PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 7200 Proximity Transducer Systems
- 22810-00-06-10-02
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Armored metric proximity probe
Bently Nevada 22810-00-06-10-02 is a standard mount, armored 8 mm probe in the 7200 proximity transducer family. The manufacturer ordering table identifies its M10 x 1 thread, sixty millimeter case, zero unthreaded length and one meter integral cable.
The probe senses a conductive target without contact as part of the matching 7200 system. A miniature male coaxial connector joins the specified extension cable and Proximitor. Check the complete five or nine meter system arrangement and target conditions before using this legacy component.
The probe senses a conductive target without contact as part of the matching 7200 system. A miniature male coaxial connector joins the specified extension cable and Proximitor. Check the complete five or nine meter system arrangement and target conditions before using this legacy component.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Documented application roles
These applications describe the compatible manufacturer series, not a claim that this exact order is installed in a named project.
-
01 · TURBOMACHINERY
Shaft vibration monitoring
The matched proximity system observes radial shaft movement on fluid-film bearing machinery. Probe geometry, target material and total electrical length must match the selected measurement channel. -
02 · POSITION
Thrust position measurement
A correctly positioned probe observes axial target movement for the compatible position channel. Its installation clearance and transducer family must be checked before setting monitoring limits. -
03 · ROTATION
Rotational reference channels
The compatible system can provide rotational reference measurements from a suitable target. Confirm target geometry and the monitor configuration; the probe is not a standalone speed instrument.
Technical specifications for 22810-00-06-10-02
-
Product Model22810-00-06-10-02
-
Product ParametersArmored metric proximity probe
-
ManufacturerBently Nevada
-
Tip diameter8 mm
-
Mounting threadM10 x 1
-
Case length60 mm
-
Unthreaded length0 mm
-
Integral cable length1.0 m
-
Mechanical protectionStainless steel armor
-
ConnectorMiniature male coaxial
-
Mounting arrangementStandard mount
-
Probe tip constructionPolyphenylene sulfide (PPS), 8 mm family
-
Probe and cable temperature-34 to +177 degrees C
View all additional
Alternative Names
22810 00 06 10 02
22810-00-06-10-02 armored metric proximity probe
Bently Nevada 22810-00-06-10-02
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ARMORED METRIC PROXIMITY PROBE
Integrating 22810-00-06-10-02
Bently Nevada 22810-00-06-10-02 is a standard mount, armored 8 mm probe in the 7200 proximity transducer family. The manufacturer ordering table identifies its M10 x 1 thread, sixty millimeter case, zero unthreaded length and one meter integral cable.
The probe senses a conductive target without contact as part of the matching 7200 system. A miniature male coaxial connector joins the specified extension cable and Proximitor. Check the complete five or nine meter system arrangement and target conditions before using this legacy component.
For this order, verify 8 mm; M10 x 1; 60 mm. Family specifications apply only to the documented component and installation. Check the complete supplied identity before selecting mating equipment.
Features:
- Match the complete ordered configuration
- Use the correct manufacturer documentation
- Keep component and system specifications distinct
The 22810-00-06-10-02 armored metric proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 22810-00-06-10-02 identity and the documented installation before replacement. Similar appearance, connector size or a shared family name does not establish an unconditional substitute.
No exact-order discontinuation date or designated successor was established in the reviewed catalog. Its legacy status alone does not establish a date or an interchangeable replacement.
No exact-order hardware revision, discontinuation date or designated successor was established in the reviewed manufacturer materials. Publication revision Not shown is not a product hardware revision; unverified lifecycle claims are not added.
Features:
- Confirm exact identity before replacement
- Check field wiring and mounting requirements
- Do not infer lifecycle facts from age
The 22810-00-06-10-02 armored metric proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 22810-00-06-10-02 armored metric proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 x 22 x 3.3 cm
-
Shipping weight0.12 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 22810-00-06-10-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is this an XL probe?
No. The supplied manufacturer catalog identifies 22810 in the legacy 7200 8 mm family. XL specifications must not be substituted for its documented configuration. -
What does the 06 case option mean?
For this metric probe, the case length code is in ten millimeter increments. Option 06 specifies a sixty millimeter case. -
Does the 02 connector code select ClickLoc?
The reviewed legacy table calls it a miniature male coaxial connector. It does not establish the later ClickLoc designation for this order. -
Is a separate extension cable always used?
This order has a one meter integral lead. Match it to the documented extension cable and five or nine meter Proximitor configuration; the catalog treats the longer integral-lead variants separately. -
Which measurements does the 7200 family support?
The catalog describes static and dynamic target distance measurements, including radial vibration and axial thrust position, with the compatible monitor. -
Has a discontinuation date been verified?
No exact-order discontinuation date or designated successor was established in the reviewed catalog. Its legacy status alone does not establish a date or an interchangeable replacement.
READY TO VERIFY YOUR PART?
Get a 22810-00-06-10-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
