PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/77M 176449-07
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3500/77M 176449-07 3500/77M Recip Cylinder Pressure Monitor
Bently Nevada 3500/77M 176449-07 Recip Cylinder Pressure Monitor processes cylinder-pressure inputs for reciprocating compressor protection and performance monitoring. Its four-channel 3500 rack module accepts compatible pressure transducers and applies signal conditioning, configurable measurements, alarm setpoints and rack communications. Each channel evaluates the pressure waveform and compares selected measurements with programmed limits. This provides continuous cylinder-condition data and alarms for reciprocating compressor operation.
BEFORE YOU BUY
Confirm the complete 3500/77M Recip Cylinder Pressure Monitor
ACTUAL APPLICATIONS
Verified application context for 3500/77M 176449-07
Manufacturer documentation supports these equipment applications when the complete system configuration and interfaces are verified.
-
01 · OIL & GAS
Gas compressor cylinder pressure stations
Cylinder pressure systemsPipeline compressor cylindersGas gathering compressor stages -
02 · CHEMICAL PROCESSING
Hydrogen and feed gas compressor units
Process compressor systemsHydrogen compressor cylindersFeed gas compressor stages -
03 · REFRIGERATION
Large reciprocating refrigeration packages
Cooling compressor systemsRefrigerant compressor cylindersCold-storage compressor stages
Technical specifications for 3500/77M 176449-07
-
Product Model3500/77M 176449-07
-
Product Parameters3500/77M Recip Cylinder Pressure Monitor
-
In stock1 unit
-
ManufacturerBently Nevada
-
Input ChannelsFour
-
Input SignalCylinder pressure transducers
-
Measured VariablesPeak compression and tension
-
Rod Reversal OutputDegree of rod reversal
-
Recorder Output4 to 20 mA
-
Recorder Load600 ohm maximum
-
Recorder Update100 ms or less
-
Buffered OutputsOne coaxial output per channel
-
Channel ConfigurationRack configuration software
-
Alarm FunctionsAlert and Danger levels
-
Rack AllocationOne full-height front slot
-
Companion I/OCylinder pressure I/O module
View all additional
Alternative Names
3500/77M 176449 07
Bently Nevada reciprocating cylinder pressure monitor
3500 machinery protection systems reciprocating cylinder pressure monitor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3500/77M 176449-07 to the installed 3500 machinery protection systems
Bently Nevada 3500/77M 176449-07 is a reciprocating cylinder pressure monitor for the 3500 machinery protection systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare rod reversal output (Degree of rod reversal), recorder output (4 to 20 mA) and recorder load (600 ohm maximum) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3500/77M 176449-07
- Product class: reciprocating cylinder pressure monitor
- Family: 3500 machinery protection systems
The Bently Nevada 3500/77M 176449-07 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3500/77M 176449-07 identity before exchange
Replace 3500/77M 176449-07 only after matching the complete article code, reciprocating cylinder pressure monitor, installed 3500 machinery protection systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3500/77M 176449-07
- Product class: reciprocating cylinder pressure monitor
- Family check: 3500 machinery protection systems
The Bently Nevada 3500/77M 176449-07 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Official Bently Nevada 3500/77M 176449-07 product documentation is checked before order
- Confirm 3500 Reciprocating Compressor Monitoring System configuration in current manuals
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 3500/77M 176449-07 3500/77M Recip Cylinder Pressure Monitor must match the installed 3500 Reciprocating Compressor Monitoring System; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.6 × 25.6 × 24.4 cm
-
Shipping weight0.85 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/77M 176449-07
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should 3500/77M 176449-07 be identified for quotation?
Use the complete 3500/77M 176449-07 marking, quantity and clear nameplate photographs. -
Which system details must be matched for 3500/77M 176449-07?
Confirm the installed 3500 machinery protection systems, mating hardware, signal interface and required approvals. -
What should incoming inspection cover?
Inspect the reciprocating cylinder pressure monitor label, housing, cable, connector and transport condition before installation. -
Can a related part number replace 3500/77M 176449-07?
Do not assume interchangeability; compare every order-code field, rating and physical interface. -
Which records should be captured before removal?
Record the machine location, cable routing, connector orientation, channel configuration and current gap or bias value. -
How should the replacement be commissioned?
Restore the documented mounting and wiring, then verify signal quality, alarms and channel behavior under controlled conditions. -
Which documents should remain with the asset record?
Retain the nameplate images, installation record, configuration backup, test results and acceptance evidence. -
What is the role of 3500/77M 176449-07?
The reciprocating cylinder pressure monitor performs its documented measurement or signal function within the matched 3500 machinery protection systems.
READY TO VERIFY YOUR PART?
Get a 3500/77M 176449-07 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
3500/77M 176449-073500/77M Recip Cylinder Pressure MonitorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
