PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 990 and 991 Transmitter
- 990-05-70-01-06
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Two-wire vibration loop transmitter
Bently Nevada 990-05-70-01-06 is a vibration transmitter. It converts peak-to-peak shaft vibration from a compatible proximity sensing chain into a two-wire current-loop signal. Integrated signal conditioning removes the need for an external Proximitor Sensor; the receiving machinery control system implements the protection logic and alarms.
The order selects 0-5 mils peak-to-peak, a 7 m sensing system and 35 mm din rail clips. Match the NSv probe and extension cable to this electrical length, then confirm loop supply, load and delivered approval marking before commissioning.
The order selects 0-5 mils peak-to-peak, a 7 m sensing system and 35 mm din rail clips. Match the NSv probe and extension cable to this electrical length, then confirm loop supply, load and delivered approval marking before commissioning.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 990-05-70-01-06 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
02 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
03 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities.
Technical specifications for 990-05-70-01-06
-
Product Model990-05-70-01-06
-
Product ParametersTwo-wire vibration loop transmitter
-
In stock5 units
-
ManufacturerBently Nevada
-
Full-scale vibration range0-5 mils peak-to-peak
-
Transducer system length7 m
-
Mounting hardware35 mm DIN rail clips
-
Output4-20 mA, two-wire loop
-
Terminal supply+12 to +35 Vdc
-
Maximum loop resistance1000 ohm at 35 Vdc, including cable
-
Typical current limit23 mA
-
Not-OK outputLess than 3.6 mA
-
Power-up inhibit2-3 seconds
-
Compatible sensing family3300 NSv probe and matching extension cable
-
Signal conditioningIntegrated Proximitor circuitry
-
Diagnostic outputPROX OUT; not isolated
-
AdjustmentIndependent zero and span
-
Operating temperature-35 to +85 deg C
View all additional
Alternative Names
990 05 70 01 06
990-05-70-01-06 vibration transmitter
Bently Nevada 990-05-70-01-06
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TWO-WIRE VIBRATION LOOP TRANSMITTER
Integrating 990-05-70-01-06
It converts peak-to-peak shaft vibration from a compatible proximity sensing chain into a two-wire current-loop signal. Integrated signal conditioning removes the need for an external Proximitor Sensor; the receiving machinery control system implements the protection logic and alarms.
The documented standard input is a 3300 NSv probe and matching cable. A generic 8 mm probe is not automatically equivalent. Match system length and range to the receiver, and distinguish vibration amplitude from axial thrust-position measurement.
Check loop supply against total loop resistance. PROX OUT is non-isolated; the manufacturer specifies the 122115-01 test adapter for grounded AC-powered diagnostic equipment. Verify zero/span and the Not-OK output without disturbing the protection loop.
Features:
- Match the complete ordering identity, mounting interface, electrical connections and operating limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 990-05-70-01-06 vibration transmitter requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 990-05-70-01-06 requires comparing the complete ordering identity, mounting interface, electrical connections and operating limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The documented standard input is a 3300 NSv probe and matching cable. A generic 8 mm probe is not automatically equivalent. Match system length and range to the receiver, and distinguish vibration amplitude from axial thrust-position measurement.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 990-05-70-01-06 vibration transmitter requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 990-05-70-01-06 vibration transmitter must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size10x7.4x6cm
-
Shipping weight0.45 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 990-05-70-01-06
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented identity of 990-05-70-01-06?
The order selects 0-5 mils peak-to-peak, a 7 m sensing system and 35 mm din rail clips. Match the NSv probe and extension cable to this electrical length, then confirm loop supply, load and delivered approval marking before commissioning. -
What function does this vibration transmitter perform?
It converts peak-to-peak shaft vibration from a compatible proximity sensing chain into a two-wire current-loop signal. Integrated signal conditioning removes the need for an external Proximitor Sensor; the receiving machinery control system implements the protection logic and alarms. -
What must be matched when connecting this 990?
The documented standard input is a 3300 NSv probe and matching cable. A generic 8 mm probe is not automatically equivalent. Match system length and range to the receiver, and distinguish vibration amplitude from axial thrust-position measurement. -
Which documented application is relevant to this configuration?
The manufacturer includes small motors and fans among intended uses; suitable target geometry and control-system logic remain necessary. -
What must the installer check before commissioning?
Check loop supply against total loop resistance. PROX OUT is non-isolated; the manufacturer specifies the 122115-01 test adapter for grounded AC-powered diagnostic equipment. Verify zero/span and the Not-OK output without disturbing the protection loop. -
What is the specified full-scale vibration range?
0-5 mils peak-to-peak. This value belongs to the documented product or family scope; unresolved ordering fields are not inferred. -
Are all suffixes, revisions and replacements confirmed?
Approval option 06 is not listed in the current 990 ordering table; no certification is assigned.
READY TO VERIFY YOUR PART?
Get a 990-05-70-01-06 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
