PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- AM3100T2-Z2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Industrial IEPE acceleration sensor
Bently Nevada AM3100T2-Z2 is a IEPE acceleration sensor. The IEPE sensor converts machine acceleration into a proportional voltage signal using constant-current excitation. Its top exit connector and documented frequency response suit appropriately configured condition-monitoring inputs. Match the mounting, cabling and hazardous-area requirements to the complete installation.
The exact model AM3100T2-Z2 is the top exit, 100 mV/g sensor listed with a Zone 2 rating. The specified bandwidth and mounting differ between versions. Verify the product marking and applicable drawing rather than transferring another sensor variant's approval.
The exact model AM3100T2-Z2 is the top exit, 100 mV/g sensor listed with a Zone 2 rating. The specified bandwidth and mounting differ between versions. Verify the product marking and applicable drawing rather than transferring another sensor variant's approval.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for IEPE industrial accelerometer series
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · CONDITION MONITORING
Machine acceleration measurement
The manufacturer describes IEPE sensors for industrial vibration signals. Match the sensor sensitivity and frequency response to the monitoring input and required machinery measurement. -
02 · PERMANENT INSTALLATION
Isolated-case vibration sensing
Case isolation and internal shielding support the documented permanent-mount arrangement. Correct mounting and cable routing remain necessary; isolation does not make every grounding arrangement acceptable. -
03 · SPACE-CONSTRAINED LOCATIONS
Top exit cable access
Select the connector orientation to suit access at the sensor location. Retain room for a properly sealed cable connection and use the actual model's mounting requirements.
Technical specifications for AM3100T2-Z2
-
Product ModelAM3100T2-Z2
-
Product ParametersIndustrial IEPE acceleration sensor
-
In stock2 units
-
ManufacturerBently Nevada
-
Sensor sensitivity100 mV/g, +/-5% at 25 deg C
-
Acceleration range80 g peak
-
Amplitude nonlinearity1%
-
Frequency response, +/-3 dB0.4-14000 Hz typical
-
Resonant frequency30 kHz
-
Excitation voltage source18-30 Vdc
-
Constant-current excitation2-10 mA
-
Maximum output impedance100 ohm
-
Bias output voltage12 Vdc
-
GroundingCase isolated, internally shielded
-
Temperature range-55 to +120 deg C
-
SealingHermetic
-
Case material316L stainless steel
-
Mounting connection1/4-28 UNF tapped hole
-
ConnectorTop exit, 2-pin MIL-C-5015 style
View all additional
Alternative Names
AM3100T2 Z2
AM3100T2-Z2 IEPE acceleration sensor
Bently Nevada AM3100T2-Z2
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
INDUSTRIAL IEPE ACCELERATION SENSOR
Integrating AM3100T2-Z2
The IEPE sensor converts machine acceleration into a proportional voltage signal using constant-current excitation. Its top exit connector and documented frequency response suit appropriately configured condition-monitoring inputs. Match the mounting, cabling and hazardous-area requirements to the complete installation.
Use an IEPE-compatible constant-current interface with the documented voltage and current range. A 4-20 mA input alone is not equivalent. Match sensitivity, signal bandwidth, connector and the hazardous-area interface; the sensor is not a proximity probe or velocity transmitter.
Follow the specified mounting connection and drawing 117M2767. Connect pin A to power/signal, pin B to common and the shell as documented for ground. Use shielded twisted-pair cable no longer than 100 feet and retain the required connector sealing.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The AM3100T2-Z2 IEPE acceleration sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of AM3100T2-Z2 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use an IEPE-compatible constant-current interface with the documented voltage and current range. A 4-20 mA input alone is not equivalent. Match sensitivity, signal bandwidth, connector and the hazardous-area interface; the sensor is not a proximity probe or velocity transmitter.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The AM3100T2-Z2 IEPE acceleration sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the AM3100T2-Z2 IEPE acceleration sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.2x2x2cm
-
Shipping weight0.05 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about AM3100T2-Z2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is AM3100T2-Z2 identified?
The exact model AM3100T2-Z2 is the top exit, 100 mV/g sensor listed with a Zone 2 rating. The specified bandwidth and mounting differ between versions. Verify the product marking and applicable drawing rather than transferring another sensor variant's approval. -
What is the function of this component?
The IEPE sensor converts machine acceleration into a proportional voltage signal using constant-current excitation. Its top exit connector and documented frequency response suit appropriately configured condition-monitoring inputs. Match the mounting, cabling and hazardous-area requirements to the complete installation. -
Which installed equipment must be matched?
Use an IEPE-compatible constant-current interface with the documented voltage and current range. A 4-20 mA input alone is not equivalent. Match sensitivity, signal bandwidth, connector and the hazardous-area interface; the sensor is not a proximity probe or velocity transmitter. -
Where is this component used?
The manufacturer describes IEPE sensors for industrial vibration signals. Match the sensor sensitivity and frequency response to the monitoring input and required machinery measurement. -
What must be checked during installation?
Follow the specified mounting connection and drawing 117M2767. Connect pin A to power/signal, pin B to common and the shell as documented for ground. Use shielded twisted-pair cable no longer than 100 feet and retain the required connector sealing. -
Can this sensor connect directly to an ordinary 4-20 mA channel?
Not as an equivalent signal interface. It needs the documented constant-current IEPE excitation and provides an acceleration-proportional voltage signal, not a loop-powered current output. -
Do sensors with the same 100 mV/g sensitivity have the same frequency range?
No. This exact model specifies 0.4-14000 Hz at +/-3 dB and 0.7-9000 Hz at +/-10%, both typical. Check the exact model instead of assuming identical response from sensitivity alone.
READY TO VERIFY YOUR PART?
Get a AM3100T2-Z2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
