0.382 mm2 (22 AWG)
-
Cable armorStainless steel
-
Protective assemblySplash-resistant boot with clamps
-
Lead identificationA: white; B: black; SHLD: green
-
Termination protectionClear shrink tubing
-
Overall-length tolerance+/-200 mm, as shown in the cable drawing
View all additional
Alternative Names
106765 06
106765-06 Velomitor XA interconnect cable
Bently Nevada 106765-06
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
VELOMITOR SENSOR INTERCONNECT CABLE
Integrating 106765-06
The interconnect cable joins a Velomitor XA sensor to its field connection. Its armored construction and splash-resistant boot support the documented sensor installation in moist environments. It is a connection assembly rather than a separate vibration sensor or signal conditioner.
Use the cable with the documented 330525 Velomitor XA connection. Where the installation transitions to bulk field wiring, a 106769 terminal housing accommodates up to two XA sensor cables. A generic cable or similar connector does not establish equivalent environmental protection.
Keep the boot and clamps correctly fitted, preserve the A, B and shield identification, and follow Velomitor guide 100076. The documented arrangement uses a 1.5 in minimum cable bend radius. Do not transfer the sensor temperature limit or excitation voltage into an unverified cable rating.
Features:
- Match sensor connection, actual cable length, conductor identification and protective boot
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 106765-06 Velomitor XA interconnect cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 106765-06 requires comparing sensor connection, actual cable length, conductor identification and protective boot. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the cable with the documented 330525 Velomitor XA connection. Where the installation transitions to bulk field wiring, a 106769 terminal housing accommodates up to two XA sensor cables. A generic cable or similar connector does not establish equivalent environmental protection.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 106765-06 Velomitor XA interconnect cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 106765-06 Velomitor XA interconnect cable must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18x18x2cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 106765-06
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What configuration does 106765-06 identify?
The supplied suffix is not confirmed against the published two-digit, one-to-twenty-five-metre ordering sequence. Preserve the complete supplied identity and verify the actual cable assembly. Match its termination and protective boot to the installed Velomitor XA connection before replacement. -
What is the function of this cable?
The interconnect cable joins a Velomitor XA sensor to its field connection. Its armored construction and splash-resistant boot support the documented sensor installation in moist environments. It is a connection assembly rather than a separate vibration sensor or signal conditioner. -
Which Velomitor connection is it intended for?
Use the cable with the documented 330525 Velomitor XA connection. Where the installation transitions to bulk field wiring, a 106769 terminal housing accommodates up to two XA sensor cables. A generic cable or similar connector does not establish equivalent environmental protection. -
Where is the protected cable assembly used?
The cable connects the velocity sensor used on a suitable machine housing. Correct sensor placement and a compatible receiving monitor remain necessary; the cable itself does not measure vibration or correct an unsuitable mounting location. -
What should be checked during cable installation?
Keep the boot and clamps correctly fitted, preserve the A, B and shield identification, and follow Velomitor guide 100076. The documented arrangement uses a 1.5 in minimum cable bend radius. Do not transfer the sensor temperature limit or excitation voltage into an unverified cable rating. -
Can sensor excitation voltage be used as the cable voltage rating?
No. The reviewed cable drawing identifies construction and termination but does not establish a rated cable voltage. Electrical supply conditions for a connected sensor are different from the insulation rating needed for cable selection and customs classification. -
Does the interconnect length equal the complete field-wire run?
No. The catalogue lists the 106765 interconnect separately from bulk field cable 02173007. Verify both sections and their termination arrangement; a bulk field-wire allowance is not an alternative ordering length for this assembly.
READY TO VERIFY YOUR PART?
Get a 106765-06 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
