PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Legacy proximity extension cable
Bently Nevada 21747-080-00 is a proximity extension cable. The extension cable forms part of the calibrated connection between a proximity probe and its Proximitor. Its selection depends on the integral probe lead and required total measuring-chain length. It is not the separate field cable running from conditioner to monitor.
The 21747-080-00 identifier belongs to the 21747 extension-cable family. The extension length is 8 m. Match the integral probe lead and Proximitor calibration before replacement. Cable-length options missing from the supplied historical table remain unassigned rather than inferred from their digits.
The 21747-080-00 identifier belongs to the 21747 extension-cable family. The extension length is 8 m. Match the integral probe lead and Proximitor calibration before replacement. Cable-length options missing from the supplied historical table remain unassigned rather than inferred from their digits.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 21747-080-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
02 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
03 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants.
Technical specifications for 21747-080-00
-
Product Model21747-080-00
-
Product ParametersLegacy proximity extension cable
-
In stock5 units
-
ManufacturerBently Nevada
-
Compatible sensing family7200 5 mm and 8 mm
-
Circuit positionBetween the probe integral lead and Proximitor
-
Operating temperature-34 to +177 deg C
-
Relative humidity limit95%, noncondensing
-
Physical/electrical length relationPhysical length equals electrical length within +/-10%
-
Extension length8 m
-
Armor selectionWithout armor
View all additional
Alternative Names
21747 080 00
21747-080-00 proximity extension cable
Bently Nevada 21747-080-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LEGACY PROXIMITY EXTENSION CABLE
Integrating 21747-080-00
The extension cable forms part of the calibrated connection between a proximity probe and its Proximitor. Its selection depends on the integral probe lead and required total measuring-chain length. It is not the separate field cable running from conditioner to monitor.
Use the documented 7200 5 mm or 8 mm probe, extension and Proximitor combination. The complete probe-to-Proximitor chain must match its five-metre or nine-metre calibration. The catalogue does not establish interchangeability with a 3300 XL or NSv component.
Select the extension together with the installed probe and Proximitor. The four-metre and four-and-a-half-metre options are listed for the 18745-03 five-metre Proximitor only. Protect the coaxial connection and do not confuse sensing-chain length with monitor field wiring.
Features:
- Match exact probe geometry, integral lead, extension cable and Proximitor calibration
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 21747-080-00 proximity extension cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 21747-080-00 requires comparing exact probe geometry, integral lead, extension cable and Proximitor calibration. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the documented 7200 5 mm or 8 mm probe, extension and Proximitor combination. The complete probe-to-Proximitor chain must match its five-metre or nine-metre calibration. The catalogue does not establish interchangeability with a 3300 XL or NSv component.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 21747-080-00 proximity extension cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 21747-080-00 proximity extension cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size19x19x2cm
-
Shipping weight0.24 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544200000
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 21747-080-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 21747-080-00 identify?
The 21747-080-00 identifier belongs to the 21747 extension-cable family. The extension length is 8 m. Match the integral probe lead and Proximitor calibration before replacement. Cable-length options missing from the supplied historical table remain unassigned rather than inferred from their digits. -
What is the function of this proximity extension cable?
The extension cable forms part of the calibrated connection between a proximity probe and its Proximitor. Its selection depends on the integral probe lead and required total measuring-chain length. It is not the separate field cable running from conditioner to monitor. -
Which sensing components must be compatible?
Use the documented 7200 5 mm or 8 mm probe, extension and Proximitor combination. The complete probe-to-Proximitor chain must match its five-metre or nine-metre calibration. The catalogue does not establish interchangeability with a 3300 XL or NSv component. -
Where is the documented system used?
The documented system supports eccentricity and vibration amplitude/phase measurements. Suitable monitoring or diagnostic equipment is still required to interpret these signals; the component is not a standalone diagnostic instrument. -
What must be checked during installation?
Select the extension together with the installed probe and Proximitor. The four-metre and four-and-a-half-metre options are listed for the 18745-03 five-metre Proximitor only. Protect the coaxial connection and do not confuse sensing-chain length with monitor field wiring. -
Can a 4 m extension be selected for either Proximitor length?
No. The ordering-table footnote restricts the 4 m and 4.5 m extensions to the 18745-03 five-metre Proximitor. Account for the integral probe lead when selecting the complete chain. -
Does the cable length alone establish the system length?
No. The integral probe lead and extension together form the calibrated probe-to-Proximitor length. The Proximitor-to-monitor cable is a separate connection and must not be included in that sensing length.
READY TO VERIFY YOUR PART?
Get a 21747-080-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
