PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 60M100-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Wind turbine condition monitor
Bently Nevada 60M100-00 is a wind turbine condition monitor. The monitor processes vibration and operating information from a wind-turbine machine train. Configured channels support bearing, gearbox and generator condition assessment. It provides monitoring data and alarms, but the manufacturer explicitly states that it does not replace hardwired safety systems.
The 60M100-00 order identifies the wind condition monitor with the Standard approval option. It is the monitor-only order, not a complete sensor or software kit. Match the installed sensors, network setup and host software before replacement.
The 60M100-00 order identifies the wind condition monitor with the Standard approval option. It is the monitor-only order, not a complete sensor or software kit. Match the installed sensors, network setup and host software before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 60M100-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
02 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
03 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production.
Technical specifications for 60M100-00
-
Product Model60M100-00
-
Product ParametersWind turbine condition monitor
-
In stock7 units
-
ManufacturerBently Nevada
-
Dynamic channelsUp to 12
-
Keyphasor inputsTwo
-
Power input18-36 Vdc
-
Maximum current1.7 A
-
A/D conversion24-bit nominal sigma-delta
-
Signal bandwidth0-40 kHz
-
Channel 1-10 sensor interface2-wire ICP-type accelerometers
-
Channel 11-12 sensor interface2-wire ICP or 3-wire proximity
-
Ethernet interfacesTwo independent 10/100 BaseT ports
-
Modbus TCP roleServer and client supported
-
Buffered outputsTwo 15-pin D-sub connections
-
Output impedance550 ohm
-
MountingDIN rail
-
Operating temperature-40 to +70 deg C
-
Storage temperature-45 to +85 deg C
View all additional
Alternative Names
60M100 00
60M100-00 wind turbine condition monitor
Bently Nevada 60M100-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
WIND TURBINE CONDITION MONITOR
Integrating 60M100-00
The monitor processes vibration and operating information from a wind-turbine machine train. Configured channels support bearing, gearbox and generator condition assessment. It provides monitoring data and alarms, but the manufacturer explicitly states that it does not replace hardwired safety systems.
Channels 1-10 use 2-wire ICP accelerometers; channels 11-12 also support the documented 3-wire proximity interface. Match the two speed inputs separately. The listed Adapt.Wind software requirement is version 1.9 or newer; confirm current host integration for the installed system.
Mount the unit on the specified DIN rail and supply it within the documented DC range. Separate the network DHCP port from the local static-IP port. Verify sensor channel type, speed reference and machine configuration before relying on condition trends.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 60M100-00 wind turbine condition monitor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 60M100-00 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Channels 1-10 use 2-wire ICP accelerometers; channels 11-12 also support the documented 3-wire proximity interface. Match the two speed inputs separately. The listed Adapt.Wind software requirement is version 1.9 or newer; confirm current host integration for the installed system.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 60M100-00 wind turbine condition monitor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 60M100-00 wind turbine condition monitor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2x19x12.8cm
-
Shipping weight1.3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 60M100-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 60M100-00 identified?
The 60M100-00 order identifies the wind condition monitor with the Standard approval option. It is the monitor-only order, not a complete sensor or software kit. Match the installed sensors, network setup and host software before replacement. -
What is the function of this component?
The monitor processes vibration and operating information from a wind-turbine machine train. Configured channels support bearing, gearbox and generator condition assessment. It provides monitoring data and alarms, but the manufacturer explicitly states that it does not replace hardwired safety systems. -
Which installed equipment must be matched?
Channels 1-10 use 2-wire ICP accelerometers; channels 11-12 also support the documented 3-wire proximity interface. Match the two speed inputs separately. The listed Adapt.Wind software requirement is version 1.9 or newer; confirm current host integration for the installed system. -
Where is this component used?
The manufacturer identifies main and generator bearings as monitoring targets. Correctly located and configured sensors supply the signals used to assess changing machine behaviour. -
What must be checked during installation?
Mount the unit on the specified DIN rail and supply it within the documented DC range. Separate the network DHCP port from the local static-IP port. Verify sensor channel type, speed reference and machine configuration before relying on condition trends. -
Can this monitor replace a hardwired turbine safety system?
No. The manufacturer explicitly excludes that use. It is a condition-monitoring system and does not replace standard operational data acquisition or hardwired safety systems. -
Are all twelve channels configured only for accelerometers?
No. Channels 1-10 use the documented 2-wire ICP interface. Channels 11 and 12 may instead be configured for the documented 3-wire proximity probes; the two Keyphasor inputs are separate.
READY TO VERIFY YOUR PART?
Get a 60M100-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
