PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500/42E 285691-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
ENCORE vibration monitoring module
Bently Nevada 3500/42E 285691-01 is a ENCORE vibration monitoring module. The monitor processes proximity and seismic signals for machinery measurements and alarms. Available channels depend on the ENCORE arrangement. An upgraded 3300 rack retains existing rear I/O, while a dedicated ENCORE system supports four channels with its own I/O modules.
The manufacturer identifies this spare number as the Proximitor/Seismic front monitor. Match the rack-upgrade or dedicated-system configuration, transducer sensitivity and rear I/O. The ENCORE designation does not by itself prove interchangeability with an ordinary 3500 rack or a 3500/42M module.
The manufacturer identifies this spare number as the Proximitor/Seismic front monitor. Match the rack-upgrade or dedicated-system configuration, transducer sensitivity and rear I/O. The ENCORE designation does not by itself prove interchangeability with an ordinary 3500 rack or a 3500/42M module.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500 ENCORE monitoring system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · RACK MIGRATION
Retaining an existing 3300 installation
The documented ENCORE rack-upgrade arrangement keeps the original 3300 chassis, rear I/O and relays and uses two monitor channels. The front monitor is configured for that limited-channel arrangement. -
02 · PAIRED MEASUREMENTS
Configuring two measurement functions
In a dedicated ENCORE system, the front monitor processes channels in pairs. One pair may monitor radial vibration while the other performs a different supported function; rear I/O and transducers must match. -
03 · MACHINE ALARMS
Comparing measurements with selected limits
The complete ENCORE monitoring chain provides configured values for operations and maintenance and compares them with Alert and Danger settings. The correct relay arrangement depends on the rack configuration.
Technical specifications for 3500/42E 285691-01
-
Product Model3500/42E 285691-01
-
Product ParametersENCORE vibration monitoring module
-
In stock4 units
-
ManufacturerBently Nevada
-
Input typesProximity, velocity or acceleration transducers
-
Available channel arrangementFour in ENCORE System; two in a 3300 rack upgrade
-
Input impedance for proximity and acceleration10 kohm
-
Typical power consumption6.8 W
-
Configuration software minimum3500/01 version 4.6
-
Channel programmingPairs 1-2 and 3-4, up to two measurement functions
-
Buffered transducer connectionsOne short-circuit-protected front coaxial connector per channel
-
Buffered output impedance499 ohm
-
Transducer supply-24 Vdc
-
Recorder outputsIndividual 4-20 mA proportional to configured full scale
-
Recorder load range0 to 600 ohm
-
Recorder update period100 ms or less
-
Operating temperature-20 to +65 deg C
-
Storage temperature-40 to +85 deg C
-
Relative humidity95%, noncondensing
View all additional
Alternative Names
3500/42E 285691 01
3500/42E 285691-01 ENCORE vibration monitoring module
Bently Nevada 3500/42E 285691-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ENCORE VIBRATION MONITORING MODULE
Integrating 3500/42E 285691-01
The monitor processes proximity and seismic signals for machinery measurements and alarms. Available channels depend on the ENCORE arrangement. An upgraded 3300 rack retains existing rear I/O, while a dedicated ENCORE system supports four channels with its own I/O modules.
A 3300 rack upgrade retains its SIM or SIRM and uses two channels with existing relays. A dedicated 3500 ENCORE System uses ENCORE I/O for four channels and a programmable relay module. These configurations must not be treated as an unrestricted ordinary-3500 replacement.
Confirm the rack arrangement, matching rear I/O and sensor sensitivity before loading the configuration. The reference requires 3500/01 software version 4.6 or later. Existing 3300 hazardous-area approval must match the retrofit approval; an unapproved rack invalidates that retrofit approval.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/42E 285691-01 ENCORE vibration monitoring module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/42E 285691-01 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
A 3300 rack upgrade retains its SIM or SIRM and uses two channels with existing relays. A dedicated 3500 ENCORE System uses ENCORE I/O for four channels and a programmable relay module. These configurations must not be treated as an unrestricted ordinary-3500 replacement.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/42E 285691-01 ENCORE vibration monitoring module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/42E 285691-01 ENCORE vibration monitoring module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.5x19x22.8cm
-
Shipping weight1.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/42E 285691-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 3500/42E 285691-01 identified?
The manufacturer identifies this spare number as the Proximitor/Seismic front monitor. Match the rack-upgrade or dedicated-system configuration, transducer sensitivity and rear I/O. The ENCORE designation does not by itself prove interchangeability with an ordinary 3500 rack or a 3500/42M module. -
What is the function of this component?
The monitor processes proximity and seismic signals for machinery measurements and alarms. Available channels depend on the ENCORE arrangement. An upgraded 3300 rack retains existing rear I/O, while a dedicated ENCORE system supports four channels with its own I/O modules. -
Which equipment and settings must match?
A 3300 rack upgrade retains its SIM or SIRM and uses two channels with existing relays. A dedicated 3500 ENCORE System uses ENCORE I/O for four channels and a programmable relay module. These configurations must not be treated as an unrestricted ordinary-3500 replacement. -
What application does it support?
The documented ENCORE rack-upgrade arrangement keeps the original 3300 chassis, rear I/O and relays and uses two monitor channels. The front monitor is configured for that limited-channel arrangement. -
What should be checked during installation?
Confirm the rack arrangement, matching rear I/O and sensor sensitivity before loading the configuration. The reference requires 3500/01 software version 4.6 or later. Existing 3300 hazardous-area approval must match the retrofit approval; an unapproved rack invalidates that retrofit approval. -
Are all four channels available when upgrading a 3300 rack?
No. The manufacturer limits that arrangement to two channels using existing 3300 I/O and relays. Four channels require the dedicated ENCORE System rack and I/O arrangement. -
Is 289837-01 the same assembly as 285691-01?
No. The official spares table identifies 285691-01 as the front Proximitor/Seismic monitor and 289837-01 as its rear I/O module. They have different roles and separate physical specifications.
READY TO VERIFY YOUR PART?
Get a 3500/42E 285691-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
