330525 Series

Interconnect Cable

Length:20 feet (6.1 meters)
Outer Diameter:8.2mm (0.32 inches)
Cable Type:Multi-conductor shielded
Jacket Material:PVC 
Minimum length: 1 metre (3.3 feet)
Maximum length: 25 metres (82 feet)

Interconnect cable

Standard ArmoredInterconnect Cable
Stainless steel armor 
overshielded 0.382 mm2 (22 AWG)
cable with a moistureresistant 
female connector atthe transducer end 
and ringlugs at the monitor end.
Temperature range -29 to121°C (-20 to 250°F)

Standard Interconnect Cables

2-conductor twisted
shielded 22AWG (0.5 mm2) cable 
with 2-socket moisture-resistant femaleconnector at one end
terminallugs at the other end 
(used withmonitors or vibration datacollectors)
Cable operating temperature is-50˚C to 120˚C
Minimum length of 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)

Velomitor Interconnect Cable

Cable Length: 
75 feet (22.86 meters)
Temperature Range: 
-29°C to 121°C (-20°F to 250°F)
Ordering Information: 
Available in 1-foot (0.3-meter)

Piezo-Velocity Sensor

Maximumlength25 meters (82 feet)
Sensitivity 3.94mV/mm/s (100 mV/in/s)±5%.
VelocityRange1270 mm/s (50 in/s) peak
TransverseSensitivityLess than 5% of sensitivity.
AmplitudeLinearity±2% to 152 mm/s (6 in/s) peak

Interconnect Cable

Product Type : Standard Interconnect Cables
Length : 17 = Minimum length, 17 ft
2-conductor twisted, 
shielded 22AWG cable with 2-socketmoisture-resistant 
femaleconnector at one end, 
terminallugs at the other end.
Used with monitors. 
Not for usewith 21128 Velocity Transducer
Housing.Minimum length: 2.0 ft (0.6 m)
Maximum length: 99 ft (30 m)

Interconnect Cable

Voltage Rating: Typically 300V AC/DC
Impedance: 50Ω or 100Ω for coaxial cables
Insulation: High-temperature thermoplastic 
Temperature Range:
Operating: -40°C to +85°C (-40°F to +185°F).
Storage: -50°C to +105°C.
Systems: Designed for Bently Nevada 3500 Series

Velomitor XA Piezo-Velocity Sensor

Product Type: Piezo-Velocity Sensor
Weight: 156 g (5.5 oz), typical
Diameter: 28 mm (1.1 in)
Height: 73.1 mm (2.88 in)
Case Material: 316L stainless steel
Operating Temperature: -55 °C to +121 °C
Shock Survivability: 5000 g peak, maximum
Relative Humidity: To 100% non-submerged
Magnetic Field: Susceptibility <51 min/s/gauss
Shock Survivability: 5000 g peak, maximum

Velomitor XA Piezo-velocity Sensor

Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
Velocity Range:1270 mm/s (50 in/s) peak
Transverse Sensitivity:Less than 5% of sensitivity
Amplitude Linearity:±2% to 152 mm/s (6 in/s) peak
BroadbandNoise Floor:0.004 mm/s (160 min/s) rms,nominal.
PowerRequirements:
DC Voltage: -22 to -30 VDC
Bias Current: 2.5 to 6.0 mA
Output BiasVoltage:-12 ± 3.0 VDC, 
Over Temperature Referenced toPin A

Velomitor XA Piezo-Velocity Sensor

Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
VelocityRange:1270 mm/s (50 in/s) peak
Transverse Sensitivity:Less than 5% of sensitivity
Amplitude Linearity:±2% to 152 mm/s (6 in/s) peak
MountingTorque:45 N-m (33 ft-lb) maximum

Interconnect Cable

3-conductor shielded 22 AWG(0.5 mm2) 
armored cable with3-socket plug at one end
terminal lugs at the other end
Minimum length of 3.0 ft (0.9 m)
maximum length of 99 ft (30 m)