PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 330904-08-15-10-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330904-08-15-10-02-05 Armored proximity probe
Bently Nevada 330904-08-15-10-02-05 is a Armored proximity probe for the 3300 XL NSv transducers. It is selected for eddy-current proximity measurement and must be matched to the documented armored integral cable, 1.0 m total system length and installed hardware. Confirm the full order identity, mechanical arrangement and commissioning record before replacement.
BEFORE YOU BUY
Confirm the complete Armored proximity probe
ACTUAL APPLICATIONS
330904-08-15-10-02-05
Armored Proximity Probe applications
Apply 330904-08-15-10-02-05 only within the documented 3300 XL NSv transducers configuration and verify all power, control and cooling interfaces before service.
-
01 · COMPRESSOR SHAFT VIBRATION
Apply the
compressor shaft vibrationUse 330904-08-15-10-02-05 for compressor shaft vibration only after confirming the documented 3300 XL NSv transducers hardware, interfaces and operating conditions. -
02 · ARMORED PROBE ROUTING
Document the
armored probe routingRecord armored probe routing, connector orientation, adjacent assemblies and controlled settings before removing the installed Armored proximity probe. -
03 · OPERATING-GAP VALIDATION
Verify the
operating-gap validationComplete operating-gap validation with qualified personnel, review diagnostics and retain the final acceptance record before service release.
Technical specifications for 330904-08-15-10-02-05
-
Product Model330904-08-15-10-02-05
-
Product ParametersArmored proximity probe
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerBently Nevada
-
Component ClassArmored proximity probe
-
Product Family3300 XL NSv transducers
-
Primary FunctionEddy-current proximity measurement
-
Electrical DesignM8 × 1 metric case thread
-
Signal or Power PathArmored integral cable
-
System InterfaceMiniature ClickLoc coaxial connector
-
Mounting Arrangement1.0 m total system length
-
Configuration ReferenceTight-clearance compressor mounting
-
Replacement ControlRecord wiring and companion hardware
-
Commissioning CheckVerify matched system length and gap
View all additional
Alternative Names
330904 NSv M8 probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 330904-08-15-10-02-05 to the installed 3300 XL NSv system
Bently Nevada 330904-08-15-10-02-05 is an armored, standard-mount M8 x 1 probe for the 3300 XL NSv Proximity Transducer System. It is intended for centrifugal air compressors, refrigeration compressors, process-gas compressors and other rotating machines where small targets, tight counterbores or restricted sideview limit standard 5 mm and 8 mm probes.
The order code specifies a 0.8-inch unthreaded length, 1.5-inch overall case length, 1.0-meter total probe length, miniature coaxial ClickLoc connector with standard cable and Multiple Approvals. Match these options to the installed mounting geometry and hazardous-area requirements.
Use the probe only with the documented NSv extension cable and 3300 XL NSv Proximitor Sensor. Maintain the correct 5 m or 7 m system length, protect the armored cable, observe the 25.4 mm bend radius and verify the 1.0 mm initial gap before commissioning.
Features:
- Exact identity: 330904-08-15-10-02-05
- M8 x 1 armored standard-mount probe
- 1.0 m probe in matched NSv system
The Bently Nevada 330904-08-15-10-02-05 requires documented system integration using Datasheet 147385 Rev. R before energising the monitor channel.
REPLACEMENT CONTROL
Verify the complete 330904-08-15-10-02-05 configuration before replacement
Replace 330904-08-15-10-02-05 only after confirming the full 330904-AA-BB-CC-DD-EE order identity: 0.8-inch unthreaded length, 1.5-inch overall case length, 1.0-meter total length, connector option 02 and approval option 05.
Photograph the M8 x 1 mounting position, armor routing, ClickLoc connection, extension cable, Proximitor Sensor and monitor channel. The NSv system must retain the documented 5 m or 7 m electrical length and compatible target material.
After installation, set the initial gap near 1.0 mm, confirm stable output across the required operating range, verify vibration or position scaling and record monitor diagnostics before returning the machine protection channel to service.
Features:
- Match all five order-code options
- Confirm NSv system electrical length
- Record gap, scaling and diagnostics
The Bently Nevada 330904-08-15-10-02-05 requires documented replacement verification using Datasheet 147385 Rev. R before energising the monitor channel.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for 330904-08-15-10-02-05
- Bently Nevada product-family references checked
- Exact identity required before installation
Documentation for Bently Nevada 330904-08-15-10-02-05 must match the installed equipment; confirm manual applicability and quoted accessories before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 4 × 4 cm
-
Shipping weight0.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330904-08-15-10-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which compressor shaft vibration conditions should engineering confirm for 330904-08-15-10-02-05?
Confirm the exact 330904-08-15-10-02-05 identity, miniature clickloc coaxial connector, 1.0 m total system length and the controlled 3300 XL NSv transducers configuration before work. -
What evidence helps diagnose a armored probe routing issue involving 330904-08-15-10-02-05?
Record status indications, wiring references, connector positions, measured values and the event sequence associated with armored probe routing. -
How should maintenance prepare to replace the Armored proximity probe 330904-08-15-10-02-05?
For 330904-08-15-10-02-05, isolate applicable energy, photograph the installation, label each connection and compare the complete article, revision and companion hardware. -
Which acceptance step closes operating-gap validation for 330904-08-15-10-02-05?
Perform verify matched system length and gap, review diagnostics and save the result with the maintenance record before returning the equipment to service. -
What identity details should a distributor quote for 330904-08-15-10-02-05?
The quotation should state Bently Nevada, exact model 330904-08-15-10-02-05, product class, revision or suffix, condition, included accessories and document availability. -
How can a reseller prevent a wrong 330904-08-15-10-02-05 shipment?
For 330904-08-15-10-02-05, compare label photographs, the complete part number, mechanical format, interfaces and companion system before confirming supply. -
Which commercial terms belong on a quotation for 330904-08-15-10-02-05?
For 330904-08-15-10-02-05, list price, stock status, dispatch time, packed size, shipping weight, HS reference, origin and 12 months from AMIKON. -
What records should accompany delivery of 330904 NSv M8 probe?
For 330904 NSv M8 probe, provide the packing list, traceable model identity, condition record, tracking details and the specific PDFs linked on the product page.
READY TO VERIFY YOUR PART?
Get a 330904-08-15-10-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
