PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
9200-06-01-11-04 - Seismoprobe Velocity Transducer
Bently Nevada 9200-06-01-11-04 is a two-wire moving-coil velocity transducer for absolute bearing-housing, casing or structural vibration. This order selects a 0-degree mounting reference with a +/-100-degree permitted orientation range and a 10 Hz minimum operating frequency.
Connector option 01 supplies a top connector without a cable. The isolated circular M10 x 1 base selected by 11 satisfies the isolated-base requirement for the 04 ATEX/IECEx approval option. Match the separate cable and monitoring input to the transducer before installation.
Connector option 01 supplies a top connector without a cable. The isolated circular M10 x 1 base selected by 11 satisfies the isolated-base requirement for the 04 ATEX/IECEx approval option. Match the separate cable and monitoring input to the transducer before installation.
BEFORE YOU BUY
Check the complete ordered configuration
ACTUAL APPLICATIONS
Where 9200-06-01-11-04 supports measurement tasks
Manufacturer literature supports the following measurement arrangements. Confirm the complete installed system and the exact ordered configuration before selecting this component.
-
01 · CONTINUOUS MONITORING
Track bearing-housing velocity
The 9200 supports continuous vibration monitoring when connected through an appropriate two-wire cable. Select a bearing-housing location that transmits the relevant rotor vibration, and maintain the ordered mounting orientation and the specified monitoring input load. -
02 · PORTABLE DIAGNOSTICS
Collect periodic velocity measurements
The moving-coil sensor needs no external excitation supply, making it suitable for periodic checks with compatible test or diagnostic instruments. Review the measurement location and 10 Hz lower operating limit before interpreting the results from this orientation option. -
03 · STRUCTURAL RESPONSE
Measure absolute vibration at a structure
The manufacturer identifies structural vibration as a Seismoprobe application. Use a suitable attachment point and the isolated M10 x 1 base to sense motion along the transducer axis. This is an absolute velocity measurement, not a shaft-to-casing relative displacement reading.
Technical specifications for 9200-06-01-11-04
-
Product Model9200-06-01-11-04
-
Product ParametersSeismoprobe Velocity Transducer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting angle / frequency option06: 0 degrees +/-100 degrees; minimum 10 Hz
-
Connector / cable option01: top mount; no cable
-
Mounting base option11: isolated circular M10 x 1
-
Agency approval option04: ATEX/IECEx
-
Sensitivity20 mV/(mm/s), +/-5% with proper termination and calibration orientation
-
Calibration load10 kilohms across terminals A and B
-
Coil resistance1.25 kilohms +/-5%
-
Locked coil inductance125 mH typical
-
Maximum dynamic displacement2.54 mm peak-to-peak
-
Operating / storage temperature-29 to +121 deg C
-
Recommended base mounting torque5.6 N m for M10 x 1 option
-
Case and adapter materialAnodized aluminum A204
View all additional
Alternative Names
9200-06-01-11-04
Bently Nevada 9200-06-01-11-04
Seismoprobe Velocity Transducer 9200-06-01-11-04
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 9200-06-01-11-04 is a two-wire moving-coil velocity transducer for absolute bearing-housing, casing or structural vibration. This order selects a 0-degree mounting reference with a +/-100-degree permitted orientation range and a 10 Hz minimum operating frequency.
Connector option 01 supplies a top connector without a cable. The isolated circular M10 x 1 base selected by 11 satisfies the isolated-base requirement for the 04 ATEX/IECEx approval option. Match the separate cable and monitoring input to the transducer before installation.
Use the complete manufacturer installation and system instructions. The supplied technical-data extract identifies the documented configuration but is not a substitute for a controlled commissioning procedure.
Features:
- Passive moving-coil measurement
- Top connector without cable
- Isolated M10 x 1 mounting base
The 9200-06-01-11-04 requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete product identity and all selected option fields before accepting a replacement. Do not substitute a similar-looking family without an engineering review.
Connector option 01 supplies a top connector without a cable. The isolated circular M10 x 1 base selected by 11 satisfies the isolated-base requirement for the 04 ATEX/IECEx approval option. Match the separate cable and monitoring input to the transducer before installation.
Inspect the supplied nameplate, mechanical fit and connection arrangement. Retain the applicable manufacturer instructions and verify the installed measurement chain before returning it to service.
Features:
- Passive moving-coil measurement
- Isolated M10 x 1 mounting base
- ATEX/IECEx ordering option
The 9200-06-01-11-04 requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Bently Nevada 141626 Rev. V
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 9200-06-01-11-04 is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 9200-06-01-11-04
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why is the isolated mounting base important on this exact order?
Approval option 04 requires an isolated base in the manufacturer ordering table. Code 11 selects an isolated circular M10 x 1 base and is one of the listed qualifying choices. -
Does the top connector option include a factory integral lead?
No. Code 01 is top mount with no cable. Integral hardline cable options use different codes; include an appropriate separate interconnect in the system bill of materials. -
Would a 4.5 Hz channel specification be correct for option 06?
No. Option 06 has a 10 Hz minimum operating frequency. The 4.5 Hz limits in the family table belong to other, tightly controlled orientation options. -
What happens to the output sign when the case moves toward the connector?
Pin A becomes positive relative to pin B when the case velocity is toward the connector. Preserve this polarity when reviewing the measurement loop and cable terminations. -
Can a 24 V loop supply be connected directly to excite this sensor?
The Seismoprobe uses a passive moving-coil design and requires no external power. It is not a two-wire 4-20 mA transmitter; use the documented compatible monitoring input. -
Does this top-connector variant inherit the 100 percent humidity claim?
No. The 100 percent non-submerged condition is qualified for integral-cable versions. This order has no integral cable; the stated general limit is up to 95 percent noncondensing humidity. -
Is the 204-degree temperature rating applicable to the 9200?
No. That upper temperature belongs to the 74712 high-temperature version. The 9200 operating and storage range is -29 to +121 degrees C. -
How is a casing-velocity measurement different from a proximity-probe reading?
The 9200 senses absolute motion of its own mounting location. A proximity system measures relative distance to a conductive target. They observe different quantities and are not direct substitutes for one another.
READY TO VERIFY YOUR PART?
Get a 9200-06-01-11-04 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
