PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ETEL
- EU-LCP-0-0-1000-00 60014500
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
EU-LCP-0-0-1000-00 60014500 PCI motion controller card
ETEL EU-LCP-0-0-1000-00 60014500 is an UltimET light PCI motion controller card with two four-axis interpolation groups.
It supports documented G-code, PVT, PT, ULM and kinematic-transform motion formats over a PCI 2.1/2.2 host interface.
It supports documented G-code, PVT, PT, ULM and kinematic-transform motion formats over a PCI 2.1/2.2 host interface.
BEFORE YOU BUY
Confirm the complete PCI motion controller card
ACTUAL APPLICATIONS
Where EU-LCP-0-0-1000-00 60014500 Fits Across Major Industry Sectors
Uses span electronics, metalworking and printing, subject to verified compatibility, operating conditions and project requirements.
-
01 · ELECTRONICS MANUFACTURING
Electronic Product Assembly and Commercial Manufacturing Operations
Electronic product assembly and production for industrial supply markets.Electronic product packaging and preparation for commercial distribution channels. -
02 · METALWORKING
Precision Metal Production and Industrial Material Finishing
Precision metal product manufacturing for industrial production supply chains.Metal material cutting and finishing for commercial manufacturing markets. -
03 · PRINTING
Commercial Printed Material Production and Print Finishing
Commercial printed material production for business and consumer markets.Printed product finishing and conversion for commercial distribution channels.
Technical specifications for EU-LCP-0-0-1000-00 60014500
-
Product ModelEU-LCP-0-0-1000-00 60014500
-
Product ParametersPCI motion controller card
-
In stock1 unit
-
ManufacturerETEL
-
Controller PlatformUltimET light PCI
-
Input Voltage3.3 V +9%
-
Power Input6 W
-
PCI CompatibilityPCI 2.1 and 2.2
-
Interpolation Groups2
-
Axes Per Group4 (X, Y, Z, Theta)
-
Interpolation TypesG-code, PVT, PT, ULM and kinematic transform
-
Onboard Digital I/O4 inputs / 4 outputs
-
External I/O Capacity16 analog in, 16 analog out, 128 digital in, 128 digital out
-
TransnET Bus Speed1 Gbps
-
TransnET Cycle Time100 us
-
Supported AxesUp to 63
-
Real-Time OSSupported
-
Programming Threads3 structured-language threads
-
Master/Slave ExchangeReal-time at 10 kHz
View all additional
Alternative Names
EU-LCP-0-0-1000-00 60014500
EU-LCP-0-0-1000-00
ETEL 60014500 UltimET light PCI controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match EU-LCP-0-0-1000-00 60014500 to the installed UltimET light motion controllers
ETEL EU-LCP-0-0-1000-00 60014500 is a PCI motion controller card for the UltimET light motion controllers. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare pci compatibility (PCI 2.1 and 2.2), interpolation groups (2) and axes per group (4 (X, Y, Z, Theta)) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: EU-LCP-0-0-1000-00 60014500
- Product class: PCI motion controller card
- Family: UltimET light motion controllers
The ETEL EU-LCP-0-0-1000-00 60014500 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete EU-LCP-0-0-1000-00 60014500 identity before exchange
Replace EU-LCP-0-0-1000-00 60014500 only after matching the complete article code, PCI motion controller card, installed UltimET light motion controllers role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: EU-LCP-0-0-1000-00 60014500
- Product class: PCI motion controller card
- Family check: UltimET light motion controllers
The ETEL EU-LCP-0-0-1000-00 60014500 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for EU-LCP-0-0-1000-00 60014500
- Product family: UltimET light motion controllers
- Exact ETEL identity required before service
Documentation for ETEL EU-LCP-0-0-1000-00 60014500 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 x 21 x 6 cm
-
Shipping weight0.35 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537109090
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about EU-LCP-0-0-1000-00 60014500
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does this controller fit a PCI 2.2 host?
EU-LCP-0-0-1000-00 60014500 supports the documented PCI 2.1 and PCI 2.2 interface. Confirm slot voltage, available space and the installed UltimET light configuration before fitting it. -
How many axes can each interpolation group control?
The ETEL controller provides two interpolation groups with four axes per group, identified as X, Y, Z and Theta in the official technical data. -
Which motion formats are available on this card?
The documented interpolation formats include G-code, PVT, PT, ULM and kinematic transform. The machine project must use the format configured for its control program. -
What I/O should maintenance record before replacement?
Record the four onboard inputs, four onboard outputs, external analog and digital I/O mapping, TransnET addresses and axis assignments before removing the ETEL card. -
How should TransnET operation be checked after service?
Confirm the 1 Gbps TransnET link, the configured 100 microsecond cycle and communication with every assigned axis before returning the motion system to production. -
What must be backed up before exchanging the board?
Save the three structured-language threads, motion program, axis parameters, I/O map and master/slave settings associated with EU-LCP-0-0-1000-00 60014500. -
Which details help quote the correct ETEL card?
Provide the complete EU-LCP-0-0-1000-00 60014500 label, quantity, PCI host type, UltimET light version, connector photographs and destination country. -
Can a PCIe UltimET light card replace this PCI version?
Do not substitute the PCIe version from appearance alone. A distributor must verify host-bus format, connector arrangement, power input, control project and exact ETEL article number.
READY TO VERIFY YOUR PART?
Get a EU-LCP-0-0-1000-00 60014500 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
