PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/53 133388-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Electronic overspeed detection module
Bently Nevada 3500/53 133388-01 is a overspeed detection module. The module is designed for use within an electronic overspeed-protection system. Multiple modules provide the documented voting arrangement rather than treating a single channel as a complete redundant system. The manufacturer requires redundant power supplies in the supporting 3500 rack.
The historical spare table identifies 133388-01 as the 3500/53 Overspeed Detection Module. This differs from the 133388-02 tachometer spare. Confirm the installed I/O, voting arrangement and software requirements; the part number does not establish a delivered safety certificate or firmware revision.
The historical spare table identifies 133388-01 as the 3500/53 Overspeed Detection Module. This differs from the 133388-02 tachometer spare. Confirm the installed I/O, voting arrangement and software requirements; the part number does not establish a delivered safety certificate or firmware revision.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500/53 overspeed detection system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · OVERSPEED DETECTION
Speed protection measurement channels
The manufacturer designs this family for use within overspeed-protection systems. Each module receives a compatible speed signal; the complete redundant arrangement determines the protection function. -
02 · REDUNDANT VOTING
Multi-module protection arrangements
The documented modules can be combined for 2-out-of-2 or recommended 2-out-of-3 voting. A single spare does not supply the complete voting installation. -
03 · PROTECTION MAINTENANCE
Matched front and rear replacement
Maintenance requires the correct front overspeed module and rear I/O assembly. Preserve the rack power redundancy and approved protection configuration while replacing the identified component.
Technical specifications for 3500/53 133388-01
-
Product Model3500/53 133388-01
-
Spare Model133388-01
-
Product ParametersElectronic overspeed detection module
-
In stock1 unit
-
ManufacturerBently Nevada
-
Input channelsOne per module
-
Input signal range+10 to -24 V
-
Input impedance20 kohm
-
Typical power consumption8 W
-
Transducer supply-24 Vdc, 40 mA maximum
-
Buffered output impedance550 ohm
-
Recorder output4-20 mA proportional to speed full scale
-
Recorder load0-600 ohm
-
Maximum input frequency20 kHz
-
Events per revolution1-255
-
Maximum speed full scale99,999 rpm
-
Alarm delayLess than 30 ms above 300 Hz
-
Operating temperature-30 to +65 deg C
-
Storage temperature-40 to +85 deg C
-
Rack power requirementRedundant power supplies
View all additional
Alternative Names
3500/53 133388 01
3500/53 133388-01 overspeed detection module
Bently Nevada 3500/53 133388-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ELECTRONIC OVERSPEED DETECTION MODULE
Integrating 3500/53 133388-01
The module is designed for use within an electronic overspeed-protection system. Multiple modules provide the documented voting arrangement rather than treating a single channel as a complete redundant system. The manufacturer requires redundant power supplies in the supporting 3500 rack.
The source documents 2-out-of-2 or, preferably, 2-out-of-3 voting with redundant rack supplies. Its minimum versions are 3500/20 firmware G, 3500/01 software 2.00, 3500/02 software 2.03 and 3500/03 software 1.13. Verify the actual installed protection configuration.
Use the matched front module and rear I/O in corresponding full-height rack positions, following manual 134939 and approved plant protection procedures. Retain redundant supplies and the required voting architecture. A parts replacement is not, by itself, validation of the complete overspeed-protection function.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/53 133388-01 overspeed detection module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/53 133388-01 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The source documents 2-out-of-2 or, preferably, 2-out-of-3 voting with redundant rack supplies. Its minimum versions are 3500/20 firmware G, 3500/01 software 2.00, 3500/02 software 2.03 and 3500/03 software 1.13. Verify the actual installed protection configuration.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/53 133388-01 overspeed detection module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/53 133388-01 overspeed detection module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5x25.5x24cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/53 133388-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 3500/53 133388-01 identified?
The historical spare table identifies 133388-01 as the 3500/53 Overspeed Detection Module. This differs from the 133388-02 tachometer spare. Confirm the installed I/O, voting arrangement and software requirements; the part number does not establish a delivered safety certificate or firmware revision. -
What is the function of this component?
The module is designed for use within an electronic overspeed-protection system. Multiple modules provide the documented voting arrangement rather than treating a single channel as a complete redundant system. The manufacturer requires redundant power supplies in the supporting 3500 rack. -
Which installed equipment must be matched?
The source documents 2-out-of-2 or, preferably, 2-out-of-3 voting with redundant rack supplies. Its minimum versions are 3500/20 firmware G, 3500/01 software 2.00, 3500/02 software 2.03 and 3500/03 software 1.13. Verify the actual installed protection configuration. -
Where is this component used?
The manufacturer designs this family for use within overspeed-protection systems. Each module receives a compatible speed signal; the complete redundant arrangement determines the protection function. -
What must be checked during installation?
Use the matched front module and rear I/O in corresponding full-height rack positions, following manual 134939 and approved plant protection procedures. Retain redundant supplies and the required voting architecture. A parts replacement is not, by itself, validation of the complete overspeed-protection function. -
Are redundant rack power supplies optional for this system?
No. The historical manufacturer specification expressly requires a 3500 rack with redundant power supplies for the Overspeed Detection System. -
Does the peak-speed value have its own alarm?
The historical specification identifies peak speed as a display-only value without alarming. Configured speed Alert and Danger settings are separate from the stored peak-speed indication.
READY TO VERIFY YOUR PART?
Get a 3500/53 133388-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
