AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Friday, June 26
Fast Shipping Available
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 74712-06-05-02-00
-
Product Model74712-06-05-02-00
-
Product ParametersHigh-temperature Two-wireTransducer
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size10x4x4cm
-
ManufacturerBently Nevada
-
Weight0.44 kg
-
Transducer Mounting Angle0 ±100, 10 Hz (600 cpm)
-
Mounting Base OptionNo base; 1/2-20 UNF-3A stud
-
Connector OptionTop Mount
-
Agency Approval OptionNo Approvals
-
Coil Resistance1.25 kΩ ± 5%
-
Locked Coil Inductance125 mH typical
Description
Alternative Names
74712 06 05 02 00
74712 O6 O5 O2 OO
747I2 06 05 02 00
747I2 O6 O5 O2 OO
74712-O6-O5-O2-OO
747I2-06-05-02-00
747I2-O6-O5-O2-OO
74712-06-05-02-01
74712-06-05-02-04
Information
Overview
Manuals
Application Notes
Product Applications
Electrical Connections
Features:
- High-temperature operation
- Two-wire moving-coil technology
- Self-generating moving-coil technology
- 10 Hz minimum operating frequency
- 1/2-20 UNF threaded stud mounting
The 74712-06-05-02-00 operates continuously over a standard temperature range of −29°C to +204°C (−20°F to +400°F), enabling reliable performance in high-temperature industrial environments where conventional transducers would fail. The 74712 does not require external power, making it convenient for both continuous monitoring installations and portable measurement applications in conjunction with test or diagnostic instruments.
The 74712-06-05-02-00 Bently Nevada High-temperature Two-wireTransducer may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 74712-06-05-02-00 High-temperature Two-wireTransducer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 74712-06-05-02-00 configuration incorporates a 1/2-20 UNF threaded stud for direct mounting and a top-mounted connector arrangement that facilitates installation and maintenance. The sensor can be connected to Bently Nevada monitoring systems, vibration monitors, and machinery protection platforms for continuous asset condition assessment.
Frequency response extends from the minimum operating frequency of 10 Hz (600 cpm) to 1 kHz (60,000 cpm) with +0, –3 dB typical deviation. The velocity range is 25 mm/s (1 in/s) at +22°C with a 10 kΩ load. Maximum lead wire length between the transducer and the monitor is 305 metres (1,000 feet); frequency roll-off at longer lengths should be consulted in the installation manual.
- Power Generation Machinery:Long-term vibration: gas/steam turbines & generators
- Petrochemical & Oil Refining:Ex-certified sensors: compressors/pumps in flammable gas
- Aerospace & Aviation:Flight testing: engines, landing gear & structure (Airbus/Boeing)
- Industrial Manufacturing:Early fault detection for robots, conveyors & machine tools
- Extreme Environmental Monitoring:Rugged: 100% humidity, salt spray, steam, dust/sand
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Polarity: Pin A goes positive relative to Pin B when the transducer case velocity moves toward the connector.Signal Load: Requires a 10 kΩ resistive load across pins A and B.
Cable Limits: Maximum lead wire length is 305 meters (1,000 feet) between the transducer and the monitor.
Signal Converter: Can be connected to the Bently Nevada 9513 VDC (Velocity-to-Displacement Converter) if velocity-to-displacement conversion is required.
Technical notes
The 74712 is available with comprehensive hazardous area approvals including cNRTLus, ATEX, and IECEx certifications for installation in potentially explosive atmospheres. The 74712 meets Class I, Division 1, Groups A, B, C and D; Class II, Groups E, F and G; and Class III requirements, as well as Class I, Zone 2 with Ex nA IIC T6 Gc and Ex ec IIC T6 Gc ratings at ambient temperatures from −20°C to +40°C. The 74712 also complies with FCC Part 15 rules, EMC Directive 2014/30/EU (EN 61326-1), and RoHS Directive 2011/65/EU, ensuring electromagnetic compatibility and environmental compliance for industrial use.
FAQs
-
What is the 74712-06-05-02-00?
+The Bently Nevada 74712-06-05-02-00 is a High-Temperature Seismoprobe Velocity Transducer used to measure absolute bearing housing, casing, and structural vibration in industrial machinery -
What is the maximum operating temperature for this transducer?
+The 74712 series is explicitly engineered for high-temperature environments, with an operating temperature range of -29 °C to +204 °C. -
Does the 74712 require an external power supply?
+No, it is a two-wire transducer that does not require external power. It uses the loop current from the connected monitoring system. -
What is its electrical sensitivity?
+The electrical sensitivity is 20 mV/mm/s (500 mV/in/s)
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN