PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SPMD1423 380-480 V modular drive without dynamic braking
Control Techniques SPMD1423 is a Unidrive SPM modular DC-input and AC-output drive module for 380 to 480 V supplies. It provides 290 A normal-duty current with a typical 160 kW motor rating at 400 V and 250 hp at 460 V.
For heavy-duty operation, SPMD1423 is rated at 246 A with a typical 132 kW motor at 400 V and 200 hp at 460 V. The module uses the documented 24 V DC cooling-fan supply and SPM enclosure, environmental and through-panel protection ratings.
For heavy-duty operation, SPMD1423 is rated at 246 A with a typical 132 kW motor at 400 V and 200 hp at 460 V. The module uses the documented 24 V DC cooling-fan supply and SPM enclosure, environmental and through-panel protection ratings.
BEFORE YOU BUY
Confirm the complete 380-480 V modular drive without dynamic braking
ACTUAL APPLICATIONS
Application fields for SPMD1423
SPMD1423 is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power Generation
Thermal and hydroelectric power productionRenewable generation and energy integration -
02 · WATER & WASTEWATER
Municipal Water and Industrial Wastewater Services
Municipal water treatment servicesIndustrial wastewater treatment operations -
03 · CHEMICAL PROCESSING
Chemical and Petrochemical Manufacturing
Industrial chemical productionPetrochemical production and processing
Technical specifications for SPMD1423
-
Product ModelSPMD1423
-
Product Parameters380-480 V modular drive without dynamic braking
-
In stock1 unit
-
ManufacturerControl Techniques
-
Module architectureDC input / AC output drive module
-
Voltage class380-480 V AC +/-10%
-
Dynamic braking configurationNot included
-
Normal-duty continuous current290 A
-
Normal-duty motor power160 kW at 400 V
-
Normal-duty motor rating250 hp at 460 V
-
Heavy-duty continuous current246 A
-
Heavy-duty motor power132 kW at 400 V
-
Heavy-duty motor rating200 hp at 460 V
-
Cooling-fan supply24 V DC, 5.0 A
-
Enclosure ratingIP20 / NEMA 1
-
Through-panel ratingIP54 / NEMA 12
-
Ambient temperature-15 to +40 C; derated to +50 C
-
Relative humidity95% maximum, non-condensing at 40 C
-
Operating altitude0-3000 m; 1% derating per 100 m above 1000 m
View all additional
Alternative Names
SPMD1423
Control Techniques SPMD1423
380-480 V modular drive without dynamic braking
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate SPMD1423 within Unidrive SPM modular drives
Use SPMD1423 as a 380-480 V DC-input and AC-output SPMD module within a documented Unidrive SPM arrangement. Its exact configuration has dynamic braking not included and must be matched to the approved module combination.
Confirm the shared DC-bus arrangement, output reactor, control-module relationship, 24 V DC fan supply and through-panel or IP20 mounting method. Preserve conductor identification, protection, cooling airflow and module order.
Apply the documented normal-duty or heavy-duty current and motor rating to the approved design. After installation, restore the controlled parameters and prove DC-bus, fan, output, braking and communication functions before returning the drive to service.
Features:
- Exact SPMD1423 configuration
- Verified SPM module arrangement
- Controlled drive commissioning
SPMD1423 requires the documented Unidrive SPM voltage, cooling, DC-bus and braking configuration before integration.
INTERCHANGEABILITY
Verify SPMD1423 before replacement
Record the complete SPMD1423 marking, voltage class, dynamic-braking configuration, installed SPM module count and control-module relationship before removal. A similar SPMD number is not evidence of direct interchangeability.
Compare the normal-duty and heavy-duty current ratings, motor power, fan supply, enclosure arrangement, DC-bus conductors and output connections with the installed assembly. Retain all approved protection and cooling provisions.
Back up the parameter set and document cable positions before replacement. After installation, inspect insulation and connections, verify fan operation and braking behaviour, and complete controlled motor-direction, current and diagnostic checks.
Features:
- Complete model and braking identity
- Recorded DC-bus, fan and output wiring
- Post-installation drive verification
Replacement of SPMD1423 requires verification against the installed SPM module arrangement, ratings and complete manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for SPMD1423
- Official Control Techniques Unidrive SPM documentation
- Directory links by brand and manufacturer index
Documentation for SPMD1423 must match the installed voltage class, braking configuration, module arrangement and complete product identity before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size31.0 x 79.6 x 29.8 cm
-
Net weight55.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginUnited Kingdom
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SPMD1423
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What voltage class applies to SPMD1423?
SPMD1423 is documented for the 380-480 V AC +/-10% Unidrive SPM voltage class. -
Does SPMD1423 include dynamic braking?
The exact SPMD1423 configuration is supplied without dynamic braking; retain the complete suffix when ordering. -
What continuous current should be checked for SPMD1423?
The normal-duty value is 350 A when separately cooled and 335 A otherwise; the heavy-duty value is 290 A. -
Which motor ratings are documented for SPMD1423?
At 400 V the typical ratings are 200 kW normal duty and 160 kW heavy duty; at 460 V they are 300 hp and 250 hp. -
What cooling supply does SPMD1423 require?
The documented cooling-fan supply is 24 V DC at 5.0 A. Confirm the fan supply and cooling arrangement before energising the module. -
Which enclosure ratings apply to SPMD1423?
The module is IP20 / NEMA 1, with IP54 / NEMA 12 available for the documented through-panel arrangement. -
What information should distributors request for SPMD1423?
Request the complete model, quantity, clear nameplate photographs, installed module arrangement, destination and required delivery date. -
What should maintenance teams verify before replacing SPMD1423?
Record the DC-bus connections, output wiring, control-module relationship, cooling supply and braking configuration, then complete controlled commissioning checks.
READY TO VERIFY YOUR PART?
Get a SPMD1423 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
SPMD1423380-480 V modular drive without dynamic brakingManufacturer: Control TechniquesView Details
-
SPMD1404380-480 V modular drive with dynamic brakingManufacturer: Control TechniquesView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
