PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Rack I/O module cover
The manufacturer lists the I/O module cover in the full-height blank monitor cover kit. Its fastening screws are ordered separately. The cover must be distinguished from the front blank panel, and no electrical monitoring function is assigned to this mechanical component.
The official spare table identifies 128031-01; the complete listing 128031-01D is retained unchanged. Additional markings or suffixes are not verified as equivalent order numbers or hardware revisions. Only the identified component facts are stated here.
The official spare table identifies 128031-01; the complete listing 128031-01D is retained unchanged. Additional markings or suffixes are not verified as equivalent order numbers or hardware revisions. Only the identified component facts are stated here.
BEFORE YOU BUY
Confirm the complete installed configuration
Technical specifications for 128031-01D
-
Product Model128031-01D
-
Product ParametersRack I/O module cover
-
In stock7 units
-
ManufacturerBently Nevada
-
Documented component roleI/O module cover
-
Cover kit associationFull-height blank monitor cover kit 130768-01
-
Separate fastening part04310251 screws
-
Required screw quantityTwo for the I/O module cover
View all additional
Alternative Names
Rack I/O module cover
3500 rack cover hardware
128031 01D
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
RACK I/O MODULE COVER
Integrating 128031-01D
Verified component scope only: The manufacturer lists the I/O module cover in the full-height blank monitor cover kit. Its fastening screws are ordered separately. The cover must be distinguished from the front blank panel, and no electrical monitoring function is assigned to this mechanical component.
The 130768-01 full-height blank monitor cover kit lists the 130944-01 front panel, the 128031-01 I/O cover and two 04310251 screws. A kit association does not establish that the front panel and I/O cover are interchangeable.
The manufacturer directs buyers to order 04310251 screws for the I/O module cover and lists a quantity of two. Check the actual covered position and use rack installation manual 129766-01 for the controlled fitting procedure.
Features:
- Match documented spare number, panel position, height and supplied fastening hardware
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 128031-01D listed rack spare requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 128031-01D requires comparing documented spare number, panel position, height and supplied fastening hardware. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The 130768-01 full-height blank monitor cover kit lists the 130944-01 front panel, the 128031-01 I/O cover and two 04310251 screws. A kit association does not establish that the front panel and I/O cover are interchangeable.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 128031-01D listed rack spare requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 128031-01D listed rack spare must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24x2.3x1.8cm
-
Shipping weight0.04 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 128031-01D
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is officially identified in 128031-01D?
The official spare table identifies 128031-01; the complete listing 128031-01D is retained unchanged. Additional markings or suffixes are not verified as equivalent order numbers or hardware revisions. Only the identified component facts are stated here. -
What does the documented component do?
The manufacturer lists the I/O module cover in the full-height blank monitor cover kit. Its fastening screws are ordered separately. The cover must be distinguished from the front blank panel, and no electrical monitoring function is assigned to this mechanical component. -
What must match the existing rack hardware?
The 130768-01 full-height blank monitor cover kit lists the 130944-01 front panel, the 128031-01 I/O cover and two 04310251 screws. A kit association does not establish that the front panel and I/O cover are interchangeable. -
What is required before mechanical installation?
The manufacturer directs buyers to order 04310251 screws for the I/O module cover and lists a quantity of two. Check the actual covered position and use rack installation manual 129766-01 for the controlled fitting procedure. -
Which screws are listed for the I/O module cover?
The official spare table specifies 04310251 and lists two screws for the I/O module cover. They are ordered separately. -
Is this the same component as the blank front panel?
No. 128031-01 is the I/O module cover; 130944-01 is the full-height blank front panel. Both appear in the kit but serve distinct cover positions.
READY TO VERIFY YOUR PART?
Get a 128031-01D quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
