PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- Fanuc CNC
- A20B-3300-0281/04B
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A20B-3300-0281/04B i-series LCD graphics control board
FANUC A20B-3300-0281/04B is an i-series graphics control board for an 8.4-inch color LCD operator display. The board provides the display-processing and Ethernet functions used with documented Series 16i-B, 18i-B and 21i-B CNC configurations.
The /04B hardware marking identifies the installed board revision and must be retained when ordering. Replacement requires matching the host CNC, LCD interface, connector positions, graphics configuration and Ethernet settings before controlled power-up and display testing.
The /04B hardware marking identifies the installed board revision and must be retained when ordering. Replacement requires matching the host CNC, LCD interface, connector positions, graphics configuration and Ethernet settings before controlled power-up and display testing.
BEFORE YOU BUY
Confirm the complete i-series LCD graphics control board
ACTUAL APPLICATIONS
Application fields for A20B-3300-0281/04B
Three broad application areas are expanded below with two related uses for A20B-3300-0281/04B.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Continuous Production
Discrete manufacturing and assembly productionContinuous industrial production and processing -
02 · AUTOMOTIVE MANUFACTURING
Vehicle and Automotive Component Manufacturing
Vehicle assembly and automotive component productionAutomotive electronics and precision manufacturing -
03 · ELECTRONICS MANUFACTURING
Electronic Component and Precision Product Manufacturing
Electronic component and control product manufacturingPrecision electronics and instrumentation production
Technical specifications for A20B-3300-0281/04B
-
Product ModelA20B-3300-0281/04B
-
Product ParametersI-series lcd graphics control board
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Board familyA20B-3300-0281
-
Hardware revision/04B
-
Functional classLCD graphics control
-
Display format8.4-inch color LCD
-
Controller familiesSeries 16i-B, 18i-B and 21i-B
-
Network interfaceIntegrated Ethernet
-
InstallationPlug-in CNC control PCB
-
Host connectionMain controller motherboard
-
Display outputColor graphics interface
-
Configuration basisHost CNC hardware and software
-
Connector verificationMatch installed connector allocation
-
Revision verificationRetain complete /04B marking
-
CommissioningDisplay, key response and Ethernet checks
-
Service roleReplacement graphics control board
-
LifecycleLegacy FANUC i-series service part
View all additional
Alternative Names
A20B-3300-0281/04B
FANUC A20B-3300-0281/04B
FANUC Series 16i-B, 18i-B and 21i-B
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate A20B-3300-0281/04B within the documented FANUC Series 16i-B, 18i-B and 21i-B configuration
Confirm the complete A20B-3300-0281/04B identity, installed host platform and module position before connection. Match every documented interface to the approved FANUC Series 16i-B, 18i-B and 21i-B hardware and configuration.
Record connector allocation, field wiring, shielding, grounding, addressing and settings before removal. Preserve keyed connectors and cable identification while installing the replacement module.
After installation, restore the approved configuration and complete controlled power-up, diagnostics, communication, measurement and functional checks before return to service.
Features:
- Exact A20B-3300-0281/04B identity
- Recorded host and connection configuration
- Controlled commissioning and verification
A20B-3300-0281/04B requires the documented host platform, connections and configuration before system integration.
INTERCHANGEABILITY
Verify A20B-3300-0281/04B before replacement
Record the complete A20B-3300-0281/04B marking, hardware revision, installed slot and host-platform identity before removal. Similar family codes are not evidence of direct interchangeability.
Compare interfaces, connector positions, channel allocation, electrical ratings, firmware or configuration dependencies and approved accessories with the installed assembly.
Back up the current settings, retain cable identification and complete controlled power-up, diagnostic and functional tests after installation before returning the equipment to service.
Features:
- Complete product and revision identity
- Recorded wiring and host configuration
- Post-installation functional verification
Replacement of A20B-3300-0281/04B requires verification against the installed host, connections and approved configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for A20B-3300-0281/04B
- Document scope matched to the complete product identity
- Directory links by manufacturer and product index
Documentation for A20B-3300-0281/04B must match the installed equipment and complete product identity before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size37.0 x 28.0 x 5.0 cm
-
Net weight1.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A20B-3300-0281/04B
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is A20B-3300-0281/04B?
A20B-3300-0281/04B is a i-series LCD graphics control board for the FANUC Series 16i-B, 18i-B and 21i-B. -
Which identity must be used when ordering A20B-3300-0281/04B?
Use the complete A20B-3300-0281/04B marking and compare it with the installed label and project records. -
Can a similar family item replace A20B-3300-0281/04B?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing A20B-3300-0281/04B?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when A20B-3300-0281/04B arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for FANUC Series 16i-B, 18i-B and 21i-B and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a A20B-3300-0281/04B quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
A20B-3300-0281/04BI-series lcd graphics control boardManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
