PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/64M 176449-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3500/64M 176449-05 dynamic pressure monitor
Bently Nevada 3500/64M 176449-05 is a dynamic pressure monitor documented for 3500 machinery protection system. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete dynamic pressure monitor
ACTUAL APPLICATIONS
Application context for 3500/64M 176449-05
Official manufacturer documentation supports these system uses when the complete 3500 machinery protection system configuration is verified.
-
01 · POWER GENERATION
Gas turbine combustion monitoring panels
Combustion Pressure SystemsCombustor pressure pulsation channelsFuel manifold pressure alarming -
02 · OIL & GAS
Reciprocating compressor process skids
Compressor Protection SystemsCylinder pressure trend monitoringSuction pulsation alarm processing -
03 · CHEMICAL PROCESSING
Reactor vapor and gas compression units
Process Pressure SystemsReactor vapor pressure monitoringProcess compressor discharge supervision
Technical specifications for 3500/64M 176449-05
-
Product Model3500/64M 176449-05
-
Product Parametersdynamic pressure monitor
-
In stock1 unit
-
ManufacturerBently Nevada
-
Input Channels4
-
Transducer InputsTwo-wire or three-wire pressure
-
Three-wire Impedance10 kΩ
-
Two-wire Impedance1.5 to 3.5 MΩ typical
-
Pressure Sensitivity100 mV/psi
-
Recorder Output4 to 20 mA per channel
-
Recorder Load0 to 600 Ω
-
Recorder Update100 ms or less
-
Low Filter Range5 Hz to 4 kHz
-
High Filter Range10 Hz to 14.75 kHz
-
Buffered Output550 Ω
-
Channel PairingChannels 1–2 and 3–4
-
Alarm AccuracyWithin 0.13% of setpoint
-
Three-wire Supply-24 V DC
-
Two-wire Supply3.3 mA at 22 V DC
View all additional
Alternative Names
3500/64M 176449 05
3500 machinery protection system dynamic pressure monitor
Bently Nevada dynamic pressure monitor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3500/64M 176449-05 to the installed 3500 machinery protection system
Bently Nevada 3500/64M 176449-05 is a dynamic pressure monitor for the 3500 machinery protection system. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare two-wire impedance (1.5 to 3.5 MΩ typical), pressure sensitivity (100 mV/psi) and recorder output (4 to 20 mA per channel) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3500/64M 176449-05
- Product class: dynamic pressure monitor
- Family: 3500 machinery protection system
The Bently Nevada 3500/64M 176449-05 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3500/64M 176449-05 identity before exchange
Replace 3500/64M 176449-05 only after matching the complete article code, dynamic pressure monitor, installed 3500 machinery protection system role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3500/64M 176449-05
- Product class: dynamic pressure monitor
- Family check: 3500 machinery protection system
The Bently Nevada 3500/64M 176449-05 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 3500/64M 176449-05
- Bently Nevada 3500 machinery protection system references reviewed
- Exact Bently Nevada identity required before service
Documentation for Bently Nevada 3500/64M 176449-05 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24.13 × 2.44 × 24.18 cm
-
Shipping weight0.82 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/64M 176449-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity checks confirm the exact 3500/64M 176449-05?
Match the complete 3500/64M 176449-05 nameplate, dynamic pressure monitor, hardware revision and documented 3500 machinery protection system position. -
What should engineering verify before connecting 3500/64M 176449-05?
Compare the documented supply, signal or network interface, connector keying, addresses and companion equipment for 3500/64M 176449-05. -
Can a similar family article directly replace 3500/64M 176449-05?
No automatic substitution is established; compare the complete article code, ratings, interface set, firmware and physical arrangement. -
What records should be captured before removing 3500/64M 176449-05?
Photograph labels, terminals, plugs, shields, earth conductors and adjacent modules, then back up the applicable configuration. -
How should 3500/64M 176449-05 be inspected on arrival?
Check the exact label, housing or board condition, connectors, supplied accessories and transport protection before installation. -
Which commissioning checks apply after fitting 3500/64M 176449-05?
Verify supply and wiring, restore the approved configuration, inspect diagnostics and test the affected system function safely. -
What quotation details are required for 3500/64M 176449-05?
Provide the complete model, quantity, nameplate photographs, installed system, required interface and destination. -
Which service evidence should be retained for 3500/64M 176449-05?
Retain the receiving inspection, connection record, configuration backup, measurements, diagnostic results and acceptance record.
READY TO VERIFY YOUR PART?
Get a 3500/64M 176449-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
