PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 350800-01-180-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Catalytic combustible gas sensor
Bently Nevada 350800-01-180-00 is a catalytic combustible gas sensor. The sensor uses catalytic and reference beads to detect combustible gas in a compatible system. It supports methane and hydrogen measurements with the specified monitor. Calibration, gas exposure, contaminants and installation conditions affect reliable detection and require regular checks.
The order specifies a one-hundred-eighty-inch lead and no separately supplied flameproof housing. This does not waive flameproof installation requirements. Select the approved termination arrangement and follow the complete sensor and system instructions; do not apply vibration-probe cable practices to this gas-sensing circuit.
The order specifies a one-hundred-eighty-inch lead and no separately supplied flameproof housing. This does not waive flameproof installation requirements. Select the approved termination arrangement and follow the complete sensor and system instructions; do not apply vibration-probe cable practices to this gas-sensing circuit.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500 hazardous gas detection system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · GAS TURBINE COMPARTMENTS
Detecting combustible fuel-gas presence
The manufacturer discusses gas-turbine installations where calibrated sensors and configured monitoring channels detect combustible gas. Sensor position must account for airflow, gas density and possible leaks. -
02 · GAS FUEL MODULES
Maintaining sensitivity near fuel equipment
The documented applications include gas fuel modules. Catalytic sensors require periodic gas checks because silicone compounds, sulfur and other contaminants can reduce sensitivity without an obvious external indication. -
03 · HYDROGEN-COOLED GENERATORS
Monitoring generator-compartment gas
The manufacturer also identifies hydrogen-cooled generator compartments. The sensor, calibration gas and protection configuration must suit hydrogen; this is not evidence of toxic-gas or oxygen-deficiency measurement capability.
Technical specifications for 350800-01-180-00
-
Product Model350800-01-180-00
-
Product ParametersCatalytic combustible gas sensor
-
In stock5 units
-
ManufacturerBently Nevada
-
Sensing principleContinuous-diffusion catalytic bead with reference bead
-
Documented gasesMethane and hydrogen
-
Ordered lead length180 inches
-
Separate housing optionNone included
-
Compatible monitoring system3500/63 Hazardous Gas Detection
-
Stabilization before calibrationAt least 30 minutes powered
-
Recommended calibration interval90 days in the documented turbine applications
-
Manual calibration gas flow0.5 L/min using specified equipment
-
Remote calibration gas flow2.0 L/min with the approved remote calibrator
-
Operating temperature-40 to +200 deg C
-
Storage temperature0 to +40 deg C
-
Sensor constructionStainless-steel body with integral sintered flame arrestor
-
Shock rating250 g
-
Vibration rating5 g, 10 to 3200 Hz
-
Response with 100% LEL test gasT50 below 10 s; T60 below 12 s; T90 below 30 s
View all additional
Alternative Names
350800 01 180 00
350800-01-180-00 catalytic combustible gas sensor
Bently Nevada 350800-01-180-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
CATALYTIC COMBUSTIBLE GAS SENSOR
Integrating 350800-01-180-00
The sensor uses catalytic and reference beads to detect combustible gas in a compatible system. It supports methane and hydrogen measurements with the specified monitor. Calibration, gas exposure, contaminants and installation conditions affect reliable detection and require regular checks.
Use the documented 350800 catalytic-bead sensor with a 3500/63 monitor, matching I/O and external sensor power. The system measures the gas used for channel calibration. A different sensor technology, arbitrary gas or incomplete electronics cannot be assumed compatible from the base platform name.
Use qualified personnel and the complete hazardous-area installation instructions. De-energize before opening a flameproof housing or replacing a sensor unless absence of gas is independently confirmed under the prescribed procedure. Wiring changes can create NotOK conditions and affect voting logic; verify protection before return to service.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 350800-01-180-00 catalytic combustible gas sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 350800-01-180-00 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the documented 350800 catalytic-bead sensor with a 3500/63 monitor, matching I/O and external sensor power. The system measures the gas used for channel calibration. A different sensor technology, arbitrary gas or incomplete electronics cannot be assumed compatible from the base platform name.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 350800-01-180-00 catalytic combustible gas sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 350800-01-180-00 catalytic combustible gas sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20x18x2cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 350800-01-180-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 350800-01-180-00 identified?
The order specifies a one-hundred-eighty-inch lead and no separately supplied flameproof housing. This does not waive flameproof installation requirements. Select the approved termination arrangement and follow the complete sensor and system instructions; do not apply vibration-probe cable practices to this gas-sensing circuit. -
What is the function of this component?
The sensor uses catalytic and reference beads to detect combustible gas in a compatible system. It supports methane and hydrogen measurements with the specified monitor. Calibration, gas exposure, contaminants and installation conditions affect reliable detection and require regular checks. -
Which equipment and settings must match?
Use the documented 350800 catalytic-bead sensor with a 3500/63 monitor, matching I/O and external sensor power. The system measures the gas used for channel calibration. A different sensor technology, arbitrary gas or incomplete electronics cannot be assumed compatible from the base platform name. -
What application does it support?
The manufacturer discusses gas-turbine installations where calibrated sensors and configured monitoring channels detect combustible gas. Sensor position must account for airflow, gas density and possible leaks. -
What should be checked during installation?
Use qualified personnel and the complete hazardous-area installation instructions. De-energize before opening a flameproof housing or replacing a sensor unless absence of gas is independently confirmed under the prescribed procedure. Wiring changes can create NotOK conditions and affect voting logic; verify protection before return to service. -
Can this detect every hazardous gas, including toxic gases?
No. The verified system documentation specifically identifies combustible methane and hydrogen. Gas-specific calibration and sensing limitations apply; toxic-gas or oxygen-deficiency detection must not be inferred. -
Why must a sensor be tested even when it appears normal?
Catalytic beads can lose sensitivity through gas exposure, poisoning or aging. The manual recommends regular gas verification and at least 90-day recalibration for its listed turbine-related applications. Appearance or a powered status is not proof of correct sensitivity. -
Does the no-housing order remove hazardous-area wiring requirements?
No. The sensor may be installed directly into suitable conduit only under the documented flameproof methods. Approved terminations and seals remain necessary; splicing sensor leads to field wiring is not an acceptable flameproof installation method.
READY TO VERIFY YOUR PART?
Get a 350800-01-180-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
