PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE 90-30 Series PLC
- IC693CPU350-DH
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC693CPU350-DH Single-slot CPU 350 controller
GE Fanuc IC693CPU350-DH is a single-slot CPU350 controller for Series 90-30 systems. Its 25 MHz 80386EX processor and 32 KB user memory execute the stored control application.
The controller supports up to eight baseplates, 2048 discrete inputs and 2048 discrete outputs. RAM and flash storage, SNP/SNP-X slave communication and a battery-backed real-time clock support application retention, programming access and time-based functions.
The controller supports up to eight baseplates, 2048 discrete inputs and 2048 discrete outputs. RAM and flash storage, SNP/SNP-X slave communication and a battery-backed real-time clock support application retention, programming access and time-based functions.
BEFORE YOU BUY
Confirm the complete single-slot cpu 350 controller
ACTUAL APPLICATIONS
Application context for IC693CPU350-DH
IC693CPU350-DH supports compatible Series 90-30 installations across the application categories below, subject to system configuration.
-
01 · OIL & GAS
Petroleum Exploration and Natural Gas Transmission
Offshore Petroleum DevelopmentCross-Regional Gas Transmission -
02 · POWER GENERATION
Thermal Electricity and Hydroelectric Power Generation
Combined-Cycle Power GenerationPumped-Storage Hydropower -
03 · METALS & MINING
Metal Production and Mineral Resource Extraction
Nonferrous MetallurgyNonmetallic Mining
Technical specifications for IC693CPU350-DH
-
Product ModelIC693CPU350-DH
-
Product ParametersSingle-slot CPU 350 controller
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Processor80386EX
-
Processor speed25 MHz
-
User memory32 KB
-
Typical Boolean scan0.22 ms per 1K logic
-
Discrete inputs2,048 points
-
Discrete outputs2,048 points
-
Register memory9,999 words
-
Analog inputs2,048 words
-
Analog outputs512 words
-
Baseplates8 maximum
-
Backplane load670 mA at 5 V DC
-
Serial protocolSNP and SNP-X slave
-
Memory storageRAM and flash
-
Real-time clockBattery backed
View all additional
Alternative Names
IC693CPU350-DH
Series 90-30 single-slot CPU 350 controller
90-30 80386EX processor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC693CPU350-DH single-slot cpu 350 controller
IC693CPU350-DH provides the documented function of a single-slot CPU 350 controller in the Series 90-30 platform. Match the complete article and revision with the host architecture before engineering approval.
Review processor (80386EX), processor speed (25 MHz) and user memory (32 KB) against the electrical and functional design.
Apply the documented connection and supply limits, validate typical boolean scan (0.22 ms per 1K logic) and retain the completed test record with the system documentation.
Features:
- Confirm processor: 80386EX
- Match processor speed: 25 MHz
- Validate user memory: 32 KB
The IC693CPU350-DH single-slot cpu 350 controller requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC693CPU350-DH single-slot cpu 350 controller
Record the full IC693CPU350-DH identity, installed revision, wiring and configuration before removal. Isolate the applicable power and field circuits under the site maintenance procedure.
Compare the replacement article's discrete inputs (2,048 points) and discrete outputs (2,048 points) with the removed unit and purchase record.
After installation, inspect connection integrity, confirm register memory (9,999 words) and verify analog inputs (2,048 words) before return to service.
Features:
- Record discrete inputs: 2,048 points
- Inspect discrete outputs: 2,048 points
- Test analog inputs: 2,048 words
The IC693CPU350-DH single-slot cpu 350 controller requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC693CPU350-DH single-slot cpu 350 controller must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 x 13.0 x 13.5 cm
-
Shipping weight0.32 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC693CPU350-DH
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Will a CPU350 project fit the memory in IC693CPU350-DH?
IC693CPU350-DH provides 32 KB of user memory. Compare the saved application size and data allocation before scheduling the CPU exchange. -
Can IC693CPU350-DH replace a CPU solely because both occupy one slot?
Slot size does not establish replacement suitability. For IC693CPU350-DH, compare the CPU350 application, 80386EX platform, I/O allocation and installed revision. -
Which programming connection is available to IC693CPU350-DH?
IC693CPU350-DH supports SNP and SNP-X slave communication. Confirm the programming adapter and serial settings against the CPU350 installation documentation. -
What must be retained before powering down IC693CPU350-DH?
Back up the IC693CPU350-DH logic, configuration and required register values; also record the battery-backed real-time clock settings. -
How many expansion baseplates can a IC693CPU350-DH system address?
The documented IC693CPU350-DH configuration allows up to eight baseplates. Reconcile rack numbering and expansion cabling with the project. -
Why should the 5 V budget be recalculated for IC693CPU350-DH?
IC693CPU350-DH draws 670 mA from the 5 V backplane. Include the complete rack load when checking the installed power supply. -
Which CPU350 details should accompany a IC693CPU350-DH purchase request?
Send the full IC693CPU350-DH label, CPU350 project backup, baseplate arrangement and required revision so procurement can specify the intended spare. -
What confirms a supplied IC693CPU350-DH matches the ordered DH revision?
Check that the received label reads IC693CPU350-DH and inspect the CPU connectors and battery connection before restoring the approved application.
READY TO VERIFY YOUR PART?
Get a IC693CPU350-DH quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC693CPU350-DHSingle-slot CPU 350 controllerManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
