General Electric

OUTPUT MODULE

Series:VersaMax
Part Number:IC200ALG331
Output signal, nominal:4-20 mA; +/- 10 VDC
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
Backplane current:10 mA @ 5VDC; 115 mA @ 3.3 V
Configurable output default:Hold Last State; 0 (configurable)
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED

CPU MODULE

Series:Series 90-30
Part Number:IC693CPU363
User memory:240K Bytes
CPU type:Single slot CPU module
Register memory:240 kilobytes
Serial port:RS-485 (via power supply
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Serial ports:3
Clock speed:25 Megahertz
Microprocessor:80386EX
Discrete inputs:2048
Discrete outputs:2048
Type of Memory Storage:RAM and Flash

ANALOG INPUT/OUTPUT MODULE

ANALOG INPUT/OUTPUT MODULE
I/O PACK
FOR A GE SPEEDTRONIC MKVIE 
GAS TURBINE CONTROL
Ambient Temperature Range:-40 to 158°F
Analog Transmitter Power:22.8 VDC

Serial Communications I/O Pack

Input Voltage: 24V DC nominal
Power Consumption: 1.5 W
Current Draw:24V DC: 90 mA
Operating Temperature: 
-40°C to +70°C (-40°F to +158°F)
Storage Temperature: 
-40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% (non-condensing)

THERMOCOUPLE INPUT UNIT

THERMOCOUPLE INPUT UNIT
MARK VIE
I/O PACK
POWER SUPPLY / 0.16 AMP / 28 VDC
FOR SPEEDTRONIC MKVIE GAS TURBINE CONTROL

I/O pack

Nominal: 24 V DC
Maximum: 32 V DC
Maximum per output: 0.5 A
Total current limit: 6 A
Operating Temperature Range: -30°C to +65°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% RH (non-condensing)

PAC8000 Power Supply

PAC8000 Power Supply 
for Class 1 Div 2
(5A 12VDC & 5A 24VDC AC input)

INPUT MODULE

Series:Series 90-30
Part Number:IC693MDL645
Module type:Positive / Negative Discrete input
Input Voltage Range:0-30 VDC
Nominal Input voltage:24VDC
Input Current (mA):7 mA
Number of points:Sixteen (16)
Module width:Single (1) slot
Module type:Discrete input
Power Type:DC
Input Voltage Range:0-30 VDC
Input Current (mA):7
Number of points:16
Response Time (ms):7 ms on, 7 ms off

Power Supply

IC695PSA040
RX3I POWER SUPPLY
120/240VAC
125VDC
40 WATTS
OCCUPIES TWO SLOTS ON SYSTEM BASE

DS3800HVDB1K1G
DISCONTINUED BY MANUFACTURER
VIDEO DRIVER BOARD
20-PIN CONNECTOR
EPROM MODULES

Ethernet interface module

Series:RX3i PacSystem
Part Number:IC695ETM001 IC695ETM001-LDAB
Product Type:Ethernet interface module
Compatibility:PACSystems RX3i
Ethernet Ports:2x 10/100 Mbps
Serial RS-232:Yes
Serial Data Rates:1200 bps to 115200 bps
Hot-swappable:Yes
Autosensing Ports:Yes
Ethernet Processor speed:200 MHz

Axis Positioning Module

Series:Series 90-30
Manufacturer:GE Fanuc (Former); Emerson Automation (Current)
Part Number:IC693APU301
Product Description:Axis Positioning Module (APM)
No. of Axes:1 Axis
Servo Loop Update:1 millisecond
Slot width:Single slot
Compatibility:Series 90-30 PLCs
No. of modules per baseplate:Three (3)
Product Lifecycle:Discontinued

High Speed Counter Module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693APU300
Product Description:High Sped counter module
No of input channels:Twelve (12) source inputs
Maximum Count Rate:80 kiloHertz
Input signal voltage:5 VDC; 10VDC - 30 VDC
Minimum Count Rate:20 kiloHertz
Input count frequency:80 kHz
Input frequency:8 kHz
Isolation:250 Volts AC
Input/Output Type:Positive Logic
No. of Logic Inputs:12
Maximum count rate:up to 200 kHz
Input Voltage Range:5 Volts DC, 10-30 Volts DC

Relay Output Block

Manufacturer:GE Fanuc
Series:Genius I-O
Part Number:IC660BBR100
Product Type:Relay Output Block
Output Block Type:Normally Closed
Number of Outputs:16

Programmable Coprocessor module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PCM301
Memory Backup:Lithium Battery provided
Internal Power:425 mA at 5 VDC
Slot width:Single slot
Number of LED lights:3
Battery Backed RAM:192 K or EPROM option
Total memory:192K
Communication protocol:Modbus; CCM
Internal Power:425 mA at 5 VDC
Number of LED lights:3
Total memory:192K
Mounting location:CPU baseplate only
MegaBasic memory:47K
LED indicators:OK; US1 and US2

High Capacity Power Supply

Part Number:IC693PWR330
Series:90-30 PLC
Brand:GE Fanuc
Product Type:High-capacity power supply
Protocol Support:RS485
No. of Outputs:Three (3)
Nominal Rated Voltage:120/240 VAC or 125 VDC
Input Voltage Range, AC:85 to 264 VAC
Input Voltage Range, DC:100 to 300 VDC
Description:Power supply device
Voltage:120/240 Volts AC , 125 VDC
Power:30 watts
Communication:RS 485
Standards:CE, UL
Number of connection terminals:6

Ethernet NIU Module

Manufacturer:GE Fanuc
Part Number:IC695NIU001-ADAD
Module Type:Network Interface
Number of Slots:1 (single slot)
Backplane Support:Dual:  RX3i PCI and 90-30 Serial

Genius Bus Interface

Series:Series 90-30
Part Number:IC693BEM331
Current consumption:<300mA at +5V DC
Number of LEDs:2 (OK and COMM OK)
Power Supply:5 V DC from the Series 90-30 Backplane
Compatible Series 6 controllers:IC660CBB902F/903F
Number of I/Os:31 Maximum
Maximum Data Rate:128 bytes
IP rating:IP 20

Network Interface

IC695NIU001-ACAD
Module Type:Network Interface
Number of Slots:1 (single slot)
Backplane Support:Dual:  RX3i PCI and 90-30 Serial
Communication Ports:(2) RS-232 and RS-485

High Density Discrete input module

Series:PACSystem RX3i
Manufacturer:GE Fanuc
Part Number:IC694MDL655
Type:Input module
No of Channels:Thirty-Two (32)
No. of groups:Four (4)
Inputs:32
Logic:Positive/Negative
Input voltage range:0-30 VDC
Rated Voltage:48V DC
Input signal range:0-30 VDC
Input current:7.0 mA at rated voltage
Input Voltage Range:0-60V DC
Nominal Input voltage:24 VDC
Input Current:1.7 mA at 48V DC
Input current:7 mA per channel
Off–state Voltage:0-5 VDC
Cable Length:30 m
On State Voltage:11.5 - 30 VDC
Isolation:250 V AC
On state current:3.2 mA
Off state current:1.1 mA
On response time, typical:2 ms
Off response time, maximum:2 ms
Product Lifecycle Status:Active

I/O Terminal strip

Brand:GE Fanuc
Series:Versamax
Part Number:IC200TBM002
Type:I/O Terminal strip
Terminals:18
Style:Box-Style
DIN Rail:Compatible
Panel Mounting:Compatible
Protective Door:Yes
Printed Wiring Card:Yes

Power Supply module

Series:PACSystem RX7i
Manufacturer:GE Fanuc
Part Number:IC698PSA350
Nominal Rated Voltage:120/240 VAC, 125 VDC
Part Number:IC698PSA350
Power:100 watts
Input Voltage Range:85 to 264 VAC; 100-150VDC
AC Input Frequency:47-63 Hz
Temperature:0-60 degrees celsius
Ride through time:15 ms
Holdup time:5 ms
Slot Assignment:Slot 0
Product lifecycle:Active
GND Wire:12 AWG
Isolation:1500 Volts DC
Output Voltage:5.1 VDC; +12 VDC; - 12VDC

PROCESSOR BOARD

PROCESSOR BOARD
MARK 5
TURBINE CONTROL
MULTI INPUT/ OUTPUT
ON BOARD RAM

Control Circuit Board