
























Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
ELECTRONIC ASSEMBLY FOR GENIUS I/O BLOCK
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660EBA023
Application:Genius I/O Block System
Operating Voltage:18 to 56 Volts DC
Group Isolation:300 Volts
Power Rating:9.0 Watts
Internal CJC:0 to 60 Degrees Celsius
External CJC Range:-25 to +150 Degrees Celsius
LEDs:2 LEDs
Built-in Diagnostics:Yes
SERIES SIX GENIUS I/O BUS CONTROLLER
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660CBB902
Description:Series 6 PLC Bus Controller
Configuration:CPU or Handheld Monitor
Max I/O Capacity:31 I/O Devices
Phase Type:B
Max Connection Distance:2000 Feet
BUS SWITCHING MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BSM120
Description:Genius I/O Bus Switching Module
Application:Genius I/O Serial Bus
I/O Capacity:8
Operating Temperature Range:0 to 60 Degrees Celsius
Configuration:Handheld Monitor and CPU configuration
Serial Bus Connectors:2
Output Module
Manufacturer:GE Fanuc Emerson
Series:Versamax
Part Number:IC655MDL580
Product:Output Module
Output Points:16 Outputs
LED Indicators:1 per Output
Output Type:Relay
Key Position:A3 and B1
Typical Supply Current:152 mA
Maximum Supply Current:180 mA
Relay Output Module
IC630MDL380
DISCONTINUED BY MANUFACTURER
RELAY OUTPUT MODULE
16 CIRCUITS
MDL380 SERIES
NORMALLY OPEN
5-265 VAC/VDC MAXIMUM
4 AMPS CONTINUOUS
Output Module
Manufacturer:GE Fanuc Emerson
Series:Series Three
Part Number:IC630MDL376
Product Type:Output Module
Output Type:Isolated Outputs
Number of Outputs:8 Outputs
Voltage Type:AC
Voltage Rating:115/230V AC
Approximate Weight:1.1 lbs
LED Indicators:Included
Communications Module
Series:Series Six
Part Number:IC600YB945
Product Type:Communication Module
Input Type:ASCII
Rated Supply Voltage:5 to 12 Volts DC
User Memory Capacity:20K bytes
Status Indicators:6 LEDs
Wire Gauge Size:24 AWG (minimum)
Operating Temperature:0 to 60°C (Maximum)
Storage Temperature:0 to 70°C (Maximum)
Humidity Tolerance:5 to 95% (non-condensing)
Cable Data Rate:Up to 19.2 kilobits per second
EXPANSION RACK I/O CABLE
Series:Series Six Plus
Part Number:IC600WD002
Product Type:Expansion Rack I/O Cable
Cable Length:2 feet (0.6 meters)
Compatible Systems:Series Six Plus PLCs
Jacket Color:Black
Removable Connector Shells:Yes
Memory Module
Series:Series Six
Part Number:IC600LR648
Product Type:Memory Module
Primary Memory Capacity:32K
Short-Term Memory Capacity:16K
Modular Design:Yes
Expandable:Yes
Solid-State Construction:Yes
Operating Temperature:0 to 60 degrees Celsius
Storage Temperature:0 to 70 degrees Celsius
Rack Module
IC610CHS134A
DISCONTINUED BY MANUFACTURER
RACK
24VDC POWER SUPPLY (10 SLOTS)
INPUT MODULE
Series:Series Six
Part Number:IC600BF804
Product:Input Module
Input Voltage:115 Volts AC/DC
Number of Inputs:8
Input Groups:2 groups of 4 inputs
Power Voltage:5 Volts DC
Maximum Input Current:104 milliamps
Off to On Delay:10-20 milliseconds
On to Off Delay:20-50 milliseconds
Humidity Range:5-90%, non-condensing
Storage Temperature:-20 to 80°C (-4 to 176°F)
versatile ASCII/BASIC module
Manufacturer:GE Fanuc Emerson
Series:Series Six
Part Number:IC600BF949
Product Type:ASCII/BASIC Module
Floating Point Math Option:Full Function
Dual Communication Ports:Supported
Communication Options:RS-232C, RS-422
Maximum RS-232C Cable Length:50 Feet
Maximum RS-422 Cable Length:4000 Feet
MICRO CONTROLLER
Manufacturer:GE Fanuc Emerson
Series:VersaMax
Part Number:IC200UDR005
Module Type:PLC
Number of I/O Points:28 Points
Inputs:Sixteen 24VDC Inputs
Port 1:RJ-45/RS-232 Port
Port 2:DB-15/RS-485 Port
Discrete Output Module
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL744
Product Description:Discrete Output Module
Number of Points:32 Outputs
Number of groups:2
Point to Point Isolation:None
LED Indicators:One LED per point, OK and FLD PWR LEDs
Backplane Current Consumption:5 Volts, 140 milliamps
Protection:No internal fuse
MIXED MODULE
Series:VersaMax
Manufacturer:Emerson Automation / GE Fanuc (former)
Part Number:IC200ALG430
Description:Analog mixed module
Product Description:Analog combination module
Product Description:6-point combination I/O module
Channel to Channel Crosstalk Rejection:30 dB
No of analog input Channels:Four (4)
Wiring configuration:Input: Differential Output: Single Ended
Current:4-20 milliamperes
No of analog output channels:Two (2)
Input signal, nominal:4-20 mA
Update Rate:0.4 milliseconds
Update rate, Output:0.3 ms
Input filter response:5.0 ms
Input Filter Response Time:5 milliseconds
Resolution:12 bit
Voltage:250 Volts AC
Isolation:250/1500 Volts AC
Backplane current:50 mA @ 5VDC
Module Diagnostics:Loss of User Side Power
LED Indicators:FLD POWER; MODULE OK
Module width:Single slot
Mixed Analog Module
Brand:GE Fanuc
Series:Versamax
Part Number:IC200ALG432
Description:Analog mixed module
Voltage:10 Volts DC
Resolution:8 counts
Update rate:0.4 milliseconds
Response Time:5 milliseconds
Common Mode Voltage:0 Volts
CPU 331 Module
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693CPU331
Product Description:Modular CPU
Product type:CPU module
Processor type:80188
Clock speed:10 Megahertz
Typical scan rate:0.4 ms per 1K of Boolean logic
Processor speeds:10 MHz
Timers / Counters:680
Current load:350mA
Bus voltage:+5VDC
PLC OUTPUT MODULE
Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693MDL732
Product type:Digital I/O
Inrush current:4.78 Amps
Rated voltage:12 / 24 Volts DC
Peak input current:50 milliamps
Supply voltage:5 Volts DC
Output points:8
Peak output per point:0.5 Amps
TERMINAL BLOCK
Series:PACSystem RX3i
Manufacturer:GE Fanuc
Part Number:IC694TBB032
Product Description:Box style terminal block
Description:Terminal block
Terminals:36
Size:0.5 inches depth
Tightening Torque:7 lb-inch
Stripping length:0.310 inches of 7.87 mm
Wire size:14-26 AWG (solid or stranded)
Mounting:Chassis
Removable:Yes
Wire type:Solid or Stranded wire
Programming Cable
IC690ACC901
DISCONTINUED BY MANUFACTURER
CONVERTER KIT
MINI
W/ CABLE RS-485/RS-232
CONVERTER CABLE
Manufacturer:GE Fanuc Emerson
Series:Series 90-30
Part Number:IC690USB901
Product:Converter Cable
Series 90-20 PLCs:Compatible
Molded Cable Ends:Yes
Length:3 meters
OUTPUT MODULE
IC600BF910
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
SERIES SIX
115VAC
W/TERMINAL COVER
EXPANDED LOGIC CONTROL MODULE
IC600CB526
DISCONTINUED BY MANUFACTURER
EXPANDED LOGIC CONTROL MODULE
SERIES SIX
CB526
MODULE BOARD
OUTPUT MODULE
IC600BF929
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
SERIES SIX
10-50VDC
W/ LIGHTS
32 POINTS

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.