PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/46M 140734-06
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Hydro machinery monitoring module
Manufacturer documentation describes the 3500/46M family. The documented family supports hydro-machine measurements using appropriately selected transducers and I/O. It conditions vibration, position and pressure information for programmed alarm comparison. The required function, including air gap or hydro radial vibration, must be verified against the actual installed configuration.
This listing preserves 3500/46M 140734-06. The official reference confirms the 3500/46M family, but does not establish the additional identifier as a supplied assembly, option or revision. The following family information must not be treated as verified board-specific specifications.
This listing preserves 3500/46M 140734-06. The official reference confirms the 3500/46M family, but does not establish the additional identifier as a supplied assembly, option or revision. The following family information must not be treated as verified board-specific specifications.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500/46M monitoring family
These are manufacturer-documented family applications. The additional identifier in this listing has no verified assembly mapping; no board-specific capabilities or supplied options are inferred.
-
01 · HYDRO SHAFT MOTION
Radial vibration and shaft-gap monitoring
The hydro radial-vibration function combines gap movement with NX amplitude for the documented shear-pin-related measurement. -
02 · GENERATOR CLEARANCE
Hydro air-gap channels
The documented air-gap function uses the appropriate transducer and configured monitoring interface. -
03 · HYDRO PRESSURE
Configured dynamic-pressure measurements
Supported hydro dynamic-pressure functionality requires the corresponding sensor, I/O and software arrangement; it is not supplied by every possible configuration.
Technical specifications for 3500/46M 140734-06
-
Product Model3500/46M 140734-06
-
Spare Model140734-06
-
Product ParametersHydro machinery monitoring module
-
In stock10 units
-
ManufacturerBently Nevada
-
Family monitoring channelsFour
-
Family input categoriesProximity, seismic, dynamic pressure and air gap; with matching I/O
-
Family measured quantitiesVibration, position and static or dynamic pressure
-
Family channel programmingChannel pairs
-
Family radial-vibration functionCombines shaft gap movement with NX amplitude
-
Family configuration software3500 Rack Configuration Software
View all additional
Alternative Names
3500/46M 140734 06
3500/46M 140734-06 hydro machinery monitor
Bently Nevada 3500/46M 140734-06
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
HYDRO MACHINERY MONITORING MODULE
Integrating 3500/46M 140734-06
The documented family supports hydro-machine measurements using appropriately selected transducers and I/O. It conditions vibration, position and pressure information for programmed alarm comparison. The required function, including air gap or hydro radial vibration, must be verified against the actual installed configuration.
Match the selected hydro function to its specified transducer, I/O, software and firmware requirements. A listed monitor family does not prove that all multimode hardware or every measurement option is included in the supplied item.
Before installation, identify the complete fitted assembly and its selected I/O. Follow the controlled manual for that configuration and preserve the correct sensor and field-circuit connections. The unconfirmed additional identifier is not an installation instruction or proof of compatibility.
Features:
- Match complete assembly identity, fitted I/O, selected measurements and field connections
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/46M 140734-06 hydro machinery monitor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/46M 140734-06 requires comparing complete assembly identity, fitted I/O, selected measurements and field connections. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Match the selected hydro function to its specified transducer, I/O, software and firmware requirements. A listed monitor family does not prove that all multimode hardware or every measurement option is included in the supplied item.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/46M 140734-06 hydro machinery monitor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/46M 140734-06 hydro machinery monitor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.6x25.8x24cm
-
Shipping weight0.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/46M 140734-06
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the full identifier 3500/46M 140734-06 establish?
This listing preserves 3500/46M 140734-06. The official reference confirms the 3500/46M family, but does not establish the additional identifier as a supplied assembly, option or revision. The following family information must not be treated as verified board-specific specifications. -
What does the documented 3500/46M family do?
The documented family supports hydro-machine measurements using appropriately selected transducers and I/O. It conditions vibration, position and pressure information for programmed alarm comparison. The required function, including air gap or hydro radial vibration, must be verified against the actual installed configuration. -
Which inputs and system components must be compatible?
Match the selected hydro function to its specified transducer, I/O, software and firmware requirements. A listed monitor family does not prove that all multimode hardware or every measurement option is included in the supplied item. -
Where is this monitoring family used?
The hydro radial-vibration function combines gap movement with NX amplitude for the documented shear-pin-related measurement. -
What is required before installation of this listed item?
Before installation, identify the complete fitted assembly and its selected I/O. Follow the controlled manual for that configuration and preserve the correct sensor and field-circuit connections. The unconfirmed additional identifier is not an installation instruction or proof of compatibility. -
Does the family name prove that multimode operation is installed?
No. The manufacturer lists separate functions and configuration requirements. Confirm the actual I/O, software and firmware for the required hydro function before assuming that multimode operation is available.
READY TO VERIFY YOUR PART?
Get a 3500/46M 140734-06 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
