PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- PWA123447-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Dynamic data sampler board
Bently Nevada PWA123447-01 is a TDXnet sampler circuit board. The sampler circuit board is a spare for the TDXnet communications processor. The system allocates two dynamic channels per sampler card. It is not the complete processor, power supply or rack monitor, and its installation must match the host configuration.
The historical manufacturer spare list identifies 123447-01 as the TDXnet sampler circuit board. This record retains the existing PWA prefix. The reference does not establish a delivered board revision or independent supply rating; verify the installed board marking and controlled replacement instructions.
The historical manufacturer spare list identifies 123447-01 as the TDXnet sampler circuit board. This record retains the existing PWA prefix. The reference does not establish a delivered board revision or independent supply rating; verify the installed board marking and controlled replacement instructions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for TDXnet communications processor
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · DYNAMIC DATA
Waveform channels in TDXnet
Each documented sampler card adds two dynamic channels to the configured TDXnet processor. The complete processor manages data acquisition and communication. -
02 · STARTUP AND COASTDOWN
Capturing changing machinery behaviour
The TDXnet family collects transient and steady-state data from connected channels. Available information depends on the sampler population, compatible monitoring system and software configuration. -
03 · PROCESSOR MAINTENANCE
Restoring an identified sampler position
The board is a separately listed processor spare. Verify the installed assembly and slot configuration without treating the card as a complete machinery protection system.
Technical specifications for PWA123447-01
-
Product ModelPWA123447-01
-
Spare Model123447-01
-
Product ParametersDynamic data sampler board
-
In stock3 units
-
ManufacturerBently Nevada
-
Published spare functionTDXnet sampler circuit board
-
Dynamic input allocationTwo channels per sampler card
-
Host platformTDXnet communications processor
View all additional
Alternative Names
PWA123447 01
PWA123447-01 TDXnet sampler circuit board
Bently Nevada PWA123447-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DYNAMIC DATA SAMPLER BOARD
Integrating PWA123447-01
The sampler circuit board is a spare for the TDXnet communications processor. The system allocates two dynamic channels per sampler card. It is not the complete processor, power supply or rack monitor, and its installation must match the host configuration.
The TDXnet ordering table allocates two dynamic channels to each sampler card, with up to twelve cards in the complete processor. The spare listing does not establish unconditional replacement in TDIX, DDM or a 3500 rack module.
Match the installed sampler position and host configuration using the controlled TDXnet instructions. Do not apply the complete processor AC supply or 89 W power rating directly to the board. Retain the intended channel assignment when replacing a sampler.
Features:
- Match exact assembly, interface generation, connection and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The PWA123447-01 TDXnet sampler circuit board requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of PWA123447-01 requires comparing exact assembly, interface generation, connection and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The TDXnet ordering table allocates two dynamic channels to each sampler card, with up to twelve cards in the complete processor. The spare listing does not establish unconditional replacement in TDIX, DDM or a 3500 rack module.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The PWA123447-01 TDXnet sampler circuit board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the PWA123447-01 TDXnet sampler circuit board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size19x11x1.8cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about PWA123447-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is PWA123447-01 identified?
The historical manufacturer spare list identifies 123447-01 as the TDXnet sampler circuit board. This record retains the existing PWA prefix. The reference does not establish a delivered board revision or independent supply rating; verify the installed board marking and controlled replacement instructions. -
What does this component do?
The sampler circuit board is a spare for the TDXnet communications processor. The system allocates two dynamic channels per sampler card. It is not the complete processor, power supply or rack monitor, and its installation must match the host configuration. -
Which equipment and interfaces must match?
The TDXnet ordering table allocates two dynamic channels to each sampler card, with up to twelve cards in the complete processor. The spare listing does not establish unconditional replacement in TDIX, DDM or a 3500 rack module. -
Where is this product used?
Each documented sampler card adds two dynamic channels to the configured TDXnet processor. The complete processor manages data acquisition and communication. -
What matters when installing this component?
Match the installed sampler position and host configuration using the controlled TDXnet instructions. Do not apply the complete processor AC supply or 89 W power rating directly to the board. Retain the intended channel assignment when replacing a sampler. -
Can the processor mains voltage be applied to this board?
No. The historical AC supply specification describes the complete TDXnet processor, not an independent sampler-board input. Obtain the controlled board and host instructions. -
Does one sampler card provide all twenty-four dynamic channels?
No. One sampler card represents two dynamic channels. The documented twenty-four-channel configuration requires twelve sampler cards in the complete processor.
READY TO VERIFY YOUR PART?
Get a PWA123447-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
